Skip to content

Arduino,CircuitPython,Micropython, esp-idf library for x-powers power management series

License

Notifications You must be signed in to change notification settings

lewisxhe/XPowersLib

Repository files navigation

 __   __     _____                           _      _ _
 \ \ / /    |  __ \                         | |    (_) |
  \ V /_____| |__) |____      _____ _ __ ___| |     _| |__
   > <______|  ___/ _ \ \ /\ / / _ \ '__/ __| |    | | '_ \
  / . \     | |  | (_) \ V  V /  __/ |  \__ \ |____| | |_) |
 /_/ \_\    |_|   \___/ \_/\_/ \___|_|  |___/______|_|_.__/

Build esp-idf Build PlatformIO Build Arduino arduino-library-badge

LICENSE ISSUES FROK STAR releases

🎉 LilyGo invests time and resources to provide this open source code, please support LilyGo 
and open source hardware by purchasing products from LilyGo!
Written by Lewis He for LilyGo. MIT license, all text above must be included in 
any redistribution

❗️❗️❗️ WARN:

⚠️ Please do not run the example without knowing the external load voltage of the PMU,
it may burn your external load,please check the voltage setting before running the example,
if there is any loss,please bear it by yourself

✨ Library specially written for XPowers, supporting CircuitPython, Micropython, Arduino, ESP-IDF

✨ Through esp32,esp32s3 verification,other platforms have not been tested. Due to the many functions of the chip,it cannot be verified one by one.

Chip Resource List

CHIP AXP192 AXP202 AXP2101 Remarks
DC1 0.7V-3.5V /1.2A X 1.5-3.4V /2A
DC2 0.7-2.275V /1.6A 0.7-2.275V /1.6A 0.5-1.2V,1.22-1.54V /2A
DC3 0.7-3.5V /0.7A 0.7-3.5V /1.2A 0.5-1.2V,1.22-1.54V,1.6-3.4V /2A
DC4 x x 0.5-1.2V,1.22-1.84V /1.5A
DC5 x x 1.2V,1.4-3.7V /1A
LDO1(VRTC) 3.3V /30mA 3.3V /30mA 1.8V /30mA
LDO2 1.8V-3.3V /200mA 1.8V-3.3V /200mA x
LDO3 1.8-3.3V /200mA 0.7-3.5V /200mA x
LDO4 X 1.8V-3.3V /200mA x
LDO5/IO0 1.8-3.3V /50mA 1.8-3.3V /50mA x
ALDO1 x x 0.5-3.5V /300mA
ALDO2 x x 0.5-3.5V /300mA
ALDO3 x x 0.5-3.5V /300mA
ALDO4 x x 0.5-3.5V /300mA
BLDO1 x x 0.5-3.5V /300mA
BLDO2 x x 0.5-3.5V /300mA
DLDO1 x x (LDO Mode)0.5-3.3V/ 0.5-1.4V/300mA,(SW Mode)Switch Function Dependent on DC1
DLDO2 x x (LDO Mode)0.5-3.3V/ 0.5-1.4V/300mA,(SW Mode)Switch Function Dependent on DC4
CPUSLDO x x 0.5-1.4V /30mA Dependent on DC4

AXP2101 Notes:

  • Whether DLDO1/DLDO2/RTCLDO2/GPIO1 can be used depends on the chip. It is not available by default. RTCLDO1 has a default voltage, which is generally 1.8V by default. The voltage value cannot be changed or turned off through the register.