bashunit2

bashunit2 is a framework for TAP compliant testing.

Features

This is pure Bash code. There is no framework-specific syntax.
There is only one file that you need to depend on for testing: bashunit2.sh.
You can include your test codes in your library.

Requirements

Bash 4.4+

Quickstart

Implement your first test

In this introduction, we will implement a library that does the calculations. Let us name the library file libcalc.sh.

As a calculation, implement a function that performs addition. Let us name the function that performs the addition calc_add.

We want to make sure calc_add is properly implemented. bashunit2 recognizes a function as a test function if it contains test_ at the beginning of the function name or ::test_ in the middle of the function name. Let us name our function for testing test_calc_add.

Let's write the test first.

The following file shows the code with a few lines added to the previous file.

#!/bin/bash

calc_add() {
  : # TODO: implement here
}

test_calc_add() {
  local result

  result=$(calc_add 1 2)

  [[ "$result" -eq 3 ]]
}

The function test_calc_add executes calc_add, determines from the result whether the addition is correct, and returns the result to the caller of the test function.

Add code to run tests

We have defined two functions calc_add and test_calc_add. However, we currently have no way to run the tests. Let's add some code to make it possible to run the tests in bashunit2.

The following file shows the code with a few lines added to the previous file.

#!/bin/bash

calc_add() {
  : # TODO: implement here
}

test_calc_add() {
  local result

  result=$(calc_add 1 2)

  [[ "$result" -eq 3 ]]
}

run_tests() {
  local script_dir

  script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)

  # shellcheck source=./bashunit2.sh
  source "$script_dir/bashunit2.sh"

  bashunit2::run_tests "$@"
}

if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
  run_tests "$@"
fi

This code can be executed in two ways: first, it can be executed as ./libcalc.sh. The second is as follows: source ./libcalc.sh.

Either way, the script_dir variable will be assigned to the directory where libcalc.sh is located.

To use bashunit2, only one file, bashunit2.sh, is required.

This example assumes that libcalc.sh and bashunit2.sh are in the same directory. However, there is no need for them to be in the same directory. You can place bashunit2.sh anywhere you wish, according to the policies of your project. If you choose to place it in a different directory, set the value of the script_dir variable to an appropriate value.

Run the test and confirm that it fails

Now you can run the test. test_calc_add is already implemented. calc_add is not implemented.

Therefore, the expected behavior is that the test can be executed and the test will fail.

Let's run the test.

The following log is the result of the run.

$ ./libcalc.sh
TAP version 14
1..1
not ok - test_add

bashunit2 outputs test results in TAP format. For more information about TAP, please click here.

In the preceding output, we see the following:

The number of tests is one from 1 to 1.
The test for test_calc_add failed, as the result was printed as not ok.

Optional: Rename the functions

By the way, bashunit2's function naming conventions are based on the Shell Style Guide.

bashunit2 can run library tests using the Shell Style Guide naming conventions.

The bashunit2::run_tests that runs the tests is the function name. bashunit2 represents the library name. bashunit2 will automatically discover the test functions. bashunit2 recognizes test functions with test_ at the beginning of the function name or with ::test_ in the middle of the function name.

For this introduction, let's rename the function name of libcalc.sh as well, as follows:

#!/bin/bash

calc::add() {
  : # TODO: implement here
}

calc::test_add() {
  local result

  result=$(calc::add 1 2)

  [[ "$result" -eq 3 ]]
}

calc::run_tests() {
  local script_dir

  script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)

  # shellcheck source=./bashunit2.sh
  source "$script_dir/bashunit2.sh"

  bashunit2::run_tests "$@"
}

if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
  calc::run_tests "$@"
fi

Of course, renaming functions in libcalc.sh is not required. Implement your library any way you like.

From here on, this introduction will use the renamed code as an example.

Implement the code and run tests

Let's write an implementation of the function calc::add().

