The official Nomad learning guides provide excellent examples for deploying workloads with Docker but very few showcase orchestration of non-containerized workloads. As a result of this I actually found it a little tough to get some of my first jobs spun-up.
- https://learn.hashicorp.com/tutorials/consul/get-started-install
- https://learn.hashicorp.com/tutorials/nomad/get-started-install
Both the nomad
and consul
binaries will run in the foreground by default. This is great because you can watch log lines as they come in and troubleshoot any issues encountered while working through these workshops. However, this also means you'll want to use tmux
or using some kind of native tab or window management to keep these running in a session other than the one you'll be using to edit, plan, and run Nomad jobs.
- Start the Consul server in
dev
mode:$ consul agent -dev -datacenter dev-general -log-level ERROR
- Start the Nomad server in
dev
mode:$ sudo nomad agent -dev -bind 0.0.0.0 -log-level ERROR -dc dev-general
- Open the Consul web UI: https://localhost:8500/ui
- Open the Nomad web UI: https://localhost:4646/ui
This repository contains both the starting job specification and examples of how your specification should look after we complete each of the workshops.
Don't worry if it feels like a lot, it is. It took me a few days of working with Nomad and Consul to get a good sense of what each of these stanzas was actually doing. Feel free to move forward even if you feel a little lost. You can always come back and reference it as needed.
// 'variable' stanzas are used to declare variables that a job specification can
// have passed to it via '-var' and '-var-file' options on the nomad command
// line.
//
// https://www.nomadproject.io/docs/job-specification/hcl2/variables
variable "config-yml-template" {
type = string
}
// 'job' is the top-most configuration option in the job specification.
//
// https://www.nomadproject.io/docs/job-specification/job
job "hello-world" {
// datacenters where you would like the hello-world to be deployed.
//
// https://www.nomadproject.io/docs/job-specification/job#datacenters
datacenters = ["dev-general"]
// 'type' of Scheduler that Nomad will use to run and update the 'hello-world'
// job. We're using 'service' in this example because we want the
// 'hello-world' job to be run persistently and restarted if it becomes
// unhealthy or stops unexpectedly.
//
// https://www.nomadproject.io/docs/job-specification/job#type
type = "service"
// 'group' is a series of tasks that should be co-located (deployed) on the
// same Nomad client.
//
//https://www.nomadproject.io/docs/job-specification/group
group "greeter" {
// 'count' is the number of allocations (instances) of the 'hello-world'
// 'greeter' tasks you want to be deployed.
//
// https://www.nomadproject.io/docs/job-specification/group#count
count = 1
// 'network' declares which ports need to be available on a given Nomad
// client before it can allocate (deploy an instance of) the 'hello-world'
// 'greeter'
//
// https://www.nomadproject.io/docs/job-specification/network
network {
// https://www.nomadproject.io/docs/job-specification/network#port-parameters
port "http" {
static = 1234
}
}
// 'service' tells Nomad how the 'hello-world' 'greeter' allocations should be
// advertised (as a service) in Consul and how Consul should determine that
// each hello-world greeter allocation is healthy enough to advertise as
// part of the Service Catalog.
//
// https://www.nomadproject.io/docs/job-specification/service
service {
name = "hello-world-greeter"
port = "http"
// 'check' is the check used by Consul to assess the health or readiness
// of an individual 'hello-world' 'greeter' allocation.
//
// https://www.nomadproject.io/docs/job-specification/service#check
check {
name = "ready-tcp"
type = "tcp"
port = "http"
interval = "3s"
timeout = "2s"
}
// 'check' same as the above except the status of the service depends on
// the HTTP response code: any 2xx code is considered passing, a 429 Too
// ManyRequests is warning, and anything else is a failure.
check {
name = "ready-http"
type = "http"
port = "http"
path = "/"
interval = "3s"
timeout = "2s"
}
}
// 'task' defines an individual unit of work for Nomad to schedule and
// supervise (e.g. a web server, a database server, etc).
//
// https://www.nomadproject.io/docs/job-specification/task
task "greet" {
// 'driver' is the Task Driver that Nomad should use to execute our
// 'task'. For shell commands and scripts there are two options:
//
// 1. 'raw_exec' is used to execute a command for a task without any
// isolation. The task is started as the same user as the Nomad
// process. Ensure the Nomad process user is sufficiently restricted in
// Production settings.
