Releases: marcone/teslausb
teslausb-20231012-bullseye
Prebuilt image based on the Raspberry Pi OS "Bullseye" release, for Raspberry Pi Zero W, Raspberry Pi Zero 2 W, and Raspberry Pi 4B.
To use a "Bookworm" or later release, follow the instructions at https://github.com/marcone/teslausb/wiki/Installation to install TeslaUSB on an official Raspberry Pi image. Note that some features may not work on Bookworm, so this is not recommended at this time.
(source code download links are included automatically by github, and are not needed to flash the image)
teslausb-20211106.2
One-step-setup flashable image based on the Raspbian "Buster" release, for Raspberry Pi Zero W, Raspberry Pi Zero 2 W, and Raspberry Pi 4B.
This is the same as the previous image, but updates the sample config to the January 28 2023 version.
See https://github.com/marcone/teslausb/blob/main-dev/doc/OneStepSetup.md for setup instructions.
To use a "Bullseye" release, use the bullseye prebuilt image or follow the instructions at https://github.com/marcone/teslausb/wiki/Installation to install TeslaUSB on an official Raspberry Pi image.
(source code download links are included automatically by github, and are not needed to flash the image)
teslausb-20211106
One-step-setup flashable image based on the Raspbian "Buster" release, for Raspberry Pi Zero W, Raspberry Pi Zero 2 W, and Raspberry Pi 4B.
This release adds support for the Raspberry Pi Zero 2 W.
See https://github.com/marcone/teslausb/blob/main-dev/doc/OneStepSetup.md for setup instructions.
(source code download links are included automatically by github, and are not needed to flash the image)