View Chinese description | 查看中文说明

Armbian is a lightweight Linux system specially built for ARM chips based on Debian/Ubuntu. The Armbian system is lean, clean, and 100% compatible with and inherits the features and rich software ecosystem of the Debian/Ubuntu system. It can run securely and stably in TF/SD/USB and the device's eMMC. This project preserves the integrity of the official Armbian system and further expands its usage on devices such as TV boxes that are not officially supported. It adds some convenient operation commands. Now, you can replace the Android TV system on your TV box with the Armbian system, turning it into a powerful server.

This project relies on many contributors to build the Armbian system for Amlogic, Rockchip, and Allwinner boxes, supports writing to eMMC for use, supports updating the kernel and other features. Detailed usage can be found in the Armbian User Documentation. The latest Armbian system can be downloaded from Releases. Welcome to Fork and personalize. If it's useful to you, you can click Star in the upper right corner of the repository to show support.

Choose the Armbian system that corresponds to your box model, and refer to the corresponding instructions for different devices.

• Install Armbian to EMMC

1. For Rockchip platform, please refer to the Chapter 8 in the instruction document.

2. For Amlogic and Allwinner platforms, use tools such as Rufus or balenaEtcher to write the system to a USB stick, then insert the USB stick with the written system into the box. Log in to the Armbian system (default user: root, default password: 1234) → Enter the command:

armbian-install

Example: armbian-install -m yes -a no

• Update Armbian Kernel

Log in to the Armbian system → Enter the command:

# Run as root user (sudo -i)
# If no parameter is specified, it will be updated to the latest version.
armbian-update

Example: armbian-update -k 5.15.50 -u dev

When specifying the kernel version number through the -k parameter, you can accurately specify a specific version number, for example: armbian-update -k 5.15.50, or you can specify the kernel series vaguely, for example: armbian-update -k 5.15. When vaguely specified, the latest version of the specified series will be automatically used.

When updating the kernel, the currently used kernel will be automatically backed up and stored in the /ddbr/backup directory. The backup keeps the three most recent versions of the kernel. If the newly installed kernel is unstable, you can easily restore the backup kernel at any time. If the kernel update fails and the system cannot boot, you can restore the system kernel using armbian-update -s. For more details, see the Help Document.

• Install Common Software

Log in to the Armbian system → Enter the command:

armbian-software

The command armbian-software -u can update the local software center list. Based on the demand feedback from users in Issue, we gradually integrate commonly used software to achieve one-click installation/update/uninstallation and other shortcut operations. This includes docker images, desktop software, application services, etc. For more details, see the instructions.

• Modify Armbian Configuration

Log in to the Armbian system → Enter the command:

armbian-config

• Create swap for Armbian

If you feel that the current box's memory is insufficient when using applications that consume a lot of memory, such as docker, you can create a swap virtual memory partition, virtually using a certain capacity of disk space as memory. The unit of the input parameter of the following command is GB, the default is 1.

Log in to the Armbian system → Enter the command:

armbian-swap 1

• Control LED Display

Log in to the Armbian system → Enter the command:

armbian-openvfd

Debug according to the LED Screen Display Control Instructions.

• Backup/Restore EMMC Original System

Supports backing up/restoring the EMMC partition of the box in TF/SD/USB. Before installing the Armbian system in a brand new box, it is recommended that you back up the Android TV system that comes with the current box so that it can be used in the future to restore the TV system and other situations.

Please boot the Armbian system from TF/SD/USB → Enter the command:

armbian-ddbr

Enter b according to the prompt to back up the system, and enter r to restore the system.

• Compile the Kernel in Armbian

For the usage of compiling the kernel in Armbian, please refer to the Compile Kernel instruction document. Log in to the Armbian system → Enter the command:

armbian-kernel -u
armbian-kernel -k 6.6.12

• More Usage Instructions

To update all service scripts in the local system to the latest version, you can log in to the Armbian system → Enter the command:

armbian-sync

In the use of Armbian, some common problems that may be encountered can be found in documents

1. Clone the repository to local git clone --depth 1 https://github.com/ophub/amlogic-s9xxx-armbian.git

2. Install the necessary software packages (scripts have only been tested under x86_64 Ubuntu-20.04/22.04)

sudo apt-get update -y
sudo apt-get full-upgrade -y
# For Ubuntu-22.04
sudo apt-get install -y $(cat compile-kernel/tools/script/ubuntu2204-build-armbian-depends)

3. Enter the ~/amlogic-s9xxx-armbian root directory, create a build/output/images folder in the root directory, and upload the Armbian image file (such as Armbian_21.11.0-trunk_Odroidn2_current_5.15.50.img) to ~/amlogic-s9xxx-armbian/build/output/images directory. Please keep the release version number (such as 21.11.0) and the kernel version number (such as 5.15.50) in the original Armbian image file name. It will be used as the name of the Armbian system after restructuring.

4. Enter the ~/amlogic-s9xxx-armbian root directory, and then run the sudo ./rebuild -b s905x3 -k 6.6.12 command to generate the Armbian image file for the specified board. The generated file is saved in the build/output/images directory.

