Remove model memory info, separate project

hk310-info.md

@@ -296,51 +296,4 @@ HK310 and X-3S.
 
 
 
-Model data EEPROM contents
------
-The transmitter always reads and writes a single byte.
- - I.e. even for sequential bytes it transmits the address for each byte
- - It polls for ACK after writing a byte
- - After writing, the clock line stays low! After reading, it stays high (bug?)
-
-350us for reading a byte (= 4 words transfer, each 9 bits, plus 2x start/stop)
-~7.5 us per clock
-
-
-On startup, the transmitter reads (each read byte is a single I2C operation!):
-Read location 0x001: 0x77 expected, HK310 and X3S have the same contents
-Read location 0x002: 0x77 expected
-Read location 0x003: 0x65 expected
-Read location 0x004: 0x6e expected
-Read location 0x001: 0x77 expected
-
-Read location 0x020: 0x02, HK310 and X3S differ on the first 4 bytes!
-Read location 0x021: 0x1c
-Read location 0x022: 0x01
-Read location 0x023: 0xc7
-Read location 0x024: 0xff
-
-Read location 0x6c: 0x00 (last 2 bytes of the first model!)
-Read location 0x6d: 0x2e
-
-Read location 0x13: last active model number
-
-Read last model data depending on value in 0x13. 58 bytes (offset between models is 60 bytes)
-
-First models starts at address 0x32
-Each model is 60 bytes long (only 58 used? Last seem to be "0x00 0x2e")
-
-Model data structure:
- 0 - 5 Model name, ``\0``-terminated
- 6 -11 Endpoints ST, TH, CH3
- 12, 13 2x DR values in %
- 13, 14 Subtrim ST, TH; -100 subtrim is EE value 0, 0 is value 100, +100 is value 200
- Others to be discovered...
-
-A fields in the model data structure that belong to a certain category 
-(e.g. endpoints) are written when the menu is exited, when any value has been
-modified (even if modified to the same value).
-
-
-