#!/bin/bash

calc::add() {
  local n1="$1" n2="$2"
  echo $((n1+n2))
}

calc::test_add() {
  local result

  result=$(calc::add 1 2)

  [[ "$result" -eq 3 ]]
}

calc::run_tests() {
  local script_dir

  script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)

  # shellcheck source=./bashunit2.sh
  source "$script_dir/bashunit2.sh"

  bashunit2::run_tests "$@"
}

if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
  calc::run_tests "$@"
fi

Run the test again to verify that the test passes.

$ ./libcalc.sh
TAP version 14
1..1
ok - calc::test_add

Congratulations! You've implemented calc::add and it passes all your tests!

Another way to run the test

By the way, you can test in another way as follows:

$ source ./libcalc.sh
$ calc::run_tests
TAP version 14
1..1
ok - calc::test_add

If you want to test with interactive operations or override some functions, you may prefer this method.

Implement the application 1

We have implemented calc::add. Let's define a new function that calls calc::add so we can perform addition from the shell. Let us name the function calc::app.

Let us assume that the function has the following main functions:

calc::app -h will output help and exit abnormally.
Output help and exit abnormally if an unknown option is given, like calc::app -x.
Add up integers given as calc::app 2 3.
If an integer number other than 2 is given, like calc::app 2 3 4, help is printed and an abnormal exit is returned.

The following file is the code that implements the tests:

#!/bin/bash

calc::add() {
  local n1="$1" n2="$2"
  echo $((n1+n2))
}

calc::test_add() {
  local result

  result=$(calc::add 1 2)

  [[ "$result" -eq 3 ]]
}

calc::app() {
  : # TODO: implement here
}

calc::test_app_prints_usage_when_h_option_exists() {
  local result

  result=$(calc::app -h)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || exit 1
  [[ "$result" =~ 'Usage:' ]] || exit 1
}

calc::test_app_prints_usage_when_unknown_option_exists() {
  local result

  result=$(calc::app -x)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || exit 1
  [[ "$result" =~ 'Usage:' ]] || exit 1
}

calc::test_app_caluculate_add() {
  local result

  result=$(calc::app 1 2)

  # shellcheck disable=SC2181
  [[ $? -eq 0 ]] || exit 1
  [[ "$result" == 3 ]] || exit 1
}

calc::test_app_prints_usage_when_number_of_arguments_is_not_two() {
  local result

  result=$(calc::app 10 20 30)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || exit 1
  [[ "$result" =~ 'Usage:' ]] || exit 1
}

calc::run_tests() {
  local script_dir

  script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)

  # shellcheck source=./bashunit2.sh
  source "$script_dir/bashunit2.sh"

  bashunit2::run_tests "$@"
}

if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
  calc::run_tests "$@"
fi

We have implemented the test. We have not implemented calc::app. Therefore, when we run the test, we expect it to fail.

The following file is the result of running the test:

TAP version 14
1..5
ok - calc::test_add
not ok - calc::test_app_caluculate_add
not ok - calc::test_app_prints_usage_when_h_option_exists
not ok - calc::test_app_prints_usage_when_number_of_arguments_is_not_two
not ok - calc::test_app_prints_usage_when_unknown_option_exists

As expected, the test failed to run.

Add a helper function to learn about failed evaluations

There are multiple evaluation functions in the test function. At this time, it is difficult to know where the line where the test failed.

In such a case, the recommended solution is to define a wrapper function that executes the exit. The wrapper function should be named calc::_die. The leading underscore in _die is to make it easier for users to understand the meaning of calling it only in the library calc.

The following file shows the code with calc::_die added and the exit of each test function replaced with calc::_die.

