Skip to content

A collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.

License

Notifications You must be signed in to change notification settings

makersmakingchange/PVC-Accessible-Mounting-System

Repository files navigation

PVC Assistive Mounting System

The PVC Assistive Mounting System is a collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.

More info at

Configurations

LipSync Desk Mount

The LipSync Desk Mount provides a low cost, adjustable system to mount the LipSync to a flat surface like a table or desk.

LipSync Desk Mount

Small Button Mount

The Small Button Mount is a simple, inexpensive mounting solution to position a small button on a flat surface.

Small Button Mount

Large Button Mount

Work-in-progress

Components

Camera Quick Clamp

The PAMS Camera Quick Clamp is a 3D printed adapter for attaching an assistive device to a section of 1/2 inch PVC piping. The clamp has a ¼”- 20 UNC camera thread stud that is compatible with various assistive devices and/or camera mount adapters. The clamp can easily be installed, adjusted, and removed by hand.

PAMS Camera Quick Clamp

Super Clamp Adapter

Work-in-progress

Round Tubing Clamp

Work-in-progress

Wheelchair Rail adapter

Work-in-progress

Resources

More information for working with PVC: PVC Resources

License

Creative Commons Licence
PVC Accessible Mounting System by Neil Squire is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

About Us

Makers Making Change Logo

Makers Making Change is an initiative of Neil Squire, a Canadian non-profit that helps people with disabilities.

We are committed to creating a network of volunteer makers who support people with disabilities in their communities through 3D printing assistive devices. Check out our library of free, open-source assistive technologies with parts and build instructions.

Contact Us

For technical questions, to get involved, or share your experience we encourage you to visit the MMC Forum, or contact [email protected]

About

A collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published