-
Notifications
You must be signed in to change notification settings - Fork 2
langroodi/LINBus
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
Overview ======== The lpuart_polling Example project is to demonstrate usage of the KSDK lpuart driver. In the example, you can send characters to the console back and they will be printed out onto console instantly. Toolchain supported =================== - GCC RISC-V Embedded 7.1.1 - RISC-V Eclipse IDE 4.7.2 Hardware requirements ===================== - Mini/Micro USB cable - RV32M1-VEGA board - Personal Computer Board settings ============== No special is needed. Prepare the Demo ================ 1. Connect a mini USB cable between the PC host and the OpenSDA USB port on the board. 2. Open a serial terminal on PC for OpenSDA serial device with these settings: - 115200 baud rate - 8 data bits - No parity - One stop bit - No flow control 3. Download the program to the target board. 4. Reset the SoC and run the project. Running the demo ================ When the demo runs successfully, the log would be seen on the OpenSDA terminal like: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lpuart polling example Board will send back received characters ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Customization options =====================
About
LIN Bus Communication using NXP TJA1021 transceivers over a RISC-V Board
Resources
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published