This layer is intended to enable FD.io/technology Vector Packet Processing (FD.io/technology and FD.io/view/VPP) on poky.
This layer depends on:
URI: git:https://git.yoctoproject.org/meta-dpdk
revision: HEAD
URI: git:https://git.yoctoproject.org/meta-intel
revision: HEAD
URI: git:https://git.openembedded.org/meta-openembedded/
revision: HEAD
layes: meta-oe
meta-python
meta-networking
You are solely responsible for determining the appropriateness of using or redistributing the above dependencies and assume any risks associated with your exercise of permissions under the license.
Maintainer: Babak Sarashki [email protected]
In order to enable FD.io VPP on a poky target, add this layer and its dependencies to conf/bblayers.conf. Append packagegroup- vpp to IMAGE_INSTALL and set MACHINE = "intel-corei7-64" in conf/local.conf
This script is inteded to setup virtual network between ns's on the host.
#!/bin/bash
map() {
cat << EOF
Source: https://wiki.fd.io/view/VPP/Tutorial_Routing_and_Switching
Setting up Virtual network Demo
2001:1::ffff/64 2001::ffff/64
10.0.10.1/24 10.0.0.10/24
+----------+ +---------------+ +----------------+ +--------------+
| Vpp Tap |------| Vpp Routing |------| Loopback intrf |------| VPP brdg Dmn |
+----------+ +---------------+ +----------------+ +--------------+
| |
| |
| |
| |
| +-----------------------+
| | |
| | |
| | |
| +----------------+ +----------------+
| | Host Interface | | Host Interface |
| | host-vpp1 | | host-vpp0 |
| +----------------+ +----------------+
| | |
| | |
| | |
+-------------+ +----------------+ +--------------+
| Tap 0 | | Vpp1 | | Vpp0 |
|2001:1::1/64 | | 2001::2/64 | | 2001::1/64 |
|10.0.1.1/24 | | 10.0.0.2/24 | | 10.0.0.1/24 |
| ns2 | | ns1 vethns1 | | ns0 vethns0 |
+-------------+ +----------------+ +--------------+
EOF
}
setup() {
# Add network namespace ns0
ip netns add ns0
ip netns add ns1
ip netns add ns2
# Add Virtual Ethernet devs
ip link add vpp0 type veth peer name vethns0
ip link add vpp1 type veth peer name vethns1
# Create tap device
vppctl tap connect ns2-tap0
vppctl set interface state tapcli-0 up
# Set tap and Veths to their netns
ip link set vethns0 netns ns0
ip link set vethns1 netns ns1
ip link set ns2-tap0 netns ns2
# Bring up lo devs
ip netns exec ns0 ip link set lo up
ip netns exec ns1 ip link set lo up
ip netns exec ns2 ip link set lo up
vppctl create loopback interface
vppctl set interface l2 bridge loop0 1 bvi
vppctl set interface state loop0 up
# Create host interrace
vppctl create host-interface name vpp0
vppctl create host-interface name vpp1
# Bridge the host interfaces
vppctl set interface l2 bridge host-vpp0 1
vppctl set interface l2 bridge host-vpp1 1
# Bring up the bridge
vppctl set interface state host-vpp0 up
vppctl set interface state host-vpp1 up
# Bring up vpp0 and vpp1
ip link set vpp0 up
ip link set vpp1 up
# vppctl show int
# Add addr
ip netns exec ns0 ip addr add 2001::1/64 dev vethns0
ip netns exec ns0 ip addr add 10.0.0.1/24 dev vethns0
ip netns exec ns0 ip link set vethns0 up
ip netns exec ns0 ethtool -K vethns0 rx off tx off >/dev/null
ip netns exec ns1 ip addr add 2001::2/64 dev vethns1
ip netns exec ns1 ip addr add 10.0.0.2/24 dev vethns1
ip netns exec ns1 ip link set vethns1 up
ip netns exec ns1 ethtool -K vethns1 rx off tx off > /dev/null
ip netns exec ns2 ip link set lo up
ip netns exec ns2 ip link set ns2-tap0 up
ip netns exec ns2 ip addr add 10.0.1.1/24 dev ns2-tap0
ip netns exec ns2 ip addr add 2001:1::1/64 dev ns2-tap0
vppctl set interface ip addr tapcli-0 2001:1::ffff/64
vppctl set interface ip addr tapcli-0 10.0.1.10/24
vppctl set interface ip address loop0 2001::ffff/64
vppctl set interface ip address loop0 10.0.0.10/24
ip netns exec ns0 ip route add default via 10.0.0.10
ip netns exec ns0 ip -6 route add default via 2001::ffff
ip netns exec ns1 ip route add default via 10.0.0.10
ip netns exec ns1 ip -6 route add default via 2001::ffff
ip netns exec ns2 ip route add default via 10.0.1.10
ip netns exec ns2 ip -6 route add default via 2001:1::ffff
}
cleanup () {
pkill -9 vpp
vpp -c /etc/vpp/startup.conf
ip netns del ns0
ip netns del ns1
ip netns del ns2
}
if [ $# -ne 1 ]; then
echo "usage: $0 <setup|cleanup|map>"
exit
fi
$1
All product names, logos, and brands are property of their respective owners. All company, product and service names used in this software are for identification purposes only. Wind River is a registered trademarks of Wind River Systems, Inc. Linux is a registered trademark of Linus Torvalds.
Disclaimer of Warranty / No Support: Wind River does not provide support and maintenance services for this software, under Wind River’s standard Software Support and Maintenance Agreement or otherwise. Unless required by applicable law, Wind River provides the software (and each contributor provides its contribution) on an “AS IS” BASIS, WITHOUT WARRANTIES OF ANY KIND, either express or implied, including, without limitation, any warranties of TITLE, NONINFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the software and assume any risks associated with your exercise of permissions under the license.