This firmware is a fork from flipperdevices/flipperzero-firmware
Our goal is to make all features possible on this device without any limitations!
This software is for experimental purposes only and is not meant for any illegal activity/purposes.
We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law.
Also, this software is made without any support from Flipper Devices and is in no way related to the official devs.
Our Discord Community:
- Sub-GHz regional TX restrictions removed
- Sub-GHz frequency range can be extended in settings file (Warning: It can damage Flipper's hardware)
- Many rolling code protocols now have the ability to save & send captured signals
- FAAC SLH (Spa) & BFT Mitto (keeloq secure with seed) manual creation
- Sub-GHz static code brute-force plugin
- LFRFID Fuzzer plugin
- Custom community plugins and games added + all known working apps can be downloaded in extra pack in every release
- Extra Sub-GHz frequencies + extra Mifare Classic keys
- Picopass/iClass plugin included in releases
- Recompiled IR TV Universal Remote for ALL buttons
- Universal remote for Projectors, Fans, A/Cs and Audio(soundbars, etc.)
- Customizable Flipper name
- BadUSB -> Keyboard layouts (by rien > dummy-decoy)
- Sub-GHz -> External CC1101 module support - (by quen0n)
- Sub-GHz ->
Add manually
menu extended with new protocols - Sub-GHz -> New frequency analyzer - (by ClusterM)
- Sub-GHz -> Save last used frequency (by derskythe)
- Sub-GHz -> Press OK in frequency analyzer to use detected frequency in Read modes (by derskythe)
- Sub-GHz -> Long press OK button in Sub-GHz Frequency analyzer to switch to Read menu (by derskythe)
- Lock device with pin(or regular lock if pin not set) by holding UP button on main screen (by an4tur0r)
- Sub-GHz -> Short press OK in frequency analyzer to save detected frequency for usage in Read modes
- Sub-GHz -> Long press OK button in Sub-GHz Frequency analyzer to switch to Read menu and automatically use selected frequency
- Sub-GHz -> External CC1101 module support (Hardware SPI used)
- SubGHz -> Hold right in received signal list to delete selected signal
- SubGHz -> Custom buttons for Keeloq / Alutech AT4N / Nice Flor S / Somfy Telis / Security+ 2.0 - now you can use arrow buttons to send signal with different button code
- SubGHz -> BFT Mitto / Somfy Telis / Nice Flor S manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis)
- SubGHz -> Debug mode counter increase settings (+1 -> +5, +10, default: +1)
- SubGHz -> Debug PIN output settings for protocol development
- Infrared -> Debug TX PIN output settings
- Other small fixes and changes throughout
- See other changes in readme below
Also check the changelog in releases for latest updates!
Thanks to Official team (to their SubGHz Developer, Skorp) for implementing decoders for these protocols.
Keeloq [Not ALL systems supported for decode or emulation yet!] - Supported manufacturers list
Encoders or sending made by @xMasterX:
- Keeloq: HCS101
- Keeloq: AN-Motors
- Keeloq: JCM Tech
- Keeloq: MHouse
- Keeloq: Nice Smilo
- Keeloq: DTM Neo
- Keeloq: FAAC RC,XT
- Keeloq: Mutancode
- Keeloq: Normstahl
- Keeloq: Beninca + Allmatic
- Keeloq: Stilmatic / Schellenberg
- Keeloq: CAME Space
- Keeloq: Aprimatic (model TR and similar)
Encoders/sending made by @Eng1n33r & @xMasterX:
- CAME Atomo
- Nice Flor S
- FAAC SLH (Spa) [External seed calculation required (For info contact me in Discord: Nano#8998)]
- Keeloq: BFT Mitto [External seed calculation required (For info contact me in Discord: Nano#8998)] -> Update! check out new instructions
- Star Line
- Security+ v1 & v2
Encoders made by @assasinfil & @xMasterX:
- Somfy Telis
- Somfy Keytis
- KingGates Stylo 4k
- Alutech AT-4N
- Nice ON2E (Nice One)
The majority of this project is developed and maintained by me, @xMasterX. I'm unemployed because of the war, and the only income I receive is from your donations. Our team is small and the guys are working on this project as much as they can solely based on the enthusiasm they have for this project and the community.
- @assasinfil - SubGHz
- @Svaarich - UI design and animations
- @Amec0e - Infrared assets
- Community moderators in Telegram, Discord, and Reddit
- And of course our GitHub community. Your PRs are a very important part of this firmware and open-source development.