// 2. 'exec' uses the underlying isolation primitives of the operating
// system to limit the task's access to resources
// 3. There are many more here: https://www.nomadproject.io/docs/drivers
//
// https://www.nomadproject.io/docs/job-specification/task#driver
driver = "raw_exec"
config {
// 'command' is the binary or script that will be called with /bin/sh.
command = "greet"
// 'args' is a list of arguments passed to the 'greet' binary.
args = [
"-c", "${NOMAD_ALLOC_DIR}/config.yml"
]
}
// 'template' instructs the Nomad Client to use 'consul-template' to
// template a given file into the allocation at a specified path. Note:
// that while 'consul-template' has 'consul' in the name, 'consul' is not
// required to use it.
// https://www.nomadproject.io/docs/job-specification/task#template
// https://www.nomadproject.io/docs/job-specification/template
template {
// 'data' is a string containing the contents of the consul template.
// Here we're passing a variable instead of defining it inline but both
// are perfectly valid.
data = var.config-yml-template
destination = "${NOMAD_ALLOC_DIR}/config.yml"
change_mode = "restart"
}
// 'env' allows us to pass environment variables to our task. Since
// consul-template is run locally inside of allocation, if we needed to
// pass a variable from our job specification we would need to pass them
// in this stanza.
// https://www.nomadproject.io/docs/job-specification/task#env
//
env {
// 'foo' is just an example and not actually used in these lessons.
foo = "${var.foo}"
}
}
}
}
In 'getting started' we got Nomad and Consul installed and reviewed each stanza of a Nomad job specification. In this workshop we're going to deploy a 'Hello World' style app, make some changes to it's configuration, and then re-deploy it.
These lessons make use of greet
, a simple web server that will respond with Hello, <name>
when you send it an HTTP GET request. Ensure that you've got it installed before continuing.
If you've got Go v1.17
installed and your $GOPATH
in you $PATH
then you should be able to go install
it like so:
$ go install github.com/letsencrypt/hashicorp-lessons/greet@latest
Ensure greet is now in our $PATH
.
$ which greet
Running the plan
subcommand will help us understand what actions the Nomad
Scheduler is going to take on our behalf. Now you're probably seeing a whole lot of changes here that were not included in our job specification. This is because, in the absence of their explicit definition, Nomad will fill in some defaults for required values.
$ nomad job plan -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
+ Job: "hello-world"
+ AllAtOnce: "false"
+ Dispatched: "false"
+ Name: "hello-world"
+ Namespace: "default"
+ Priority: "50"
+ Region: "global"
+ Stop: "false"
+ Type: "service"
+ Datacenters {
+ Datacenters: "dev-general"
}
+ Task Group: "greeter" (1 create)
+ Count: "1" (forces create)
+ RestartPolicy {
+ Attempts: "2"
+ Delay: "15000000000"
+ Interval: "1800000000000"
+ Mode: "fail"
}
+ ReschedulePolicy {
+ Attempts: "0"
+ Delay: "30000000000"
+ DelayFunction: "exponential"
+ Interval: "0"
+ MaxDelay: "3600000000000"
+ Unlimited: "true"
}
+ EphemeralDisk {
+ Migrate: "false"
+ SizeMB: "300"
+ Sticky: "false"
}
+ Update {
+ AutoPromote: "false"
+ AutoRevert: "false"
+ Canary: "0"
+ HealthCheck: "checks"
+ HealthyDeadline: "300000000000"
+ MaxParallel: "1"
+ MinHealthyTime: "10000000000"
+ ProgressDeadline: "600000000000"
}
+ Network {
Hostname: ""
+ MBits: "0"
Mode: ""
+ Static Port {
+ HostNetwork: "default"
+ Label: "http"
+ To: "0"
+ Value: "1234"
}
}
+ Service {
+ AddressMode: "auto"
+ EnableTagOverride: "false"
+ Name: "hello-world-greeter"
+ Namespace: "default"
+ OnUpdate: "require_healthy"
+ PortLabel: "http"
TaskName: ""
+ Check {
