Here is simple program that uses Pickering ClientBridge C/C++ library.

Tested OS: Debian 10/amd64

• Ensure that git and build environment is installed using this command:

  sudo apt-get install build-essential git

• Download latest ClientBridge binary, for example:

  curl -O https://downloads.pickeringtest.info/downloads/drivers/Sys60/Linux/ClientBridge/Debian/ClientBridge-1.20.0.3-amd64.deb

• install downloaded binary:

  sudo dpkg -i ClientBridge-1.20.0.3-amd64.deb

• checkout and build this test program:

  git clone https://github.com/hpaluch-pil/test-cb.git
  cd test-cb
  make

To run this program you need target LXI device or LXI Simulator.

To test card on Bus=1 Slot=15 and LXI IP Address=192.168.10.38 you can use this command:

./TestCB 192.168.10.38 1 15

Example output from above command:

OK: Connected to '192.168.10.38:1024', SESSION=1587630255
OK: OpenSpecifiedCard at Bus=1, Slot=15. CardNum=1
OK: Card on Bus=1, Slot=15 has CardId='40-160-001,1000000,1.01'

• ClientBridge/C++ for Debian
• LXI Simulator