The amount of work done on this project is huge and we need your support, no matter how large or small. Even if you just say, "Thank you Unleashed firmware developers!" somewhere. Doing so will help us continue our work and will help drive us to make the firmware better every time. Also, regarding our releases, every build has and always will be free and open-source. There will be no paywall releases or closed-source apps within the firmware. As long as I am working on this project it will never happen. You can support us by using links or addresses below:
- Boosty (patreon alternative): https://boosty.to/mmxdev
- Ko-Fi: https://ko-fi.com/masterx
- cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
- YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
- USDT(TRC20):
TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
- BCH:
qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
- ETH/BSC/ERC20-Tokens:
darkflippers.eth
(or0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
) - BTC:
bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
- DOGE:
D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
- LTC:
ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
- XMR (Monero):
41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
- TON:
EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf
- RFID Fuzzer (by Ganapati & @xMasterX) & New protocols by @mvanzanten
- Sub-GHz bruteforcer (by @derskythe & xMasterX) (original by Ganapati & xMasterX)
- Sub-GHz playlist (by darmiel)
- ESP8266 Deauther plugin (by SequoiaSan)
- WiFi Scanner plugin (by SequoiaSan)
- MultiConverter plugin (by theisolinearchip)
- WAV Player (OFW: DrZlo13) - Fixed and improved by LTVA1 -> Also outputs audio on
PA6
-3(A6)
pin - Barcode generator plugin (original by McAzzaMan) - EAN-8 and refactoring by @msvsergey
- GPIO: Sentry Safe plugin (by H4ckd4ddy)
- ESP32: WiFi Marauder companion plugin (by 0xchocolate) - Saving .pcap on flipper microSD by tcpassos -> Only with custom marauder build (It is necessary to uncomment "#define WRITE_PACKETS_SERIAL" in configs.h (in marauder fw) and compile the firmware for the wifi board.) Or download precompiled build -> Download esp32_marauder_ver_flipper_sd_serial.bin
- NRF24: Sniffer & MouseJacker (with changes) (by mothball187)
- Simple Clock (timer by GMMan) (original by CompaqDisc)
- Sub-GHz Remote (UniversalRF Remix) (by @darmiel & @xMasterX) (original by @ESurge)
- Spectrum Analyzer (with changes) (by jolcese) - Ultra Narrow mode & scan channels non-consecutively
- Metronome (by panki27)
- DTMF Dolphin (by litui)
- TOTP (Authenticator) (by akopachov)
- GPS (by ezod) works with module
NMEA 0183
via UART (13TX, 14RX, GND pins on Flipper) - i2c Tools (by NaejEL) - C0 -> SCL / C1 -> SDA / GND -> GND | 3v3 logic levels only!
- HC-SR04 Distance sensor - Ported and modified by @xMasterX (original by Sanqui) - How to connect -> (5V -> VCC) / (GND -> GND) / (13|TX -> Trig) / (14|RX -> Echo)
- Morse Code (by wh00hw)
- Unitemp - Temperature sensors reader (DHT11/22, DS18B20, BMP280, HTU21x and more) (by quen0n)
- BH1750 - Lightmeter (by oleksiikutuzov)
- iButton Fuzzer (by xMasterX)
- HEX Viewer (by QtRoS)
- POCSAG Pager (by xMasterX & Shmuma)
- Text Viewer (by kowalski7cc & kyhwana)
- UART Terminal (by cool4uma)
- ProtoView (by antirez)
- SWD Probe (by g3gg0)
Games:
- DOOM (fixed) (by p4nic4ttack)
- Zombiez (Reworked By DevMilanIan) (Original By Dooskington)
- Flappy Bird (by DroomOne)
- Arkanoid (refactored by xMasterX) (by gotnull)
- Tic Tac Toe (refactored by xMasterX) (by gotnull)
- Tetris (with fixes) (by jeffplang)
- Minesweeper (by panki27)
- Heap Defence (aka Stack Attack) - Ported to latest firmware by @xMasterX - (original by wquinoa & Vedmein)
- Game15 (by x27)
- Solitaire (by teeebor)
- BlackJack (by teeebor)
- 2048 game (by eugene-kirzhanov)
- How to use Flipper as new remote (Nice FlorS, BFT Mitto, Somfy Telis, Aprimatic, AN-Motors, etc..)
-
Unofficial Discord: discord.unleashedflip.com
-
Hello world - plugin tutorial (English): https://github.com/DroomOne/Flipper-Plugin-Tutorial
-
Hello world - plugin tutorial (in Russian): https://yakovlev.me/hello-flipper-zero/
-
CLion IDE - How to setup workspace for flipper firmware development: https://krasovs.ky/2022/11/01/flipper-zero-clion.html
-
Docs by atmanos / How to write your own app (outdated API): https://flipper.atmanos.com/docs/overview/intro
-
Official Docs: https://docs.flipperzero.one
-
Official Forum: forum.flipperzero.one
applications
- Applications and services used in firmwareassets
- Assets used by applications and servicesfuri
- Furi Core: OS-level primitives and helpersdebug
- Debug tool: GDB-plugins, SVD-file and etcdocumentation
- Documentation generation system configs and input filesfirmware
- Firmware source codelib
- Our and 3rd party libraries, drivers and etc...site_scons
- Build helpersscripts
- Supplementary scripts and python libraries home
Also, pay attention to the ReadMe.md
files inside those directories.