Copy all your gpx files to GPX_OUT or new gpx files

python3(python) run_page/gpx_sync.py

Copy all your tcx files to TCX_OUT or new tcx files

python3(python) run_page/tcx_sync.py

Copy all your tcx files to FIT_OUT or new fit files

python3(python) run_page/fit_sync.py

• If you only want to sync type running add args --only-run
• If you only want tcx files add args --tcx
• If you only want fit files add args --fit
• If you are using Garmin as a data source, it is recommended that you pull the code to your local environment to run and obtain the Garmin secret. The Python version must be >=3.8

Enter the following command in the terminal

# to get secret_string
python3(python) run_page/get_garmin_secret.py ${your email} ${your password}

Copy the Secret output in the terminal,If you are using Github, please configure GARMIN_SECRET_STRING in Github Action.

# use this secret_string
python3(python) run_page/garmin_sync.py ${secret_string}

example：

python3(python) run_page/get_garmin_secret.py xxxxxxxxxxx

only-run：

python3(python) run_page/garmin_sync.py xxxxxxxxxxxxxx(secret_string) --only-run

• If you only want to sync type running add args --only-run
• If you only want tcx files add args --tcx
• If you only want fit files add args --fit
• If you are using Garmin as a data source, it is recommended that you pull the code to your local environment to run and obtain the Garmin secret. The Python version must be >=3.10

Enter the following command in the terminal

# to get secret_string
python3(python) run_page/get_garmin_secret.py ${your email} ${your password} --is-cn

Copy the Secret output in the terminal,If you are using Github, please configure GARMIN_SECRET_STRING_CN in Github Action.

example：

python3(python) run_page/garmin_sync.py xxxxxxxxx(secret_string) --is-cn

only-run：

python3(python) run_page/garmin_sync.py xxxxxxxxxxxxxx(secret_string)  --is-cn --only-run

• If you only want to sync type running add args --only-run The Python version must be >=3.10

Enter the following command in the terminal

# to get secret_string
python3(python) run_page/get_garmin_secret.py ${your email} ${your password} --is-cn

Enter the following command in the terminal

# to get secret_string
python3(python) run_page/get_garmin_secret.py ${your email} ${your password}

Enter the following command in the terminal

# to sync garmin-cn to garmin-global
python3(python) run_page/garmin_sync_cn_global.py ${garmin_cn_secret_string} ${garmin_secret_string}

Please note: When you choose to deploy running_page on your own server, due to Nike has blocked some IDC's IP band, maybe your server cannot sync Nike Run Club's data correctly and display 403 error, then you have to change another way to host it.

Get Nike's refresh_token

ALL need to do outside GFW

1. Login from this website, open F12 -> XHR -> get the refresh_token from login api.

2. copy this refresh_token and use it in GitHub Secrets or in command line

3. Execute in the root directory:

python3(python) run_page/nike_sync.py ${nike refresh_token}

example：

python3(python) run_page/nike_sync.py eyJhbGciThiMTItNGIw******

1. Sign in/Sign up Strava account
2. Open after successful Signin Strava Developers -> Create & Manage Your App
3. Create My API Application: Enter the following information

Created successfully:

4. Use the link below to request all permissions: Replace ${your_id} in the link with My API Application Client ID

https://www.strava.com/oauth/authorize?client_id=${your_id}&response_type=code&redirect_uri=https://localhost/exchange_token&approval_prompt=force&scope=read_all,profile:read_all,activity:read_all,profile:write,activity:write

Example:

https://www.strava.com/oauth/authorize?client_id=115321&response_type=code&redirect_uri=https://localhost/exchange_token&approval_prompt=force&scope=read_all,profile:read_all,activity:read_all,profile:write,activity:write

