This application can talk to switches (mainly HP ProCurve) via SNMP (v2,v3) and configure switch behaviour like VLAN, radius auth, port access control (802.1x).

Configuring HP ProCurve switches in a small business environment is done usually by invoking the ssh, connecting to each switch and running commands via command line (CLI) or the menu.

Having a good overview about configured VLANS, ports, port aliases, etc. might be useful if you have more then 2 or 3 switches around.

Your setup may be on the other too small for the expensive ProCurve Manager software. Or even better you like the idea of free software.

Then the snmp-manager might be a good base for your own management system.

• Easy configurable through settings.cfg
• Create, rename, destroy VLANs
• Enable port-auth on switch and configure ports to use 802.1x
• Have switch information (like firmware revision or model) readily available on overview page
• See connected (up) or unused ports (down)

git clone https://github.com/jkur/snmp-manager.git
cd snmp-manager
virtualenv -p /usr/bin/python3 env
env/bin/pip install -r requirements.txt
env/bin/python wsgi.py

• snmp-manager is developed with Python3.x (needed for easysnmp)
• It uses easysnmp for SNMP handling.
• The web application part is based on Flask.