AddressMode: ""
Body: ""
Command: ""
+ Expose: "false"
+ FailuresBeforeCritical: "0"
GRPCService: ""
+ GRPCUseTLS: "false"
InitialStatus: ""
+ Interval: "3000000000"
Method: ""
+ Name: "ready-http"
+ OnUpdate: "require_healthy"
+ Path: "/"
+ PortLabel: "http"
Protocol: ""
+ SuccessBeforePassing: "0"
+ TLSSkipVerify: "false"
TaskName: ""
+ Timeout: "2000000000"
+ Type: "http"
}
+ Check {
AddressMode: ""
Body: ""
Command: ""
+ Expose: "false"
+ FailuresBeforeCritical: "0"
GRPCService: ""
+ GRPCUseTLS: "false"
InitialStatus: ""
+ Interval: "3000000000"
Method: ""
+ Name: "ready-tcp"
+ OnUpdate: "require_healthy"
Path: ""
+ PortLabel: "http"
Protocol: ""
+ SuccessBeforePassing: "0"
+ TLSSkipVerify: "false"
TaskName: ""
+ Timeout: "2000000000"
+ Type: "tcp"
}
}
+ Task: "greet" (forces create)
+ Driver: "raw_exec"
+ KillTimeout: "5000000000"
+ Leader: "false"
+ ShutdownDelay: "0"
+ Config {
+ args[0]: "-c"
+ args[1]: "${NOMAD_ALLOC_DIR}/config.yml"
+ command: "greet"
}
+ Resources {
+ CPU: "100"
+ Cores: "0"
+ DiskMB: "0"
+ IOPS: "0"
+ MemoryMB: "300"
+ MemoryMaxMB: "0"
}
+ LogConfig {
+ MaxFileSizeMB: "10"
+ MaxFiles: "10"
}
+ Template {
+ ChangeMode: "restart"
ChangeSignal: ""
+ DestPath: "${NOMAD_ALLOC_DIR}/config.yml"
+ EmbeddedTmpl: "---\nname: \"Samantha\"\nport: 1234\n\n"
+ Envvars: "false"
+ LeftDelim: "{{"
+ Perms: "0644"
+ RightDelim: "}}"
SourcePath: ""
+ Splay: "5000000000"
+ VaultGrace: "0"
}
Scheduler dry-run:
- All tasks successfully allocated.
We expect that running our job should succeed because the plan
output above stated that all of our tasks would be successfully allocated. Let's find out!
$ nomad job run -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
- Open https://localhost:1234
- You should see:
Hello, Samantha
Edit the value of name
in 1_HELLO_WORLD/vars.go
:
---
name: "YOUR NAME"
port: 1234
$ nomad job plan -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
+/- Job: "hello-world"
+/- Task Group: "greeter" (1 create/destroy update)
+/- Task: "greet" (forces create/destroy update)
+/- Template {
ChangeMode: "restart"
ChangeSignal: ""
DestPath: "${NOMAD_ALLOC_DIR}/config.yml"
+/- EmbeddedTmpl: "---\nname: \"Samantha\"\nport: 1234\n\n" => "---\nname: \"YOUR NAME\"\nport: 1234\n\n"
Envvars: "false"
LeftDelim: "{{"
Perms: "0644"
RightDelim: "}}"
SourcePath: ""
Splay: "5000000000"
VaultGrace: "0"
}
Scheduler dry-run:
- All tasks successfully allocated.
Looks like it's going to work out just fine!
$ nomad job run -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
- Open https://localhost:1234
- You should see:
Hello, YOUR NAME
It's time to scale our greeter allocations. Thankfully Nomad's dynamic port allocation and Consul's templating are going to make this operation pretty painless.
It's best if you follow the documentation here to update your job specification at 1_HELLO_WORLD/job.go
and your vars file at 1_HELLO_WORLD/vars.go
, but if you get lost you can see the final product under 2_HELLO_SCALING/job.go
and 2_HELLO_SCALING/vars.go
.
Edit job >> group "greeter" >> count
in our job specification from:
count = 1
to:
count = 2
$ nomad job plan -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
+/- Job: "hello-world"
+/- Task Group: "greeter" (1 create, 1 in-place update)
+/- Count: "1" => "2" (forces create)
Task: "server"
Scheduler dry-run:
- WARNING: Failed to place all allocations.
Task Group "greeter" (failed to place 1 allocation):
1. Resources exhausted on 1 nodes
1. Dimension "network: reserved port collision http=1234" exhausted on 1 nodes
It looks like having a static port of 1234
is going to cause resource exhaustion. Not to worry though, we can update our job specification to let the Nomad Scheduler pick a port for each of our greeter allocations to listen on.
