[ESP32 ETH] Check for Eth settings is too strict for pwr pin #4724
Labels
Comments
tonhuisman
added a commit
to tonhuisman/ESPEasy-1
that referenced
this issue
Jul 6, 2023
TD-er
added a commit
that referenced
this issue
Jul 7, 2023
…-unset [ETH] Allow Ethernet Power GPIO pin unset (#4724)
erstec
pushed a commit
to ly1bwb/ESPEasy
that referenced
this issue
Aug 23, 2023
Release mega-20230822
Changes in mega-20230822 (since mega-20230623):
TD-er (103):
[Eastron] Fix merge issues
[Eastron] Uncrustify + remove 500 bytes of duplicate strings
[Eastron] Fix merge issues
[Cleanup] Reduce bin size by stripping unused code
[Cleanup] Reduce bin size by deduplicate factory reset code
[Factory Reset] Fix keeping settings (letscontrolit#4263)
[RFcal] Fix typo in command "clearwifirfcal"
[SendToHTTP] Only include "Authorization" header when credentials set
[ESP32 2.0.5.x] Fix crashes calling noInterrupt() in ISR callback
[Adafruit NeoPixel] Update lib to fix noInterrupts
[Quad Enc] Fix ESP32 noInterrupts()
[Build] Fix merge issues, missing #endif
[ESP32-solo1] Add support for single-core ESP32
[Web flasher] Split "4M collections builds" in a separate group
[release build] Copy ESP32solo1 binaries during release
[Crash Analysis] Show controller/plugin name on crash at system event
[Build] Fix merge issue with duplicate PlatformIO envs
[Build] Fix missing #ifdef check
[Devices] Fix showing all included plugins in devices pull-down list
[Cleanup] Move plugin function pointer array to PROGMEM
[Cleanup] Simplify weblog buffer
[Cleanup] Fix build error due to missing defines
[Cleanup] Improve web serve speed + value formatting speed
[Cleanup] Reduce resouces used on Dallas, Sysinfo and Dummy tasks
[Build] Fix missing #ifdef check
[Cleanup] Reduce CPU usage only calculate valuecount once
[ESPEasy p2p] Remove delay() calls from p2p messaging
[Cleanup] Remove unused PLUGIN_EVENT_OUT
[Cleanup] Get timing stats for controller function calls
[cleanup] Simplify parse controller variables
[P2P] unit with latest build not receiving values of shared plugins (letscontrolit#4718)
[P2P] Check for unset DeviceNumber in matchesSensorType
[Cleanup] Speedup frequent calls + reduce build size
[Cleanup] Reduce calls to saveToRTC()
[Cleanup] Simplify mustConsiderAsJSONString()
[Cleanup] Remove long webserver debug log
[Cleanup] Reduce backgroundtasks() frequency
[Cleanup] Reduce mem allocs for ADC logs
[HLW8012] Improve stability and accuracy
[Cleanup] Allow a task to set initial PLUGIN_READ on init
[Cleanup] Reduce memory usage when timingstats is disabled (or read)
[PlatformIO] Force PIO to 6.1.7
[HLW8012] Fix instability due to IRAM
[Build] Move "hard_" builds to ESP8266 SDK 3.1.2
[Cleanup] Reduce items being logged in TimingStats
[Build] Revert switching 'hard_' builds to ESP8266 SDK 2.7.x
[HLW8012] Remove IIR filter from interrupt callback function
[PlatformIO] Test build with PIO 6.1.9rc1
[PlatformIO] Test build PIO 6.1.9rc1 (2nd attempt)
[PIO] Set minimal PIO version to 6.1.9
[Cleanup] Simplify allocation of ControllerSettings allocation, memleak?
[PVS Studio] Fix issues found by PVS Studio
[PVS Studio] Fix build error & unsafe macro
[PVS Studio] Fix some issues found by PVS Studio
[Cleanup] Attempt to fix memory leak in PluginTaskData
[ArduinoJSON] Update to ArduinoJson 6.21.2
[Cleanup] Simplify PluginStats::getSample
[PVS Studio] Fix some issues reported by PVS Studio
[MDNS] Disable MDNS for ESP8266 due to memory leak
[CSE7766] Improve reliability + fix issue with console port selection
[CSE7766] Fix parsing packets with lost bytes
[CSE7766] Add output selection of units of measure
[WiFi] Fix ESP8266 instability compiler optimization flag -O2
[mDNS] Call MDNS.announce() every second on ESP8266 (mem leak?)
