English | 简体中文 | 繁體中文 | 日本語 | Deutsch | 한국어
ST7920 LCD controller/driver IC can display alphabets, numbers, Chinese fonts and self-defined characters. It supports 3 kinds of bus interface, namely 8-bit, 4-bit and serial. All functions, including display RAM, Character Generation ROM, LCD display drivers and control circuits are all in a one-chip solution. With a minimum system configuration, a Chinese character display system can be easily achieved.ST7920 includes character ROM with 8192 16x16 dots Chinese fonts and 126 16x8 dots half-width alphanumerical fonts. Besides, it supports 64x256 dots graphic display area for graphic display (GDRAM). Mix-mode display with both character and graphic data is possible. ST7920 has built-in CGRAM and provide 4 sets software programmable 16x16 fonts.ST7920 has wide operating voltage range (2.7V to 5.5V). It also has low power consumption. So ST7920 is suitable for battery-powered portable device.ST7920 LCD driver consists of 32-common and 64-segment.
LibDriver ST7920 is the full function driver of ST7920 launched by LibDriver.It provides the functions of drawing single point, filling block, image display, etc. LibDriver is MISRA compliant.
/src includes LibDriver ST7920 source files.
/interface includes LibDriver ST7920 GPIO platform independent template.
/test includes LibDriver ST7920 driver test code and this code can test the chip necessary function simply.
/example includes LibDriver ST7920 sample code.
/doc includes LibDriver ST7920 offline document.
/datasheet includes ST7920 datasheet.
/project includes the common Linux and MCU development board sample code. All projects use the shell script to debug the driver and the detail instruction can be found in each project's README.md.
/misra includes the LibDriver MISRA code scanning results.
Reference /interface GPIO platform independent template and finish your platform GPIO driver.
Add the /src directory, the interface driver for your platform, and your own drivers to your project, if you want to use the default example drivers, add the /example directory to your project.
You can refer to the examples in the /example directory to complete your own driver. If you want to use the default programming examples, here's how to use them.
#include "driver_st7920_basic.h"
uint8_t res;
res = st7920_basic_init();
if (res != 0)
{
st7920_interface_debug_print("st7920: init failed.\n");
return 1;
}
res = st7920_basic_write_point(0, 0, 1);
if (res != 0)
{
st7920_interface_debug_print("st7920: write point failed.\n");
(void)st7920_basic_deinit();
return 1;
}
res = st7920_basic_clear();
if (res != 0)
{
st7920_interface_debug_print("st7920: clear screen failed.\n");
(void)st7920_basic_deinit();
return 1;
}
res = st7920_basic_string(0, 0, "LibDriver");
if (res != 0)
{
st7920_interface_debug_print("st7920: show string failed.\n");
(void)st7920_basic_deinit();
return 1;
}
res = st7920_basic_rect(0, 0, 32, 32, 1);
if (res != 0)
{
st7920_interface_debug_print("st7920: draw rect failed.\n");
(void)st7920_basic_deinit();
return 1;
}
res = st7920_basic_deinit();
if (res != 0)
{
st7920_interface_debug_print("st7920: deinit failed.\n");
return 1;
}
return 0;
The image extraction format is as follows and every pixel stored in one byte.
#include "driver_st7920_advance.h"
uint8_t res;
uint8_t gs_image[8192];
res = st7920_advance_init();
if (res != 0)
{
st7920_interface_debug_print("st7920: init failed.\n");
return 1;
}
res = st7920_advance_clear();
if (res != 0)
{
st7920_interface_debug_print("st7920: clear screen failed.\n");
(void)st7920_advance_deinit();
return 1;
}
res = st7920_advance_string(0, 0, "LibDriver");
if (res != 0)
{
st7920_interface_debug_print("st7920: show string failed.\n");
(void)st7920_advance_deinit();
return 1;
}
res = st7920_advance_write_point(0, 0, 1);
if (res != 0)
{
st7920_interface_debug_print("st7920: write point failed.\n");
(void)st7920_advance_deinit();
return 1;
}
res = st7920_advance_rect(0, 0, 32, 32, 1);
if (res != 0)
{
st7920_interface_debug_print("st7920: draw rect failed.\n");
(void)st7920_advance_deinit();
return 1;
}
res = st7920_advance_picture(0, 0, 127, 63, gs_image);
if (res != 0)
{
st7920_interface_debug_print("st7920: draw picture failed.\n");
(void)st7920_advance_deinit();
return 1;
}
res = st7920_advance_deinit();
if (res != 0)
{
st7920_interface_debug_print("st7920: deinit failed.\n");
return 1;
}
return 0;
Online documents: https://www.libdriver.com/docs/st7920/index.html.
Offline documents: /doc/html/index.html.
Please refer to CONTRIBUTING.md.
Copyright (c) 2015 - present LibDriver All rights reserved
The MIT License (MIT)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
Please send an e-mail to [email protected].