5. Get the code value in the link

example：

https://localhost/exchange_token?state=&code=1dab37edd9970971fb502c9efdd087f4f3471e6e&scope=read,activity:write,activity:read_all,profile:write,profile:read_all,read_all

code value：

1dab37edd9970971fb502c9efdd087f4f3471e6

6. Use Client_id、Client_secret、Code get refresh_token: Execute in Terminal/iTerm

curl -X POST https://www.strava.com/oauth/token \
-F client_id=${Your Client ID} \
-F client_secret=${Your Client Secret} \
-F code=${Your Code} \
-F grant_type=authorization_code

example：

curl -X POST https://www.strava.com/oauth/token \
-F client_id=12345 \
-F client_secret=b21******d0bfb377998ed1ac3b0 \
-F code=d09******b58abface48003 \
-F grant_type=authorization_code

7. Sync Strava data

The first time you synchronize Strava data you need to change line 12 of the code False to True in strava_sync.py, and then change it to False after it finishes running. If you only want to sync type running add args --only-run

python3(python) run_page/strava_sync.py ${client_id} ${client_secret} ${refresh_token}

References：

• https://developers.strava.com/docs/getting-started
• https://github.com/barrald/strava-uploader
• https://github.com/strava/go.strava

1. follow the strava steps
2. copy all your tcx files to TCX_OUT
3. Execute in the root directory:

python3(python) run_page/tcx_to_strava_sync.py ${client_id} ${client_secret}  ${strava_refresh_token}

example：

python3(python) run_page/tcx_to_strava_sync.py xxx xxx xxx
or
python3(python) run_page/tcx_to_strava_sync.py xxx xxx xxx --all

4. if you want to all files add args --all

1. follow the strava steps
2. copy all your gpx files to GPX_OUT
3. Execute in the root directory:

python3(python) run_page/gpx_to_strava_sync.py ${client_id} ${client_secret}  ${strava_refresh_token}

example：

python3(python) run_page/gpx_to_strava_sync.py xxx xxx xxx
or
python3(python) run_page/tcx_to_strava_sync.py xxx xxx xxx --all

4. if you want to all files add args --all

1. follow the nike and strava steps
2. Execute in the root directory:

python3(python) run_page/nike_to_strava_sync.py ${nike_refresh_token} ${client_id} ${client_secret} ${strava_refresh_token}

example：

python3(python) run_page/nike_to_strava_sync.py eyJhbGciThiMTItNGIw******  xxx xxx xxx

1. finish garmin and strava setup
2. Execute in the root directory:

python3(python) run_page/garmin_to_strava_sync.py  ${client_id} ${client_secret} ${strava_refresh_token} ${garmin_secret_string} --is-cn

e.g.

python3(python) run_page/garmin_to_strava_sync.py  xxx xxx xxx xx

1. finish garmin and strava setup, at the same time, you need to add additional strava config in Github Actions secret: secrets.STRAVA_EMAIL,secrets.STRAVA_PASSWORD
2. Execute in the root directory:

python3(python) run_page/strava_to_garmin_sync.py ${{ secrets.STRAVA_CLIENT_ID }} ${{ secrets.STRAVA_CLIENT_SECRET }} ${{ secrets.STRAVA_CLIENT_REFRESH_TOKEN }}  ${{ secrets.GARMIN_SECRET_STRING }} ${{ secrets.STRAVA_EMAIL }} ${{ secrets.STRAVA_PASSWORD }}

if your garmin account region is China, you need to execute the command:

python3(python) run_page/strava_to_garmin_sync.py ${{ secrets.STRAVA_CLIENT_ID }} ${{ secrets.STRAVA_CLIENT_SECRET }} ${{ secrets.STRAVA_CLIENT_REFRESH_TOKEN }}  ${{ secrets.GARMIN_SECRET_STRING_CN }} ${{ secrets.STRAVA_EMAIL }} ${{ secrets.STRAVA_PASSWORD }} --is-cn

If you want to add Garmin Device during sync, you should add --use_fake_garmin_device argument, this will add a Garmin Device (Garmin Forerunner 245 by default, and you can change device in garmin_device_adaptor.py) in synced Garmin workout record, this is essential when you want to sync the workout record to other APP like Keep, JoyRun etc.

