M5StickC sensor information (accuracy, gyro, attitude (rotation)) is transmitted by UDP on Wifi.

日本語はこちら

I am using some of AxisOrange's code. I think it is better to use this for reference of connection and code via Bluetooth.

• PlatformIO
• mahony
• M5StickC : MIT License
• Wifi : esp32 Wifi support. MIT Licnese.
• WiFiUdp : Library to send/receive UDP packets. MIT Licnese.

1. git clone
2. set the wifi information and the destination IP (set https://github.com/machidyo/Ryap/blob/master/src/main.cpp#L13-L15）
3. install to M5StickC
4. confirm to connect to Wifi (*1)

• Make sure you see the IP as --ryap--192.198.137.143
• If you cannot connect to Wifi, only --ryap-- will be displayed. Please review the SSID, password, etc.
• IP is a sample and depends on the environment.

1. git clone [RypaUnity] (https://github.com/machidyo/RyapUnity)
2. Open and run in Unity.
3. Make sure the M5StickC on the Unity screen moves as the M5StickC moves.
4. If the movement is correct but the orientation is different in the first place, make the M5StickC horizontal once, press the A button to adjust the initial posture, and then check again. Demonstrated in the middle of the video.