The st7567 display platform allows you to use ST7567 (Taobao) displays with ESPHome.

Connect the pins according to the item description. CS to cs_pin, RST to reset_pin, A0 to dc_pin, SCK to clk_pin, and finally SDA to mosi_pin.

# Example configuration entry
spi:
    clk_pin: GPIO0
    mosi_pin: GPIO3

display:
    - platform: st7567
      cs_pin: GPIO4
      dc_pin: GPIO5
      reset_pin: GPIO1
      lambda: |-
        it.print(0, 0, id(font), "Hello World!");

• cs_pin (Required, :ref:Pin Schema <config-pin_schema>): The Chip Select (CS) pin.
• dc_pin (Required, :ref:Pin Schema <config-pin_schema>): The A0 pin.
• reset_pin (Optional, :ref:Pin Schema <config-pin_schema>): The RESET pin. Defaults to not connected.
• rotation (Optional): Set the rotation of the display. Everything you draw in lambda: will be rotated by this option. One of 0° (default), 90°, 180°, 270°.
• width (Optional, int): Width of the display. Numbers are only allowed between 0~132. Defaults to 128.
• height (Optional, int): Height of the display. Numbers are only allowed between 0~64. Defaults to 64.
• flip_x (Optional, boolean): Flip the horizontal axis on the screen. Defaults to true.
• flip_y (Optional, boolean): Flip the vertical axis on the screen. Defaults to false.
• offset_x (Optional, int): Set this option if some horizontal pixel is missing. Numbers are only allowed between -64~64. Defaults to 0.
• offset_y (Optional, int): Set this option if some vertical pixel is missing. Numbers are only allowed between -32~32. Defaults to 0.
• reg_ratio (Optional, int): Set this option and ev_value to setup contrast. Numbers are only allowed between 0~7. Defaults to 4.
• ev_value (Optional, int): Set this option and reg_ratio to setup contrast. Numbers are only allowed between 0~63. Defaults to 31. A middle value is recommended by the datasheet.
• invert (Optional, boolean): Invert all pixel state on the display. Defaults to false.
• bias_high (Optional, boolean): If set to true, the bias will be 1/7, otherwise it will be 1/9. Defaults to false.
• booster_high (Optional, boolean): If set to true, the booster will be x5, otherwise it will be x4. Defaults to false.
• lambda (Optional, :ref:lambda <config-lambda>): The lambda to use for rendering the content on the display. See :ref:display-engine for more information.
• update_interval (Optional, :ref:config-time): The interval to re-draw the screen. Defaults to 1s.
• pages (Optional, list): Show pages instead of a single lambda. See :ref:display-pages.
• spi_id (Optional, :ref:config-id): Manually specify the ID of the :ref:SPI Component <spi> if you want to use multiple SPI buses.
• id (Optional, :ref:config-id): Manually specify the ID used for code generation.