Under job >> group "greeter" >> network >> port
we can remove our static port assignment of 1234 and leave empty curly braces {} . This will instruct the Nomad Scheduler dynamically assign the port for each allocation.
Our existing lines:
port "http" {
static = 1234
}
Our new line:
port "http" {}
By replacing 1234 in our greet config template with the NOMAD_ALLOC_PORT_http
environment variable Nomad will always keep our config file up-to-date.
We expect the environment variable to be NOMAD_ALLOC_PORT_http
because the network port we declare at job >> group "greeter" >> network >> port
is called http
. If we had called it my-special-port
we would use NOMAD_ALLOC_PORT_my-special-port
.
Our existing line:
port: 1234
Our new line:
port: {{ env "NOMAD_ALLOC_PORT_http" }}
For more info on Nomad Runtime Environment Variables see these docs.
$ nomad job plan -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
+/- Job: "hello-world"
+/- Task Group: "greeter" (1 create, 1 ignore)
+/- Count: "1" => "2" (forces create)
+ Network {
Hostname: ""
+ MBits: "0"
Mode: ""
+ Dynamic Port {
+ HostNetwork: "default"
+ Label: "http"
+ To: "0"
}
}
- Network {
Hostname: ""
- MBits: "0"
Mode: ""
- Static Port {
- HostNetwork: "default"
- Label: "http"
- To: "0"
- Value: "1234"
}
}
+/- Task: "greet" (forces create/destroy update)
+/- Template {
ChangeMode: "restart"
ChangeSignal: ""
DestPath: "${NOMAD_ALLOC_DIR}/config.yml"
+/- EmbeddedTmpl: "---\nname: \"Samantha\"\nport: 1234\n\n" => "---\nname: \"Samantha\"\nport: {{ env \"NOMAD_ALLOC_PORT_http\" }}\n\n"
Envvars: "false"
LeftDelim: "{{"
Perms: "0644"
RightDelim: "}}"
SourcePath: ""
Splay: "5000000000"
VaultGrace: "0"
}
Scheduler dry-run:
- All tasks successfully allocated.
Okay, this looks as though it will work!
$ nomad job run -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
There are a few ways that we can fetch the ports that Nomad assigned to our greeter allocations.
- Open: https://localhost:4646/ui/jobs/hello-world/web
- Scroll down to the Allocations table
- Open each of the Allocations where Status is running
- Scroll down to the Ports table, and note the value for http in the Host Address column
- Run
nomad job status hello-world
and note the ID for each allocation with running in the Status column:$ nomad job status hello-world ID = hello-world Name = hello-world Submit Date = 2022-01-06T16:57:57-08:00 Type = service Priority = 50 Datacenters = dev-general Namespace = default Status = running Periodic = false Parameterized = false Summary Task Group Queued Starting Running Failed Complete Lost greeter 0 0 2 0 1 0 Latest Deployment ID = a11c023a Status = successful Description = Deployment completed successfully Deployed Task Group Desired Placed Healthy Unhealthy Progress Deadline greeter 2 2 2 0 2022-01-06T17:08:24-08:00 Allocations ID Node ID Task Group Version Desired Status Created Modified 4ed1c285 e6e7b140 greeter 1 run running 17s ago 4s ago ef0ef9b3 e6e7b140 greeter 1 run running 31s ago 18s ago aa3a7834 e6e7b140 greeter 0 stop complete 14m9s ago 16s ago
- Run
nomad alloc status <allocation-id>
for each alloc ID:$ nomad alloc status 4ed1c285 ID = 4ed1c285-e923-d627-7cc2-d392147eca2f Eval ID = e6b817a5 Name = hello-world.greeter[0] Node ID = e6e7b140 Node Name = treepie.local Job ID = hello-world Job Version = 1 Client Status = running Client Description = Tasks are running Desired Status = run Desired Description = <none> Created = 58s ago Modified = 45s ago Deployment ID = a11c023a Deployment Health = healthy Allocation Addresses Label Dynamic Address *http yes 127.0.0.1:31623 Task "greet" is "running" Task Resources CPU Memory Disk Addresses 0/100 MHz 49 MiB/300 MiB 300 MiB Task Events: Started At = 2022-01-07T00:58:12Z Finished At = N/A Total Restarts = 0 Last Restart = N/A Recent Events: Time Type Description 2022-01-06T16:58:12-08:00 Started Task started by client 2022-01-06T16:58:12-08:00 Task Setup Building Task Directory 2022-01-06T16:58:12-08:00 Received Task received by client
- Under Allocation Addresses we can see
127.0.0.1:31623
is the address for this allocation
In our job specification you'll see that we also registered our greeter allocations with the Consul Catalog as a Service called hello-world-greeter. This means that we can also grab these addresses and ports via the Consul web UI:
- Open https://localhost:8500/ui/dev-general/services/hello-world-greeter/instances
- On the right-hand side of each entry you can find the complete IP address and port for each of our hello-world-greeter allocations.
