• D.W. Platform from Next Generation Robotics srl (add website)

• 1 YD Lidar

• 1 Camera connected through CSI (Camera Serial Interface)

• 2 Realsense D435i (optional)

It is needed to:

1. Install Ubuntu 18.04.5 LTS

2. Install CUDA and NVIDIA drivers

3. Install ROS

4. Build Opencv with CUDA enabled (optional)

5. Install Realsense SDK (optional)

6. Build RTABMAP (optional)

7. Install Realsense-ROS wrapper (optional)

To do so, you can follow these guides, based on the kind of pc you are using:

• Nvidia Jetson Xavier NX

  https://github.com/abcamiletto/XavierNX-setup-realsense/wiki/Xavier-NX-Setup-Guide

• Ubuntu Desktop 18.04.5 LTS with NVIDIA GTX or RTX

  https://github.com/abcamiletto/XavierNX-setup-realsense/wiki/Ubuntu-Desktop-Setup-Guide

1. gscam:

    $ cd catkin_ws/src
    $ git clone https://github.com/ros-drivers/gscam
   

modify the file ./gscam/Makefile with this string:

  EXTRA_CMAKE_FLAGS = -DUSE_ROSBUILD:BOOL=1 -DGSTREAMER_VERSION_1_x=On

2. image_common:

    $ cd catkin_ws/src
    $ git clone https://github.com/ros-perception/image_common
   

3. ydlidar_ros-master:

    $ cd catkin_ws/src
    $ git clone -b master --single-branch https://github.com/YDLIDAR/ydlidar_ros
    $ cd
    $ sudo mkdir /dev/ydlidar
    $ cd catkin_ws/src/ydlidar_ros/startup
    $ sudo chmod 777 ./*
    $ sudo sh initenv.sh
   

in case of errors ignore them.

4. joy:

    $ sudo apt-get update
    $ sudo apt-get install ros-melodic-joy
    $ sudo apt-get install ros-melodic-joystick-drivers
   

1. Add the following lines at the end of .bashrc file (hidden file in home directory):

    export ROS_MASTER_URI=http:https://ipaddress:port
    export ROS_IP=ipaddress
   

where ipaddress is the wifi board ip address (example: 192.168.1.100) and the port is the one used by ROS for communication (standard port: 11311)

2. set the manual IP Address of your wifi board accordingly (edit connections --> IPv4)

3. set the manual IP Address of your ethernet board:

   • IP: 192.168.0.100

   • Sub: 255.255.192.0

   • Gateway: 192.168.0.1

1. Adjust Robot Parameters in the file: ./udp_controller/src/kinematics_matrix.py

2. Execute the launch file:

    $ roslaunch state_machine sm_startup.launch
   

3. Finally launch starteleop.launch on the remote pc (see DiffWheel_Robot_Teleop package).

1. Execute the launch file:

    $ roslaunch state_machine full_setup.launch
   

2. Define the following arguments (default values in parentheses)

    use_robot_local (false)   # start robot localization
    local (true)              # control the robot locally
    load_map (true)           # load the global map
    use_rtab_map (true)       # start rtab_map