• Imam Wahyu Amanullah, Universiti Teknikal Melaka Malaysia, Malaysia
• Fadhlil Rizki Muhammad, The University of Melbourne, Australia
• Akhmad Faqih, IPB University, Indonesia

Pra-Instalasi: Unduh kode sumber (.zip) dan ekstrak dalam sebuah folder contoh: Downloads / SEACOAPP-main

Unduh dan unzip data observasi (CMEMS-data observasi satelit). https://drive.google.com/file/d/13XoX2OxtWl-0VAq4kd9hsRXIuOnOdt-5/view?usp=sharing Tempatkan file unzip di Downloads / SEACOAPP-main.

Instalasi:

1. Pastikan Python 3 diinstal
2. Buka CMD
3. ketik "cd Downloads / SEACOAPP-main" pada prompt cmd. (tanpa tanda kutip)
4. Instal modul yang diperlukan di file reqs.txt

ketik: pip install -r reqs.txt

Saat ini, ada bug di dash-renderer. Oleh karena itu, kami menyarankan untuk memasang paksa versi lama dari dash-renderer

tulis lagi: pip install --no-dep dash-renderer==1.1.2

3. Jalankan programnya python seacoapp.py

4. Terminal akan menampilkan link localhost untuk aplikasi tersebut. Salin tautan dan tempel di browser web

   contoh: http:https://127.0.0.1:XXXX/

1. Pastikan Python 3 diinstal
2. Buka terminal
3. Tulis "cd Downloads / SEACOAPP-main" di terminal. (tanpa kutipan)
4. Instal modul yang diperlukan di file reqs.txt

ketik: pip install -r reqs.txt

Saat ini, ada bug di dash-renderer. Oleh karena itu, kami menyarankan untuk memasang paksa versi lama dari penyaji dasbor

tulis lagi: pip install --no-dep dash-renderer == 1.1.2

3. Jalankan programnya python seacoapp.py

4. Terminal akan menampilkan tautan localhost untuk aplikasi tersebut. Salin tautan dan tempel di browser web

   contoh: http:https://127.0.0.1:XXXX/

Pre-Installation: Download the source code (.zip) and unpack it in a folder example: Downloads/SEACOAPP-main

Download and unzip the observation data (CMEMS-satellite observation data). https://drive.google.com/file/d/13XoX2OxtWl-0VAq4kd9hsRXIuOnOdt-5/view?usp=sharing Place the unzipped file in the Downloads/SEACOAPP-main.

Installation:

1. Make sure Python 3 is installed
2. Open CMD
3. Write "cd Downloads/SEACOAPP-main" in the cmd prompt. (without quote)
4. Install the requred modules in file reqs.txt

write: pip install -r reqs.txt

We recommend to force install the older verison of dash-renderer, due to the bug in the newest version.

write again:
pip install --no-dep dash-renderer==1.1.2

3. Run the program python seacoapp.py

4. The terminal will show the localhost link for the app. Copy the link and paste it on web browser

   example : http:https://127.0.0.1:XXXX/

1. Make sure Python 3 is installed
2. Open terminal
3. Write "cd Downloads/SEACOAPP-main" in the terminal. (without quote)
4. Install the requred modules in file reqs.txt

write: pip install -r reqs.txt

We recommend to force install the older verison of dash-renderer, due to the bug in the newest version.

write again:
pip install --no-dep dash-renderer==1.1.2

3. Run the program python seacoapp.py

4. The terminal will show the localhost link for the app. Copy the link and paste it on web browser

   example : http:https://127.0.0.1:XXXX/

https://github.com/fadhlilRmuhammad/ReGISFEST2020/releases/tag/IndoSLR-v2.0