the final command will be:

python3(python) run_page/strava_to_garmin_sync.py ${{ secrets.STRAVA_CLIENT_ID }} ${{ secrets.STRAVA_CLIENT_SECRET }} ${{ secrets.STRAVA_CLIENT_REFRESH_TOKEN }}  ${{ secrets.GARMIN_SECRET_STRING_CN }} ${{ secrets.STRAVA_EMAIL }} ${{ secrets.STRAVA_PASSWORD }} --use_fake_garmin_device

ps: when initializing for the first time, if you have a large amount of strava data, some data may fail to upload, just retry several times.

python run_page/coros_sync.py 'your coros account' 'your coros password'

• configure the COROS_ACCOUNT , COROS_PASSWORD

  

• Generate SVG data display
• Display of results:Click to view、Click to view

python run_page/gen_svg.py --from-db --title "${{ env.TITLE }}" --type github --athlete "${{ env.ATHLETE }}" --special-distance 10 --special-distance2 20 --special-color yellow --special-color2 red --output assets/github.svg --use-localtime --min-distance 0.5

python run_page/gen_svg.py --from-db --title "${{ env.TITLE_GRID }}" --type grid --athlete "${{ env.ATHLETE }}"  --output assets/grid.svg --min-distance 10.0 --special-color yellow --special-color2 red --special-distance 20 --special-distance2 40 --use-localtime

Generate year circular svg show

python3(python) run_page/gen_svg.py --from-db --type circular --use-localtime

For more display effects, see: https://github.com/flopp/GpxTrackPoster

1. vercel connects to your GitHub repo.

2. import repo

2. Awaiting completion of deployment
3. Visits

1. Login to Cloudflare dashboard.

2. Click Workers & Pages on the left side.

3. Click Create application and select Pages tab, connect your GitHub account and select running_page Repo, then click Begin setup.

4. Scroll down to Build settings, choose Create React App from Framework preset, and set Build output directory to dist.

5. Scroll down, click Environment variables (advanced), then add a variable like the below:

   Variable name = PYTHON_VERSION, Value = 3.7

6. Click Save and Deploy

1. Go to repository's Settings -> GitHub Pages -> Source, choose GitHub Actions

2. Go to the repository's Actions -> Workflows -> All Workflows, choose Run Data Sync from the left panel, and click Run workflow.

• The Run Data Sync will update data and then trigger the Publish GitHub Pages workflow
• Make sure the workflow runs without errors.

3. Open your website to check on the results

• note if the website doesn't reflect the latest data, please refresh it by F5.
• Some browsers (e.g. Chrome) won't refresh if there is a cache, you then need to use Ctrl+F5 (Windows) or Shift+Cmd+r (Mac) to force clearing the cache and reload the page.

4. make sure you have write permissions in Workflow permissions settings.

5. If you want to deploy your running_page to xxx.github.io instead of xxx.github.io/running_page or redirect your GitHub Pages to a custom domain, you need to do three things:

• Rename your forked running_page repository to xxx.github.io, where xxx is your GitHub username
• Modify the Build module in gh-pages.yml, remove ${{ github.event.repository.name }} and change to run: PATH_PREFIX=/ pnpm build
• In src/static/site-metadata.ts, set siteUrl: '' or your custom domain URL

Actions source code The following steps need to be taken

1. change to your app type and info

2. Add your secret in repo Settings > Secrets (add only the ones you need).

3. My secret is as follows

4. Go to repository's Settings -> Code and automation -> Actions ->General, Scroll to the bottom, find Workflow permissions, choose the first option Read and write permissions, click Save.

Take the keep app as an example. Close the app after running, and then automatically trigger Actions to update the data.

1. Get actions id (need to apply token)

curl https://api.github.com/repos/yihong0618/running_page/actions/workflows -H "Authorization: token d8xxxxxxxxxx" # change to your config

2. Binding shortcut instruction

   1. Get it via icloud running-page-shortcuts-template

   2. Modify the dictionary parameters in the following figure

   

3. Automation

When SAVE_DATA_IN_GITHUB_CACHE is set to true in the run_data_sync.yml file, the script can store fetched and intermediate data files in the GitHub Action Cache. This helps keep your GitHub commit history and directory clean.

If you are deploying using GitHub Pages, it is recommended to set this value to true, and set BUILD_GH_PAGES to true.