But, how would a service be able to locate these hello-world-greeter allocations? Well sure, you could integrate a Consul Client into these other services that want to connect with a hello-world-greeter, but there's something a little simpler that you can do as a first approach, use the DNS endpoint that Consul exposes by default to fetch theses addresses and ports in the form of a SRV
record.
$ dig @127.0.0.1 -p 8600 hello-world-greeter.service.dev-general.consul. SRV
; <<>> DiG 9.10.6 <<>> @127.0.0.1 -p 8600 hello-world-greeter.service.dev-general.consul. SRV
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 11398
;; flags: qr aa rd; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 5
;; WARNING: recursion requested but not available
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;hello-world-greeter.service.dev-general.consul. IN SRV
;; ANSWER SECTION:
hello-world-greeter.service.dev-general.consul. 0 IN SRV 1 1 28098 7f000001.addr.dev-general.consul.
hello-world-greeter.service.dev-general.consul. 0 IN SRV 1 1 31623 7f000001.addr.dev-general.consul.
;; ADDITIONAL SECTION:
7f000001.addr.dev-general.consul. 0 IN A 127.0.0.1
treepie.local.node.dev-general.consul. 0 IN TXT "consul-network-segment="
7f000001.addr.dev-general.consul. 0 IN A 127.0.0.1
treepie.local.node.dev-general.consul. 0 IN TXT "consul-network-segment="
;; Query time: 0 msec
;; SERVER: 127.0.0.1#8600(127.0.0.1)
;; WHEN: Thu Jan 06 17:01:41 PST 2022
;; MSG SIZE rcvd: 302
Given the output of this SRV
record you should be able to browse to https://localhost:28098 or https://localhost:31623 and be greeted.
If you follow these docs you should also be able add Consul to your list of resolvers.
Assuming Consul is set as one of my resolvers I should also be able to browse to either of the following:
- https://hello-world-greeter.service.dev-general.consul:28098
- https://hello-world-greeter.service.dev-general.consul:31623
Re-deploying hello-world every time we want to change the name we're saying hello to seems a little heavy handed when we really just need to update our greet config file template and restart our greet task. So, how can we accomplish this without another deployment? Consul to the rescue!
It's best if you follow the documentation here to update your job specification at 1_HELLO_WORLD/job.go
and your vars file at 1_HELLO_WORLD/vars.go
, but if you get lost you can see the final product under 3_HELLO_CONSUL/job.go
and 3_HELLO_CONSUL/vars.go
.
Nomad ships with a tool called consul-template
that we've actually already been making good use of. For example, the template stanza of our greet uses consul-template
to template our config.yml file.
template {
data = var.config-yml-template
destination = "${NOMAD_ALLOC_DIR}/config.yml"
change_mode = "restart"
}
We can instruct consul-template
to retrieve the name of the person we're saying hello to from the Consul K/V store while deploying our greeter allocations. After an initial deploy, Nomad will then watch the Consul K/V path for changes. If a change is detected, Nomad will re-run consul-template
with the updated value and then take the action specified by the change_mode
attribute of our template
stanza. In our case, it will restart
the greet task.
Our template var in 1_HELLO_WORLD/vars.go
is currently:
config-yml-template = <<-EOF
---
name: "YOUR NAME"
port: {{ env "NOMAD_ALLOC_PORT_http" }}
EOF
We should edit it like so:
config-yml-template = <<-EOF
{{ with $v := key "hello-world/config" | parseYAML }}
---
name: "{{ $v.name }}"
port: {{ env "NOMAD_ALLOC_PORT_http" }}
{{ end }}
EOF
Here we're setting a variable v
with the parsed contents of the YAML stored at the Consul K/V path of hello-world/config
. We're then templating the value of the name
key.
