Basic hardware flight controller for Elite Dangerous (for Arduino)

This MUST be used with an Arduino compatible with the USB HID library (Leonardo, or any 32u4 chipset.. possibly others)

See: http:https://i.imgur.com/ilhbTcL.jpg

Left to Right; the Switches 1 to 4 are toggle type, and the two buttons are marked red and black.

Wiring: Toggle 1 (Lights) - Digital 7 Toggle 2 (Cargo Scoop) - Digital 6 Toggle 3 (Landing Gear) - Digital 5 Toggle 4 (Throttle 100% when up, 75% when down) - Digital 4 Red Button (Full Stop / 0% Throttle) - Digital 3 Black Button (Jump / Cruise) - Digital 2

Wire switches so they are active when switched to GND

Key Bindings Required: Lights - 'B' Cargo Scoop - 'HOME' (Default) Landing Gear - 'L' (Default) Throttle 100% - 'I' Throttle 75% - 'K' Full Stop - 'X' (Default) Jump - 'J' (Default)