RVMP (RTCM-VIA-MQTT-PROTOCOL) V0.3 (first very basic approach, but some features for future are in preperation). (GNU GPL V3)

In use by RVMT (RTCM Via MQTT Transmitter - https://github.com/hagre/RVMT_RTCM-VIA-MQTT-TRANSMITTER) using the MQTT msg/protocol (as a secure and opensource alternative to NTRIP) to get RTK correction data from BaseStations to Broker and to Rover GPS units.

Caster is/will be on https://github.com/hagre/RVMT_RTCM-VIA-MQTT-CASTER

Basicly, this is a try to implement something like a NTRIP caster with MQTT features. There are a lot of similarities to NTRIP (V1.0/V2.0), because it is a known and usefull protocol with most needed features for this task.

Attension: Topics are casesensitive!!

The basic system setup can be:

For most users with 1 Base and 1 or more Rovers -----------------> My focus until V2.0

1.) Base (Transmitter) - via MQTT - Broker/Server - via MQTT - Client/Receiver/Rover

For users with more than 1 Base and different "customers" with lots of rovers (accountmanagement) -----------------> Not until V2.0

2.) Base (Transmitter) - via MQTT - Broker/Server - via MQTT - Caster (Relaying/managing the Topics) - via MQTT - Client/Receiver/Rover

• Basestation(s) is/are publishing to MQTT broker (RTK/Base/...) and deliver basic information

• Basestationen are continuosly evaluating the RTCM input and presenting the avaliable feature (incl update if something new,..)

• Clients can connect to the broker (user/password protected and TLS)

• Clients can select to subscribe to the required RTCM msg from the desired RTK/Base/...

• Clients can switch off publishing of the Basestations publishing RTCM (maintaining in STBY) if the last client has closed the subscription.

Welcome msg: (transmitted when a new connection is established, or a feature is updated, .. )

• RTK/Base/(NAME of BASE)/Status/FirmwareVer - e.g "2.2" - Version of transmitter firmware [QOS = 1, retain = true] [read acces by client app, read/write by Basestation ]
• RTK/Base/(NAME of BASE)/Status/ProtocolVer - e.g "0.1" - Version of protocol [QOS = 1, retain = true] [read acces by clent, read/write by Basestation ]
• RTK/Base/(NAME of BASE)/Status/RTCM/(TYPE of MSG) - e.g "1", "0.5" or "30" - time in seconds between update (~frequenz) [QOS = 1, retain = true] [read acces by clent, read/write by Basestation ]
• RTK/Base/(NAME of BASE)/Status/Operation - "ONLINE" full working RTCM, "STBY" receiving RTCM, but not transmitting over MQTT, "ERROR" having some trouble (not reveiving RTCM) [QOS = 1, retain = true, last_will = "OFFLINE"] [read acces by clent, read/write by Basestation ]

for each RTCM msg type:

• RTK/Base/NAME of BASE/RTCM/ [retain = false] [read acces by client, read/write by Basestation ]

• RTK/Base/(NAME of BASE)/Command/In/Transmitter

• NIL

• RTK/Base/(NAME of Base)/Status/Operation - check operation of desired Base
• RTK/Base/(NAME of Base)/RTCM/# - get all RTCM msg avaliable or
• RTK/Base/(NAME of Base)/RTCM/(TYPE of MSG) - just for each desired msg type

• NIL

• RTK/Base/(NAME of BASE)/Command/In/Transmitter - "ON" or "OFF" to activate/deactivate RTCM transmission [retain = false]

• (NAME of BASE)- e.g. XYZ01
• (TYPE of MSG) - e.g. 1074

• add PW acces for Basestation (if required at all)

• add a special client ID (user "BaseMaintenance") for mantenance my basestations with serial com

• Caster setup

in far future

• RTK/User/Subscribe/(NAME of USER)/Position/
• and construckt/calculate virtual basestation on user request for user position - give virtual name MNTP and publish accordingly