Skip to content

Sync a real Universal Robots robot with one in the V-REP robotics simulator.

License

Notifications You must be signed in to change notification settings

haploid/v_rep_ur_connect

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

27 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

V-REP UR Connect

This Lua code is meant to synchronize the state of a Universal Robots UR3, UR5, or UR10 in the V-REP robot simulator with a real robot.

Given the IP address of the robot this code will load a control program onto the robot's control system and then accept a connection back from the robot which is subsequently used to stream joint targets to the robot and receive the joint states from the robot.

Inside V-REP the script should be called from a threaded child script, like so:

local ur_connect = require('ur_connect')

function sysCall_threadmain()
  -- The scene contains a UR5 robot model named 'UR5'
  local robot = ur_connect.Robot(sim.getObjectHandle('UR5'), theRobotsIPAddress)

  -- Connecting causes the script to load the control program onto the robot system and accept
  -- a connection back from the robot for control
  robot:connect()

  while sim.getSimulationState() ~= sim.simulation_advancing_abouttostop do
    -- Servoing updates the joint targets for the real robot, causing it to move
    -- This should ideally be called very quickly (>100 Hz) at regular intervals, and match the
    -- tuning parameters in the servoj call of the robot control script
    robot:servo_to(robot:get_joint_angles())
  end

  -- Cleans up the network resources
  robot:disconnect()
end

Installation

The ur_connect directory is the Lua module for connecting V-REP to a UR robot. Lua modules are installed in V-REP by putting them in the same directory as the main application binary. On macOS that's /Applications/V-REP_version_and_stuff/vrep.app/Contents/MacOS. Copy the ur_connect directory there.

The module uses the BitOp library so that will need to be installed too. Make sure to compile it for Lua 5.1 because that's the version of Lua used by V-REP. To compile BitOp do the following (on macOS):

  1. Install Homebrew.
  2. Install Lua 5.1 with brew install [email protected].
  3. Download LuaBitOp-1.0.2.zip and unzip.
  4. Compile with: a. gcc -I/usr/local/include/lua5.1 -dynamiclib -single_module -undefined dynamic_lookup -o bit.o bit.c b. gcc -shared -fPIC -I/usr/local/include/lua5.1 -llua5.1 -o bit.so bit.o
  5. Copy the resulting bit.so to the aforementioned V-REP directory.

Documentation

Generate by running make docs. LDoc must be installed.

Run tests with make test.