Note: make sure you leave an empty newline at the end of your vars file otherwise the Nomad CLI won't be able to parse it properly.
We could do this with the Consul web UI but using the consul
CLI is much
faster.
$ consul kv put 'hello-world/config' 'name: "Samantha"'
Success! Data written to: hello-world/config
$ consul kv get 'hello-world/config'
name: "Samantha"
Here we've pushed a name
key with a value of "Samantha"
to the
hello-world/config
Consul K/V. We have also fetched it just to be sure.
$ nomad job plan -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
+/- Job: "hello-world"
+/- Task Group: "greeter" (1 create/destroy update, 1 ignore)
+/- Task: "greet" (forces create/destroy update)
+/- Template {
ChangeMode: "restart"
ChangeSignal: ""
DestPath: "${NOMAD_ALLOC_DIR}/config.yml"
+/- EmbeddedTmpl: "---\nname: \"Samantha\"\nport: {{ env \"NOMAD_ALLOC_PORT_http\" }}\n\n" => "{{ with $v := key \"hello-world/config\" | parseYAML }}\n---\nname: \"{{ $v.name }}\"\nport: {{ env \"NOMAD_ALLOC_PORT_http\" }}\n{{ end }}\n \n"
Envvars: "false"
LeftDelim: "{{"
Perms: "0644"
RightDelim: "}}"
SourcePath: ""
Splay: "5000000000"
VaultGrace: "0"
}
Scheduler dry-run:
- All tasks successfully allocated.
Alright this looks like it should work.
$ nomad job run -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
$ dig @127.0.0.1 -p 8600 hello-world-greeter.service.dev-general.consul. SRV | grep hello-world-greeter.service
; <<>> DiG 9.10.6 <<>> @127.0.0.1 -p 8600 hello-world-greeter.service.dev-general.consul. SRV
;hello-world-greeter.service.dev-general.consul. IN SRV
hello-world-greeter.service.dev-general.consul. 0 IN SRV 1 1 30226 7f000001.addr.dev-general.consul.
hello-world-greeter.service.dev-general.consul. 0 IN SRV 1 1 28843 7f000001.addr.dev-general.consul.
You should be able to browse to https://localhost:30226 or https://localhost:28843 and be greeted.
$ consul kv put 'hello-world/config' 'name: "SAMANTHA"'
Success! Data written to: hello-world/config
$ consul kv get 'hello-world/config'
name: "SAMANTHA"
If you reload https://localhost:30226 or https://localhost:28843 you should be greeted by your updated name. This did not require a deployment; Nomad was notified that the value at the Consul K/V path of hello-world/config
had been updated. Nomad re-templated our greet config file and then restarted our greet task just like we asked (in the template
stanza).
Note: you may have observed a pause of about 5 seconds between when the greet task being stopped and when it was started again. This is the default wait time between stop and start operations and it's entirely configurable on a per group or task basis.
It's time to scale our hello-world job again, but this time we're going to do so with the help of a load balancer called Traefik. Traefik is an open-source edge router written in Go with first-party Consul integration. Please ensure that you've got version 2.5.x installed and in your path.
I was able to fetch the binary via Homebrew on MacOS but you can always fetchthe latest binary for your platform from theirreleases page.
Out Traefik config is a minimal TOML file with some consul-template syntax.