• Local Packaging Parameter Description

• sudo ./rebuild: Use the default configuration to package all models of TV boxes.
• sudo ./rebuild -b s905x3 -k 6.6.12: Recommended. Use the default configuration to package related kernels.
• sudo ./rebuild -b s905x3_s905d -k 6.6.12_5.15.50: Use the default configuration, package multiple kernels at the same time. Use _ to connect multiple kernel parameters.
• sudo ./rebuild -b s905x3 -k 6.6.12 -s 2560: Use the default configuration, specify a kernel, a model for packaging, the system size is set to 2560MiB.
• sudo ./rebuild -b s905x3_s905d Use the default configuration, package all kernels for multiple models of TV boxes, use _ to connect multiple models.
• sudo ./rebuild -k 6.6.12_5.15.50: Use the default configuration, specify multiple kernels, and package all models of TV boxes, the kernel package uses _ for connection.
• sudo ./rebuild -k 6.6.12_5.15.50 -a true: Use the default configuration, specify multiple kernels, and package all models of TV boxes, the kernel package uses _ for connection. Automatically upgrade to the latest kernel of the same series.
• sudo ./rebuild -t btrfs -s 2560 -k 6.6.12: Use the default configuration, set the file system to btrfs format, the partition size is 2560MiB, and specify the kernel as 6.6.12, package for all models of TV boxes.

1. The configuration of the Workflows file can be found in the build-armbian.yml file.

2. Full compile: On the Actions page, select Build armbian. According to the OS versions supported by Armbian official, you can choose the Ubuntu series: jammy, or the Debian series: bullseye etc. Click the Run workflow button to compile. More parameter setting methods can be found in the Armbian official documentation.

3. Recompile: If there are already compiled Armbian_.*-trunk_.*.img.gz files in Releases, and you just want to make another box of different boards, you can skip the compilation of Armbian source files and proceed with the second production directly. On the Actions page, select Use Releases file to build armbian, and click the Run workflow button to compile again.

4. Use other Armbian systems, such as the odroidn2 system provided by the Armbian official system download website armbian.tnahosting.net, and only introduce the script of this repository in the process control file rebuild-armbian.yml to restructure Armbian, which can be adapted to the use of other boxes. On the Actions page, select Rebuild armbian, input the network download address of Armbian like https://dl.armbian.com/*/Armbian_*.img.xz, or set the loading path of the restructuring file in the process control file rebuild-armbian.yml through the armbian_path parameter. The code is as follows:

- name: Rebuild Armbian
  uses: ophub/amlogic-s9xxx-armbian@main
  with:
    build_target: armbian
    armbian_path: build/output/images/*.img
    armbian_board: s905d_s905x3_s922x_s905x
    armbian_kernel: 6.6.12_5.15.50

• GitHub Actions Input Parameter Description

The related parameters correspond to the local packaging command, please refer to the above description.

• GitHub Actions Output Variable Description

To upload to Releases, you need to add ${{ secrets.GITHUB_TOKEN }} and ${{ secrets.GH_TOKEN }} to the repository and set Workflow read/write permissions. For details, see the usage instructions.

For the method of compiling the kernel, refer to compile-kernel

- name: Compile the kernel
  uses: ophub/amlogic-s9xxx-armbian@main
  with:
    build_target: kernel
    kernel_version: 5.15.1_6.1.1
    kernel_auto: true
    kernel_sign: -yourname

First of all, thanks to 150balbes for the outstanding contributions and the solid foundation laid for using Armbian in Amlogic TV boxes. The Armbian system compiled here directly uses the latest source code from the official in real-time. The development ideas of the program come from tutorials from authors such as ebkso. Thank you all for your dedication and sharing, allowing us to use the Armbian system in more boxes.

The u-boot, kernel and other resources used in this system are mainly copied from the unifreq/openwrt_packit project, and some files are provided by users in Pull and Issues of projects such as amlogic-s9xxx-openwrt, amlogic-s9xxx-armbian, luci-app-amlogic, u-boot and kernel. To thank these pioneers and sharers, from now on (this source code repository was created on 2021-09-19), I have recorded it uniformly in CONTRIBUTORS.md. Thanks again to everyone for giving the box a new life and meaning.

• The amlogic-s9xxx-openwrt project provides the OpenWrt system used in the box, which is also applicable to devices that support Armbian.
• unifreq has made OpenWrt system for more boxes such as Amlogic, Rockchip, and Allwinner, which is a benchmark in the box circle and recommended to use.
• Scirese tested the production, installation, and use of Arch Linux ARM / Manjaro system in Android TV boxes, for details refer to the relevant instructions in his repository.
• 7Ji has published some articles on reverse engineering and development on the Amlogic platform in his blog, such as installing the ArchLinux ARM system in the way of ArchLinux, an introduction to the boot mechanism of the Amlogic platform, etc. In his ampart project, a partition tool is provided that can read and edit the Amlogic eMMC partition table and DTB internal partition, and can utilize 100% of eMMC space. The amlogic-s9xxx-archlinuxarm project provides the production and use method of Arch Linux ARM system. In the YAopenvfD project, another openvfd daemon is provided.
• 13584452567 is the pioneer for the Rockchip series of devices in this repository, having expanded support for numerous Rockchip devices like EAIDK-610, King3399, TN3399, Kylin3399, ZCube1-Max, tvi3315a, xiaobao and more, thanks to his sharing. Additionally, he remains the maintainer of specialized kernels for Allwinner devices like TQC-A01. Having provided a wealth of tech support and solutions within Discussions and Issues sections, he's made significant contributions to the development of the box circle.

• armbian
• unifreq
• kernel.org

The amlogic-s9xxx-armbian © OPHUB is licensed under GPL-2.0