#!/bin/bash

# shellcheck disable=SC2120
calc::_die() {
  echo "${1:-Died} at ${BASH_SOURCE[1]} line ${BASH_LINENO[0]}."
  exit 1
}

calc::add() {
  local n1="$1" n2="$2"
  echo $((n1+n2))
}

calc::test_add() {
  local result

  result=$(calc::add 1 2)

  [[ "$result" -eq 3 ]]
}

calc::app() {
  : # TODO: implement here
}

calc::test_app_prints_usage_when_h_option_exists() {
  local result

  result=$(calc::app -h)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || calc::_die
  [[ "$result" =~ 'Usage:' ]] || calc::_die
}

calc::test_app_prints_usage_when_unknown_option_exists() {
  local result

  result=$(calc::app -x)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || calc::_die
  [[ "$result" =~ 'Usage:' ]] || calc::_die
}

calc::test_app_caluculate_add() {
  local result

  result=$(calc::app 1 2)

  # shellcheck disable=SC2181
  [[ $? -eq 0 ]] || calc::_die
  [[ "$result" == 3 ]] || calc::_die
}

calc::test_app_prints_usage_when_number_of_arguments_is_not_two() {
  local result

  result=$(calc::app 10 20 30)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || calc::_die
  [[ "$result" =~ 'Usage:' ]] || calc::_die
}

calc::run_tests() {
  local script_dir

  script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)

  # shellcheck source=./bashunit2.sh
  source "$script_dir/bashunit2.sh"

  bashunit2::run_tests "$@"
}

if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
  calc::run_tests "$@"
fi

After executing this code, you will know which evaluation failed.

The following log shows the results of the test run.

$ ./libcalc.sh
TAP version 14
1..5
ok - calc::test_add
Died at ./libcalc.sh line 53.
not ok - calc::test_app_caluculate_add
Died at ./libcalc.sh line 32.
not ok - calc::test_app_prints_usage_when_h_option_exists
Died at ./libcalc.sh line 62.
not ok - calc::test_app_prints_usage_when_number_of_arguments_is_not_two
Died at ./libcalc.sh line 42.
not ok - calc::test_app_prints_usage_when_unknown_option_exists

You can see the lines where the evaluation failed.

Implement the application 2

Implement parsing of arguments, etc., and make sure all tests can be run.

The following file is the code that makes all tests succeed:

#!/bin/bash

# shellcheck disable=SC2120
calc::_die() {
  echo "${1:-Died} at ${BASH_SOURCE[1]} line ${BASH_LINENO[0]}."
  exit 1
}

calc::add() {
  local n1="$1" n2="$2"
  echo $((n1+n2))
}

calc::test_add() {
  local result

  result=$(calc::add 1 2)

  [[ "$result" -eq 3 ]]
}

calc::_print_app_usage() {
  while IFS='' read -r line; do
    echo "$line"
  done <<__USAGE__
Usage:
  $ calc.sh [options...] value1 value2

Options:
  -h      print this message

Examples:
  Outputs the answer 1 + 2.
    $ ./calc.sh 1 2
__USAGE__

  exit 1
}

calc::app() {
  local opt

  while getopts h opt; do
    case $opt in
      h) calc::_print_app_usage;;
      *) calc::_print_app_usage;;
    esac
  done
  shift $((OPTIND-1))
  if [ $# -ne 2 ]; then
    calc::_print_app_usage
  fi

  calc::add "$1" "$2"
}

calc::test_app_prints_usage_when_h_option_exists() {
  local result

  result=$(calc::app -h)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || calc::_die
  [[ "$result" =~ 'Usage:' ]] || calc::_die
}

calc::test_app_prints_usage_when_unknown_option_exists() {
  local result

  result=$(calc::app -x)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || calc::_die
  [[ "$result" =~ 'Usage:' ]] || calc::_die
}

calc::test_app_caluculate_add() {
  local result

  result=$(calc::app 1 2)

  # shellcheck disable=SC2181
  [[ $? -eq 0 ]] || calc::_die
  [[ "$result" == 3 ]] || calc::_die
}

calc::test_app_prints_usage_when_number_of_arguments_is_not_two() {
  local result

  result=$(calc::app 10 20 30)