traefik-config-template = <<-EOF
[entryPoints.http]
address = ":{{ env "NOMAD_ALLOC_PORT_http" }}"
[entryPoints.traefik]
address = ":{{ env "NOMAD_ALLOC_PORT_dashboard" }}"
[api]
dashboard = true
insecure = true
[providers.consulCatalog]
prefix = "hello-world-lb"
exposedByDefault = false
[providers.consulCatalog.endpoint]
address = "{{ env "CONSUL_HTTP_ADDR" }}"
scheme = "http"
EOF
- Our first two declarations are HTTP
entryPoints
which are similar tohttp { server {
in NGINX parlance. The only attribute we need need to template is the<hostname>:<port>
. The first is for our greeter load-balancer and the second is for the Traefik dashboard (not required). For both of these we can rely on the Nomad environment variables for two new ports we're going to add to our job specification, these will be calledhttp
anddashboard
. Again, we prefix these withNOMAD_ALLOC_PORT_
and Nomad will do the rest for us. - The next declaration is
api
. Here we're just going to enable thedashboard
and disabletls
. - The final declarations enable and configure the
consulCatalog
provider. There are two attributes in the first declaration.prefix
configures the provider to exclusively query for Consul catalog hosts tagged withprefix:hello-world-lb
.exposedByDefault
(false) configures the provider to query only Consul services tagged withtraefik.enable=true
. The last declaration instructs the provider on how to connect to Consul. Because Nomad and Consul are already tightly integrated we can templateaddress
with theCONSUL_HTTP_ADDR
env var. As forscheme
, since we're using Consul indev
mode this ishttp
. - Ensure that you add a newline at the end of this file otherwise Nomad will be unable to parse it.
Near the top, just below our existing config-yml-template
variable declaration add the following:
variable "traefik-config-template" {
type = string
}
Our Traefik load-balancer will route requests on port 8080
to any healthy greeter allocation. Traefik will also expose a dashboard on port 8081
. We've added static ports for both the load-balancer (http
) and the dashboard under the network
stanza. We've also added some TCP and HTTP readiness checks that reference these ports in our new hello-world-lb Consul service.
group "load-balancer" {
count = 1
network {
port "http" {
static = 8080
}
port "dashboard" {
static = 8081
}
}
service {
name = "hello-world-lb"
port = "http"
check {
name = "ready-tcp"
type = "tcp"
port = "http"
interval = "3s"
timeout = "2s"
}
check {
name = "ready-http"
type = "http"
port = "http"
path = "/"
interval = "3s"
timeout = "2s"
}
check {
name = "ready-tcp"
type = "tcp"
port = "dashboard"
interval = "3s"
timeout = "2s"
}
check {
name = "ready-http"
type = "http"
port = "dashboard"
path = "/"
interval = "3s"
timeout = "2s"
}
}
task "traefik" {
driver = "raw_exec"
config {
command = "traefik"
args = [
"--configFile=${NOMAD_ALLOC_DIR}/traefik.toml",
]
}
template {
data = var.traefik-config-template
destination = "${NOMAD_ALLOC_DIR}/traefik.toml"
change_mode = "restart"
}
}
}
Under the greeter group you should see the service
stanza. Adjust yours to include the tags from the Traefik config.
service {
name = "hello-world-greeter"
port = "http"
tags = [
"hello-world-lb.enable=true",
"hello-world-lb.http.routers.http.rule=Path(`/`)",
]
$ nomad job plan -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
+/- Job: "hello-world"
+/- Task Group: "greeter" (2 in-place update)
+/- Service {
AddressMode: "auto"
EnableTagOverride: "false"
Name: "hello-world-greeter"
Namespace: "default"
OnUpdate: "require_healthy"
PortLabel: "http"
TaskName: ""
+ Tags {
+ Tags: "hello-world-lb.enable=true"
+ Tags: "hello-world-lb.http.routers.http.rule=Path(`/`)"
}
}
Task: "greet"
+ Task Group: "load-balancer" (1 create)
+ Count: "1" (forces create)
+ RestartPolicy {
+ Attempts: "2"
+ Delay: "15000000000"
+ Interval: "1800000000000"