[Cleanup] Add strformat function to simplify log line creation
[Build] Fix build errors incorrect use of strformat()
[Cleanup] Move duplicate oversampling code to helper class
[ESP32 Serial] Fix serial tasks not working after save or restart task
[ESP32 Serial] Do not cache baud rate between end() and begin()
[Cleanup] Replace oversampling code duplication P145
[Cleanup] Replace oversampling code duplication P060
[Cleanup] Replace oversampling code duplication P067
[CSE7766] Update task value with intermediate oversampling value
[Oversampling] Add reset + weighted keep last
[ESP32 Serial] Fix serial tasks not working after save or restart task
[Eastron] Update SDM library to v2.2.2
[Eastron] Re-apply ESPEasy specific changes to SDM library
[Eastron] Generate all SDM register strings
[Eastron] Cleanup showing default taskvalue names + SDM72_V2add
[Eastron] Cleanup code duplicates & uncrustify
[Eastron] Fix compiler warnings
[Eastron] Add support for SDM320C
[Eastron] Split 'readVal' function to allow async reads
[Eastron] Add "demand" in register description
[Eastron] Implement complete async read of Eastron registers
[Eastron] Add hardware RTS support for ESP32 (for ~RE/DE pin on RS485)
[Eastron] Fix ESP32 hardware RTS flow control
[Eastron] improve speed & add commands to set modbusID & baudrate
[Eastron] Start documentation
[Eastron] Document RS485 specific wiring
[Eastron] Complete documentation on Eastron plugin
[Eastron] Add support for RS485 collision detection on ESP32
[Serial Console] Fix HW Serial0 unusable on ESP8266 limited builds
[Eastron] Add delay on first PLUGIN_READ to allow reading registers
[Build] Set ESP8266 Energy build to LIMIT_BUILD_SIZE
[Build] Change LIMIT_BUILD_SIZE on ESP8266 Energy to BUILD_NO_DEBUG
[Eastron] Improve read stability on ESP8266
[CSE7766] Fix crash when not all stats are enabled
[Settings] Fix setting task var names & load default names
[Settings] Fix task value names not being updated on ESP32 (cache)
[Settings] Fix setting custom task value name on Eastron task
[ADS1115] Retry on error reads within timeout
automatically updated release notes for mega-20230822
Ton Huisman (68):
[Release][Bugfix] Script should deploy an archive per CPU Architecture
[Docs] Describe `Wrk` and `Wkd` indicators for `Clock#Time` event
[P153] Remove unused #include
[Build] Add support for ESP32-S3 8MB units
[Build] Rearrange 8M2M to 8M1M configuration
[P118] Fix compilation when suppressing only DEBUG logging
[Build] Check all ESP32 builds correctly for factory.bin filesize
[Docs] Fix typo on Plugin page
[Build] Add `boards` definitions for ESP32-S3 8MB and ESP32-S3 16MB
[ETH] Allow Ethernet Power GPIO pin unset (letscontrolit#4724)
[P014] Set default output values to Temp/Hum
[P118] Fix compilation when included in Custom builds
[Build] Update board_name for custom_ESP32_4M2M_NO_OTA_LittleFS
[Build] Add missing #undef FEATURE_TIMING_STATS
[Rules] Add minHexDigits to toHex function
[Docs] Improvements and various fixes
[Build] Add some missing defines to MAX build to make them explicitly available
[P128] Revert changes after library update (not working with ESP8266)
[UI] Add option for disabling Rules auto-completion
[P035] Add Inverted output option, as supported by the IRsend library
[P035] Code improvements
[P035] Add documentation
[P009] Small documentation typo
[P014] Fix invalid cast
[Build] Move ESP32_4M2M settings to own board file
[Build] Remove unused board definition files
[P118] Allow enable/disable of ORCON feature via Custom.h
[P141] Allow enable/disable of Cursor X/Y values feature via Custom.h
[Console] Add newline after console command to avoid mixing in with logging
[P046] Fix documentation, address some code issues, WiP
[P046] Fix compilation issue and include in MAX build
[Build] Include IR plugins in MAX builds
[P035] Small size reductions, remove some unused commented code
[Build] Enable I2C device scan for ESP32 builds
[P098] Add documentation
[EasyColorCode] Fix typo `7ddt` (was 7dtt)
[EasyColorCode] Add some missing commands
[P013] Move to category Distance (from position), add missing [P134] to Distance too
[Controllers] Fix `validCPluginID` check (initialization and actual check)
[P098] Add precaution to documentation for PWM usage
[Build] Reduce ENERGY build size by removing DEBUG logging
[Build] Fix compiler warnings
[EasyColorCode] Fix some auto-complete issues and typos
[EasyColorCode] Add few missing commands for P036
[Lib] Update NeoPixelBus to current latest
[P128] Use customized NeoPixelBus library, upgrading to latest features won't properly work
[P113] Fix for shifted I2C address in library, code improvements
[P113] Apply the fix at the original crime-scene ;-)
[Libs] Update VL53L1X library to current latest v1.2.12 (with fix)
[P113] Disable I2C address selection as that seems to mess up the sensor
[P113] Update documentation
[P122] Uncrustify and move initialization from constructor to .h file
[P153] Remove unused variable
[P020] Sourcecode formatting for clarification
[Docs] Correct some layout issues, causing parts of documentation to disappear
[P113] Add a few extra nullptr checks
[Core] Fix some string/message inconsistencies
[P113] Add a few extra nullptr checks
[Converters] Add toStringNoZero() function
[Generic] Improvements and fixes part 2, Aug 2023
[P113] Fix typo in log statement
[AdaGFX] Additional error information for unsupported bmp files, improve docs
[UI] Widen `textarea` fields for easier input of larger/wider text
[Docs] P002 / P047 Add YT link for selecting a proper (analog) Soil-moisture sensor
[Converters] Use the correct conversion
[Tools] Remove ESP Easy Flasher, update Espressif Download tool
[Tools] Revert esptool to last version
[Tools] Add `blank_8MB.bin` for erasing 8MB units, exclude from ESP8266 archive
tomcatxx (3):
Update SDM.h
Update _P078_Eastron.ino
Update SDM.h
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
See forum issue
PWR pin for Ethernet can also be -1 for "unset", but this is not accepted as valid setting.
The text was updated successfully, but these errors were encountered: