Skip to content

guiaugustoga987/tello-driver-ros

 
 

Repository files navigation

Tello ROS driver

ROS driver used in the course DTEK0081 Perception and Navigation in Robotics

Installation

We will use by default the same workspace as for the drone-racing repo: https://github.com/TIERS/drone-racing.

If you don't have it, create the workspace and clone this repo

mkdir -p  ~/drone_racing_ws/src && cd ~/drone_racing_ws/src
git clone --recursive https://github.com/TIERS/tello-driver-ros.git

Install dependencies

sudo apt install ros-melodic-camera-info-manager-py ros-melodic-codec-image-transport python-catkin-tools python3-dev python3-pip python-dev python-pip
sudo -H pip3 install --upgrade pip
sudo -H pip3 install https://github.com/damiafuentes/DJITelloPy/archive/master.zip

And build it

cd ~/drone_racing_ws
catkin init
catkin build

Launch for Tello with its own Wi-Fi AP

  • Turn on Tello drone
  • Connect to drone's WiFi access point (TELLO_XXXXXX)

Then launch the driver

source ~/drone_racing_ws/devel/setup.bash
roslaunch tello_driver tello_node.launch tello_ip:="192.168.10.1"

You can control it with the teleop_twist_keyboard node. Install it with

sudo apt install ros-melodic-teleop-twist-keyboard

and run it

rosrun teleop_twist_keyboard teleop_twist_keyboard.py cmd_vel:=/tello/cmd_vel

Launch for Tello Edo connected to same Wi-Fi network

  • Turn on Tello EDU drone
  • Check IP (for the course, they are written on top of the drone)

Then launch the driver modifying the IP

source ~/drone_racing_ws/devel/setup.bash
roslaunch tello_driver tello_node.launch tello_ip:="192.168.XXX.XXX"

ROS Nodes

Subscribed topics

Published topics

Parameters

  • ~/tello_driver_node/connect_timeout_sec
  • ~/tello_driver_node/fixed_video_rate
  • ~/tello_driver_node/local_cmd_client_port
  • ~/tello_driver_node/local_vid_server_port
  • ~/tello_driver_node/stream_h264_video
  • ~/tello_driver_node/tello_cmd_server_port
  • ~/tello_driver_node/tello_ip
  • ~/tello_driver_node/vel_cmd_scale
  • ~/tello_driver_node/video_req_sps_hz
  • ~/tello_driver_node/altitude_limit
  • ~/tello_driver_node/attitude_limit
  • ~/tello_driver_node/low_bat_threshold

Contact

For any questions, write to [email protected].

Visit us at https://tiers.utu.fi

About

ROS driver for DJI/Ryze Tello drones

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 84.1%
  • CMake 14.1%
  • C++ 1.8%