+ Mode: "fail"
}
+ ReschedulePolicy {
+ Attempts: "0"
+ Delay: "30000000000"
+ DelayFunction: "exponential"
+ Interval: "0"
+ MaxDelay: "3600000000000"
+ Unlimited: "true"
}
+ EphemeralDisk {
+ Migrate: "false"
+ SizeMB: "300"
+ Sticky: "false"
}
+ Update {
+ AutoPromote: "false"
+ AutoRevert: "false"
+ Canary: "0"
+ HealthCheck: "checks"
+ HealthyDeadline: "300000000000"
+ MaxParallel: "1"
+ MinHealthyTime: "10000000000"
+ ProgressDeadline: "600000000000"
}
+ Network {
Hostname: ""
+ MBits: "0"
Mode: ""
+ Static Port {
+ HostNetwork: "default"
+ Label: "dashboard"
+ To: "0"
+ Value: "8081"
}
+ Static Port {
+ HostNetwork: "default"
+ Label: "http"
+ To: "0"
+ Value: "8080"
}
}
+ Service {
+ AddressMode: "auto"
+ EnableTagOverride: "false"
+ Name: "hello-world-lb"
+ Namespace: "default"
+ OnUpdate: "require_healthy"
+ PortLabel: "http"
TaskName: ""
+ Check {
AddressMode: ""
Body: ""
Command: ""
+ Expose: "false"
+ FailuresBeforeCritical: "0"
GRPCService: ""
+ GRPCUseTLS: "false"
InitialStatus: ""
+ Interval: "3000000000"
Method: ""
+ Name: "ready-http"
+ OnUpdate: "require_healthy"
+ Path: "/"
+ PortLabel: "dashboard"
Protocol: ""
+ SuccessBeforePassing: "0"
+ TLSSkipVerify: "false"
TaskName: ""
+ Timeout: "2000000000"
+ Type: "http"
}
+ Check {
AddressMode: ""
Body: ""
Command: ""
+ Expose: "false"
+ FailuresBeforeCritical: "0"
GRPCService: ""
+ GRPCUseTLS: "false"
InitialStatus: ""
+ Interval: "3000000000"
Method: ""
+ Name: "ready-tcp"
+ OnUpdate: "require_healthy"
Path: ""
+ PortLabel: "dashboard"
Protocol: ""
+ SuccessBeforePassing: "0"
+ TLSSkipVerify: "false"
TaskName: ""
+ Timeout: "2000000000"
+ Type: "tcp"
}
}
+ Task: "traefik" (forces create)
+ Driver: "raw_exec"
+ KillTimeout: "5000000000"
+ Leader: "false"
+ ShutdownDelay: "0"
+ Config {
+ args[0]: "--configFile=${NOMAD_ALLOC_DIR}/traefik.toml"
+ command: "traefik"
}
+ Resources {
+ CPU: "100"
+ Cores: "0"
+ DiskMB: "0"
+ IOPS: "0"
+ MemoryMB: "300"
+ MemoryMaxMB: "0"
}
+ LogConfig {
+ MaxFileSizeMB: "10"
+ MaxFiles: "10"
}
+ Template {
+ ChangeMode: "restart"
ChangeSignal: ""
+ DestPath: "${NOMAD_ALLOC_DIR}/traefik.toml"
+ EmbeddedTmpl: "[entryPoints.http]\naddress = \":{{ env \"NOMAD_ALLOC_PORT_http\" }}\"\n \n[entryPoints.traefik]\naddress = \":{{ env \"NOMAD_ALLOC_PORT_dashboard\" }}\"\n \n[api]\ndashboard = true\ninsecure = true\n \n[providers.consulCatalog]\nprefix = \"hello-world-lb\"\nexposedByDefault = false\n \n[providers.consulCatalog.endpoint]\naddress = \"{{ env \"CONSUL_HTTP_ADDR\" }}\"\nscheme = \"http\"\n"
+ Envvars: "false"
+ LeftDelim: "{{"
+ Perms: "0644"
+ RightDelim: "}}"
SourcePath: ""
+ Splay: "5000000000"
+ VaultGrace: "0"
}
Scheduler dry-run:
- All tasks successfully allocated.
Alright this looks like it should work.
$ nomad job run -verbose -var-file=./1_HELLO_WORLD/vars.go ./1_HELLO_WORLD/job.go
- Open https://localhost:8080 and ensure that you're being greeted
- Open https://localhost:8081 and ensure that it loads succesfully
- Open: https://localhost:8081/dashboard/#/http/services/hello-world-greeter@consulcatalog
- You should find your 2 existing greeter allocations listed by their full address
<hostname>:<port>
.
It's time to scale our greeter allocations again, except this time we have a load-balancer that will reconfigure itself when the count is increased.
- You can scale allocations via the job specification but you can also temporarily scale a given
job >> group
via the nomad CLI:$ nomad job scale "hello-world" "greeter" 3
- Refresh: https://localhost:8081/dashboard/#/http/services/hello-world-greeter@consulcatalog
- You should see 3 greeter allocations
- You can also temporarily de-scale a given
job >> group
via the nomad CLI:$ nomad job scale "hello-world" "greeter" 2
- Refresh: https://localhost:8081/dashboard/#/http/services/hello-world-greeter@consulcatalog
- You should see 2 greeter allocations like before