Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)

ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE

Home Assistant Presence Simulation

Easy to use device for connecting "old" measuring units (water, power, gas, ...) to the digital world

Github for hosting the documentation for the project: https://github.com/jomjol/AI-on-the-edge-device

A GCode sender (not only for lasers or plotters) for up to two GRBL controller. SVG, DXF, HPGL import. 6 axis DRO.

CADs and STLs that can be adapted to various 3D printers in order to benefit from the best Z wobble management system.

My repositary

Program allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino, FT232H.

The next generation of motion control firmware

OctoDash is a simple, but beautiful dashboard for OctoPrint.

MicroPython for K210 RISC-V, let's play with edge AI easier

MicroPython SSD1351 OLED Display Driver