[Keyboard] Add Iron180 V2 PCB support (qmk#22314)

Co-authored-by: Joel Challis <[email protected]>
Co-authored-by: Duncan Sutherland <[email protected]>

keyboards/smithrune/iron180/info.json

@@ -1,5 +1,5 @@
 {
- "keyboard_name": "Iron180",
+ "keyboard_name": "Iron180 V1",
  "manufacturer": "SmithRune",
  "url": "",
  "maintainer": "Gondolindrim",

keyboards/smithrune/iron180v2/readme.md

@@ -0,0 +1,27 @@
+# Iron180 V2 PCBs QMK firmware folder
+
+## Introduction
+
+This is the QMK Firmware repository for the Iron180 PCB, a keyboard designed by [Smith and Rune](https://smithrune.com/) and PCB designed by [Gondolindrim](https://github.com/Gondolindrim).
+
+The Iron180 PCB PCB had two versions. The first version used an STM32F072 microcontroller, and was available only in solderable version; it also supports ALPS switches, in-switch single-color LEDs and a multi-layout design for default or 7U bottom row, ISO layout, split backspace and right shift.
+
+The second version used an STM32F401 microcontroller and was available in hotswap and solderable version. The solderable version removes in-switch LED support and ALPS support, but keeps all layout compatibilities of the first version. The hotswap incarnation removes ISO layout support.
+
+As of November 2020, the only way to obtain an Iron180 was through the [Group Buy](https://geekhack.org/index.php?topic=109513) which is already over and all spots were filled. There was a sale for the V2 PCBs in october, 2023.
+
+## How to compile
+
+After setting up your build environment, you can compile the Iron180 default keymap by using:
+
+ make smithrune/iron180v2/<version>/default
+
+Where `<version>` can be `v2s` or `v2h`.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## How to enter into bootloader DFU
+Enter the bootloader DFU mode in 3 ways:
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape in the default keymap) and plug in the keyboard
+* **Physical reset button**: press and hold the reset button on the back of the PCB for five seconds
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` (Escape key on layer 1 in the default keymap)

keyboards/smithrune/iron180v2/v2h/config.h

@@ -0,0 +1,26 @@
+/*
+Copyright 2023 Gondolindrim <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <https://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define WEAR_LEVELING_LOGICAL_SIZE 2048
+#define WEAR_LEVELING_BACKING_SIZE 4096

keyboards/smithrune/iron180v2/v2h/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/*
+Copyright 2023 Gondolindrim <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <https://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_F13 , KC_PSCR, KC_SCRL, KC_PAUS,
+ KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_INS , KC_HOME, KC_PGUP,
+ KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END , KC_PGDN,
+ KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT ,
+ KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1) , KC_UP ,
+ KC_LCTL, KC_LWIN, KC_LALT, KC_SPC , KC_RALT, KC_RWIN, MO(1) , KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ [1] = LAYOUT_all(
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};

keyboards/smithrune/iron180v2/v2h/keymaps/via/keymap.c

@@ -0,0 +1,37 @@
+/*
+Copyright 2023 Gondolindrim <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <https://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_F13 , KC_PSCR, KC_SCRL, KC_PAUS,
+ KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_BSPC, KC_INS , KC_HOME, KC_PGUP,
+ KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END , KC_PGDN,
+ KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT ,
+ KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1) , KC_UP ,
+ KC_LCTL, KC_LWIN, KC_LALT, KC_SPC , KC_RALT, KC_RWIN, MO(1) , KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ [1] = LAYOUT_all(
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};

keyboards/smithrune/iron180v2/v2h/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/smithrune/iron180v2/v2h/matrix_diagram.md

@@ -0,0 +1,24 @@
+# Matrix Diagram for SmithRune Iron180 V2 H
+
+```
+┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐┌───┬───┬───┐
+│00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0A │0B │0C ││0D ││0G │0F │0E │
+└───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘└───┴───┴───┘
+┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐┌───┬───┬───┐ ┌───────┐
+│10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1E ││1F │1G │3G │ │1D │ 2u Backspace
+├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤├───┼───┼───┤ └───────┘
+│20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2D ││2E │2F │2G │ 
+├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤└───┴───┴───┘ 
+│30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3D │ 
+├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ 
+│40 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │4C │4D │ │4F │
+├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤┌───┼───┼───┐
+│50 │51 │52 │56 │59 │5A │5B │5C ││5E │5F │5G │
+└────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
+ ┌──────────┐
+ 2.75u RShift │4C │
+ └──────────┘
+┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐
+│50 │51 │52 │56 │5A │5B │5C │ Tsangan/WKL
+└─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+```

keyboards/smithrune/iron180v2/v2h/rules.mk

@@ -0,0 +1 @@
+# This file intentionally left blank

keyboards/smithrune/iron180v2/v2s/config.h

@@ -0,0 +1,46 @@
+/*
+Copyright 2023 Gondolindrim <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <https://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define BACKLIGHT_PWM_DRIVER PWMD3
+#define BACKLIGHT_PWM_CHANNEL 3
+#define BACKLIGHT_PAL_MODE 2
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define WEAR_LEVELING_LOGICAL_SIZE 2048
+#define WEAR_LEVELING_BACKING_SIZE 4096
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT

keyboards/smithrune/iron180v2/v2s/halconf.h

@@ -0,0 +1,26 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ * `qmk chibios-confmigrate -i keyboards/iron180/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>