  # shellcheck disable=SC2181
  [[ $? -eq 1 ]] || calc::_die
  [[ "$result" =~ 'Usage:' ]] || calc::_die
}

calc::run_tests() {
  local script_dir

  script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)

  # shellcheck source=./bashunit2.sh
  source "$script_dir/bashunit2.sh"

  bashunit2::run_tests "$@"
}

if [[ "${BASH_SOURCE[0]}" == "${0}" ]]; then
  calc::run_tests "$@"
fi

The following logs show the results of the test run:

$ ./libcalc.sh
TAP version 14
1..5
ok - calc::test_add
ok - calc::test_app_caluculate_add
ok - calc::test_app_prints_usage_when_h_option_exists
ok - calc::test_app_prints_usage_when_number_of_arguments_is_not_two
./libcalc.sh: illegal option -- x
ok - calc::test_app_prints_usage_when_unknown_option_exists

./libcalc.sh: illegal option -- x is probably what getopts output to stderr.

Capture standard output, standard error output, and exit status

bashunit2 has the ability to run commands and collect standard output, standard error output, and exit status.

Be sure to add evaluation to your existing tests to verify that the illegal option is output.

The following function is rewritten code in bashunit2::run:

calc::test_app_prints_usage_when_unknown_option_exists() {
  local exit_status stdout stderr

  bashunit2::run calc::app -x
  exit_status=$(bashunit2::print_run_last_exit_status)
  stdout=$(bashunit2::print_run_last_stdout)
  stderr=$(bashunit2::print_run_last_stderr)

  [[ $exit_status -eq 1 ]] || calc::_die
  [[ "$stdout" =~ 'Usage:' ]] || calc::_die
  [[ "$stderr" =~ 'illegal option' ]] || calc::_die
}

The following log shows the results of the test run:

$ ./libcalc.sh
TAP version 14
1..5
ok - calc::test_add
ok - calc::test_app_caluculate_add
ok - calc::test_app_prints_usage_when_h_option_exists
ok - calc::test_app_prints_usage_when_number_of_arguments_is_not_two
ok - calc::test_app_prints_usage_when_unknown_option_exists

Implement the application 3

Finally, create the code to run calc::app. Let us name the file calc.sh.

The next file is calc.sh:

#!/bin/bash

script_dir=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)

# shellcheck source=./libcalc.sh
source "$script_dir/libcalc.sh"

calc::app "$@"

The script_dir variable is assigned to the calc.sh directory.

libcalc.sh in the same directory is loaded.

Then calc::app is executed.

Now, let's run ./calc.sh 1 2 is executed.

$ ./calc.sh 1 2
3

Congratulations!

You can now use the tested and quality-assured libcalc.sh from calc.sh!

TODO

Add assert_*()
Add document for mock

Name		Name	Last commit message	Last commit date
Latest commit History 46 Commits
.github/workflows		.github/workflows
demo/calc		demo/calc
docgen		docgen
tests		tests
LICENSE		LICENSE
README.md		README.md
bashunit2.sh		bashunit2.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

bashunit2

Features

Requirements

Quickstart

Implement your first test

Add code to run tests

Run the test and confirm that it fails

Optional: Rename the functions

Implement the code and run tests

Another way to run the test

Implement the application 1

Add a helper function to learn about failed evaluations

Implement the application 2

Capture standard output, standard error output, and exit status

Implement the application 3

TODO

Similar projects

About

Releases

Packages

Languages

License

kumarstack55/bashunit2

Folders and files

Latest commit

History

Repository files navigation

bashunit2

Features

Requirements

Quickstart

Implement your first test

Add code to run tests

Run the test and confirm that it fails

Optional: Rename the functions

Implement the code and run tests

Another way to run the test

Implement the application 1

Add a helper function to learn about failed evaluations

Implement the application 2

Capture standard output, standard error output, and exit status

Implement the application 3

TODO

Similar projects

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages