- Important Change from v2.1.0
- Why do we need this AsyncUDP_WT32_ETH01 library
- Changelog
- Prerequisites
- Installation
- Libraries' Patches
- HOWTO Fix
Multiple Definitions
Linker Error - HOWTO Use analogRead() with ESP32 running WiFi and/or BlueTooth (BT/BLE)
- HOWTO Setting up the Async UDP Client
- Examples
- Example AsyncUdpNTPClient
- Debug Terminal Output Samples
- Debug
- Troubleshooting
- Issues
- TO DO
- DONE
- Contributions and Thanks
- Contributing
- License
- Copyright
Please have a look at HOWTO Fix Multiple Definitions
Linker Error
Why do we need this AsyncUDP_WT32_ETH01 library
This AsyncUDP_WT32_ETH01 library is a fully asynchronous UDP library, designed for a trouble-free, multi-connection network environment, for WT32_ETH01 (ESP32 + LAN8720 Ethernet). The library is easy to use and includes support for Unicast, Broadcast and Multicast environments.
This library is based on, modified from:
to apply the better and faster asynchronous feature of the powerful AsyncUDP into WT32_ETH01.
- Using asynchronous network means that you can handle more than one connection at the same time
- You are called once the request is ready and parsed
- When you send the response, you are immediately ready to handle other connections while the server is taking care of sending the response in the background
- Speed is OMG
- After connecting to a UDP server as an Async Client, you are immediately ready to handle other connections while the Client is taking care of receiving the UDP responding packets in the background.
- You are not required to check in a tight loop() the arrival of the UDP responding packets to process them.
- WT32_ETH01 boards using ESP32-based boards and LAN8720 Ethernet
-
ESP32 Core 2.0.5+
for ESP32-based boards. -
WebServer_WT32_ETH01 library 1.5.1+
. To install, check.
The suggested way to install is to:
The best way is to use Arduino Library Manager
. Search for AsyncUDP_WT32_ETH01
, then select / install the latest version. You can also use this link for more detailed instructions.
- Navigate to AsyncUDP_WT32_ETH01 page.
- Download the latest release
AsyncUDP_WT32_ETH01-main.zip
. - Extract the zip file to
AsyncUDP_WT32_ETH01-main
directory - Copy the whole
AsyncUDP_WT32_ETH01-main
folder to Arduino libraries' directory such as~/Arduino/libraries/
.
- Install VS Code
- Install PlatformIO
- Install AsyncUDP_WT32_ETH01 library by using Library Manager. Search for AsyncUDP_WT32_ETH01 in Platform.io Author's Libraries
- Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File
To fix ESP32 compile error
, just copy the following file into the ESP32
cores/esp32 directory (e.g. ./arduino-1.8.15/hardware/espressif/cores/esp32) to overwrite the old file:
The current library implementation, using xyz-Impl.h
instead of standard xyz.cpp
, possibly creates certain Multiple Definitions
Linker error in certain use cases.
You can include this .hpp
file
// Can be included as many times as necessary, without `Multiple Definitions` Linker Error
#include "AsyncUDP_WT32_ETH01.hpp" //https://github.com/khoih-prog/AsyncUDP_WT32_ETH01
in many files. But be sure to use the following .h
file in just 1 .h
, .cpp
or .ino
file, which must not be included in any other file, to avoid Multiple Definitions
Linker Error
// To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error
#include "AsyncUDP_WT32_ETH01.h" //https://github.com/khoih-prog/AsyncUDP_WT32_ETH01
Check the new multiFileProject example for a HOWTO
demo.
Please have a look at ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to have more detailed description and solution of the issue.
- ADC1 controls ADC function for pins GPIO32-GPIO39
- ADC2 controls ADC function for pins GPIO0, 2, 4, 12-15, 25-27
Look in file adc_common.c
In ADC2, there're two locks used for different cases:
lock shared with app and Wi-Fi: ESP32: When Wi-Fi using the ADC2, we assume it will never stop, so app checks the lock and returns immediately if failed. ESP32S2: The controller's control over the ADC is determined by the arbiter. There is no need to control by lock.
lock shared between tasks: when several tasks sharing the ADC2, we want to guarantee all the requests will be handled. Since conversions are short (about 31us), app returns the lock very soon, we use a spinlock to stand there waiting to do conversions one by one.
adc2_spinlock should be acquired first, then adc2_wifi_lock or rtc_spinlock.
- In order to use ADC2 for other functions, we have to acquire complicated firmware locks and very difficult to do
- So, it's not advisable to use ADC2 with WiFi/BlueTooth (BT/BLE).
- Use ADC1, and pins GPIO32-GPIO39
- If somehow it's a must to use those pins serviced by ADC2 (GPIO0, 2, 4, 12, 13, 14, 15, 25, 26 and 27), use the fix mentioned at the end of ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to work with ESP32 WiFi/BlueTooth (BT/BLE).
#define ASYNC_UDP_WT32_ETH01_DEBUG_PORT Serial
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_UDP_WT32_ETH01_LOGLEVEL_ 1
#include <AsyncUDP_WT32_ETH01.h>
/////////////////////////////////////////////
// Select the IP address according to your local network
IPAddress myIP(192, 168, 2, 232);
IPAddress myGW(192, 168, 2, 1);
IPAddress mySN(255, 255, 255, 0);
// Google DNS Server IP
IPAddress myDNS(8, 8, 8, 8);
/////////////////////////////////////////////
#include <time.h>
// 0.ca.pool.ntp.org
IPAddress timeServerIP = IPAddress(208, 81, 1, 244);
// time.nist.gov
//IPAddress timeServerIP = IPAddress(132, 163, 96, 1);
#define NTP_REQUEST_PORT 123
const int NTP_PACKET_SIZE = 48; // NTP timestamp is in the first 48 bytes of the message
byte packetBuffer[NTP_PACKET_SIZE]; // buffer to hold incoming and outgoing packets
// A UDP instance to let us send and receive packets over UDP
AsyncUDP Udp;
// send an NTP request to the time server at the given address
void createNTPpacket(void)
{
...
}
void sendNTPPacket(void)
{
createNTPpacket();
//Send unicast
Udp.write(packetBuffer, sizeof(packetBuffer));
}
void parsePacket(AsyncUDPPacket packet)
{
...
}
void setup()
{
...
//NTP requests are to port NTP_REQUEST_PORT = 123
if (Udp.connect(timeServerIP, NTP_REQUEST_PORT))
{
// Setting up Async packet Handler
Udp.onPacket([](AsyncUDPPacket packet)
{
parsePacket(packet);
});
}
}
void loop()
{
sendNTPPacket();
// wait 60 seconds before asking for the time again
delay(60000);
}
- AsyncUDPClient
- AsyncUdpNTPClient
- AsyncUdpSendReceive
- AsyncUDPServer
- AsyncUDPMulticastServer
- multiFileProject New
Example AsyncUdpNTPClient
AsyncUDP_WT32_ETH01/examples/AsyncUdpNTPClient/AsyncUdpNTPClient.ino
Lines 11 to 175 in 38f1469
This is terminal debug output when running AsyncUdpNTPClient on WT32_ETH01 (ESP32 + LAN8720). It connects to NTP Server using AsyncUDP_WT32_ETH01 library, and requests NTP time every 60s. The packet is then received and processed asynchronously to print current UTC/GMT time.
Starting AsyncUdpNTPClient on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0+
AsyncUdp_WT32_ETH01 v2.1.0 for core v2.0.0+
ETH Started
ETH Connected
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.95
FULL_DUPLEX, 100Mbps
AsyncUdpNTPClient started @ IP address: 192.168.2.232
UDP connected
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.232:50549, Length: 48
Seconds since Jan 1 1900 = 3847193050
Epoch/Unix time = 1638204250
The UTC/GMT time is Mon 2021-11-29 16:44:10 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.232:50549, Length: 48
Seconds since Jan 1 1900 = 3847193110
Epoch/Unix time = 1638204310
The UTC/GMT time is Mon 2021-11-29 16:45:10 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 208.81.1.244:123, To: 192.168.2.232:50549, Length: 48
Seconds since Jan 1 1900 = 3847193170
Epoch/Unix time = 1638204370
The UTC/GMT time is Mon 2021-11-29 16:46:10 GMT
Starting AsyncUdpNTPClient on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0+
AsyncUdp_WT32_ETH01 v2.1.0 for core v2.0.0+
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232
FULL_DUPLEX, 100Mbps
AsyncUdpNTPClient started @ IP address: 192.168.2.232
UDP connected
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 132.163.96.1:123, To: 192.168.2.232:50549, Length: 48
Seconds since Jan 1 1900 = 3847193590
Epoch/Unix time = 1638204790
The UTC/GMT time is Mon 2021-11-29 16:53:10 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 132.163.96.1:123:123, To: 192.168.2.232:50549, Length: 48
Seconds since Jan 1 1900 = 3847193650
Epoch/Unix time = 1638204850
The UTC/GMT time is Mon 2021-11-29 16:54:10 GMT
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 132.163.96.1:123:123, To: 192.168.2.232:50549, Length: 48
Seconds since Jan 1 1900 = 3847193710
Epoch/Unix time = 1638204910
The UTC/GMT time is Mon 2021-11-29 16:55:10 GMT
This is terminal debug output when running AsyncUDPSendReceive on WT32_ETH01 (ESP32 + LAN8720). It connects to NTP Server time.nist.gov
(IP=132.163.96.1) using AsyncUDP_WT32_ETH01 library, and requests NTP time every 60s. The packet is received and processed asynchronously to print current UTC/GMT time. The ACK packet is then sent.
Starting AsyncUDPSendReceive on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0+
AsyncUdp_WT32_ETH01 v2.1.0 for core v2.0.0+
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232
FULL_DUPLEX, 100Mbps
AsyncUDPSendReceive started @ IP address: 192.168.2.232
Starting connection to server...
UDP connected
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 132.163.96.1:123, To: 192.168.2.232:62775, Length: 48
Seconds since Jan 1 1900 = 3834968497
Epoch/Unix time = 1625979697
The UTC/GMT time is Sun 2021-07-11 05:01:37 GMT
============= sendACKPacket =============
============= createNTPpacket =============
Received UDP Packet Type: Unicast
From: 132.163.96.1:123, To: 192.168.2.232:62775, Length: 48
Seconds since Jan 1 1900 = 3834968557
Epoch/Unix time = 1625979757
The UTC/GMT time is Sun 2021-07-11 05:02:37 GMT
============= sendACKPacket =============
Debug is enabled by default on Serial. To disable, use level 0
#define ASYNC_UDP_WT32_ETH01_DEBUG_PORT Serial
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_UDP_WT32_ETH01_LOGLEVEL_ 1
You can also change the debugging level from 0 to 4
#define ASYNC_UDP_WT32_ETH01_DEBUG_PORT Serial
// Use from 0 to 4. Higher number, more debugging messages and memory usage.
#define _ASYNC_UDP_WT32_ETH01_LOGLEVEL_ 4
If you get compilation errors, more often than not, you may need to install a newer version of Arduino IDE, the Arduino STM32
core or depending libraries.
Sometimes, the library will only work if you update the STM32
core to the latest version because I am always using the latest cores /libraries.
Submit issues to: AsyncUDP_WT32_ETH01 issues
- Fix bug. Add enhancement
- Initial port to to WT32_ETH01 (ESP32 + LAN8720)
- Add more examples.
- Add debugging features.
- Auto detect ESP32 core to use for WT32_ETH01
- Fix bug in WT32_ETH01 examples to reduce connection time
- Fix
multiple-definitions
linker error. - Add example multiFileProject to demo for multiple-file project
- Based on and modified from Hristo Gochkov's AsyncUDP. Many thanks to Hristo Gochkov for great AsyncUDP Library
![]() ⭐️⭐️ Hristo Gochkov |
If you want to contribute to this project:
- Report bugs and errors
- Ask for enhancements
- Create issues and pull requests
- Tell other people about this library
- The library is licensed under GPLv3
Copyright (c) 2018- Hristo Gochkov
Copyright (c) 2021- Khoi Hoang