PhoenixGo is a Go AI program which implements the AlphaGo Zero paper "Mastering the game of Go without human knowledge". It is also known as "BensonDarr" in FoxGo, "cronus" in CGOS, and the champion of "World AI Go Tournament 2018" held in Fuzhou China.

If you use PhoenixGo in your project, please consider mentioning in your README.

If you use PhoenixGo in your research, please consider citing the library as follows:

@misc{PhoenixGo2018,
  author = {Qinsong Zeng and Jianchang Zhang and Zhanpeng Zeng and Yongsheng Li and Ming Chen and Sifan Liu}
  title = {PhoenixGo},
  year = {2018},
  journal = {GitHub repository},
  howpublished = {\url{https://github.com/Tencent/PhoenixGo}}
}

• GCC with C++11 support
• Bazel (0.11.1 is known-good)
• (Optional) CUDA and cuDNN (for GPU support)
• (Optional) TensorRT (for accelerating computation on GPU, 3.0.4 is known-good)

Clone the repository and configure the building:

$ git clone https://github.com/Tencent/PhoenixGo.git
$ cd PhoenixGo
$ ./configure

./configure will ask where CUDA and TensorRT have been installed, specify them if need.

Then build with bazel:

$ bazel build //mcts:mcts_main

Dependices such as Tensorflow will be downloaded automatically. The building prosess may take a long time.

Download and extract the trained network, then run:

$ wget https://github.com/Tencent/PhoenixGo/releases/download/trained-network-20b-v1/trained-network-20b-v1.tar.gz
$ tar xvzf trained-network-20b-v1.tar.gz
$ scripts/start.sh

start.sh will detect the number of GPUs, run mcts_main with proper config file, and write log files in directory log. You could also use a customized config by running scripts/start.sh {config_path}. See also #configure-guide.

Furthermore, if you want to fully control all the options of mcts_main (such as, changing log destination), you could also run bazel-bin/mcts/mcts_main directly. See also #command-line-options.

The engine supports the GTP protocol, means it could be used with a GUI with GTP capability, such as Sabaki.

PhoenixGo support running with distributed workers, if there are GPUs on different machine.

Build the distribute worker:

$ bazel build //dist:dist_zero_model_server

Run dist_zero_model_server on distributed worker, one for each GPU.

$ CUDA_VISIBLE_DEVICES={gpu} bazel-bin/dist/dist_zero_model_server --server_address="0.0.0.0:{port}" --logtostderr

Fill ip:port of workers in the config file (etc/mcts_dist.conf is an example config for 32 workers), and run the distributed master:

$ scripts/start.sh etc/mcts_dist.conf

Note: Tensorflow stop providing GPU support on macOS since 1.2.0, so you are only able to run on CPU.

Download and extract https://github.com/Tencent/PhoenixGo/releases/download/mac-x64-cpuonly-v1/PhoenixGo-mac-x64-cpuonly-v1.tgz

Follow the document: using_phoenixgo_on_mac.pdf

Same as Linux.

Download and extract https://github.com/Tencent/PhoenixGo/releases/download/win-x64-gpu-v1/PhoenixGo-win-x64-gpu-v1.zip

Or CPU-only version https://github.com/Tencent/PhoenixGo/releases/download/win-x64-cpuonly-v1/PhoenixGo-win-x64-cpuonly-v1.zip

Follow the document: how to install phoenixgo.pdf

Here are some important options in the config file:

• num_eval_threads: should equal to the number of GPUs
• num_search_threads: should a bit larger than num_eval_threads * eval_batch_size
• timeout_ms_per_step: how many time will used for each move
• max_simulations_per_step: how many simulations will do for each move
• gpu_list: use which GPUs, separated by comma
• model_config -> train_dir: directory where trained network stored
• model_config -> checkpoint_path: use which checkpoint, get from train_dir/checkpoint if not set
• model_config -> enable_tensorrt: use TensorRT or not
• model_config -> tensorrt_model_path: use which TensorRT model, if enable_tensorrt
• max_search_tree_size: the maximum number of tree nodes, change it depends on memory size
• max_children_per_node: the maximum children of each node, change it depends on memory size
• enable_background_search: pondering in opponent's time
• early_stop: genmove may return before timeout_ms_per_step, if the result would not change any more
• unstable_overtime: think timeout_ms_per_step * time_factor more if the result still unstable
• behind_overtime: think timeout_ms_per_step * time_factor more if winrate less than act_threshold

Options for distribute mode:

• enable_dist: enable distribute mode
• dist_svr_addrs: ip:port of distributed workers, multiple lines, one ip:port in each line
• dist_config -> timeout_ms: RPC timeout

Options for async distribute mode:

Async mode is used when there are huge number of distributed workers (more than 200), which need too many eval threads and search threads in sync mode. etc/mcts_async_dist.conf is an example config for 256 workers.

• enable_async: enable async mode
• enable_dist: enable distribute mode
• dist_svr_addrs: multiple lines, comma sperated lists of ip:port for each line
• num_eval_threads: should equal to number of dist_svr_addrs lines
• eval_task_queue_size: tunning depend on number of distribute workers
• num_search_threads: tunning depend on number of distribute workers

Read mcts/mcts_config.proto for more config options.

mcts_main accept options from command line:

• --config_path: path of config file
• --gtp: run as a GTP engine, if disable, gen next move only
• --init_moves: initial moves on the go board
• --gpu_list: override gpu_list in config file
• --listen_port: work with --gtp, run gtp engine on port in TCP protocol
• --allow_ip: work with --listen_port, list of client ip allowed to connect
• --fork_per_request: work with --listen_port, fork for each request or not

Glog options are also supported:

• --logtostderr: log message to stderr
• --log_dir: log to files in this directory
• --minloglevel: log level, 0 - INFO, 1 - WARNING, 2 - ERROR
• --v: verbose log, --v=1 for turning on some debug log, --v=0 to turning off

mcts_main --help for more command line options.

1. Where is the win rate?

Print in the log, something like:

I0514 12:51:32.724236 14467 mcts_engine.cc:157] 1th move(b): dp, winrate=44.110905%, N=654, Q=-0.117782, p=0.079232, v=-0.116534, cost 39042.679688ms, sims=7132, height=11, avg_height=5.782244, global_step=639200

2. There are too much log.

Passing --v=0 to mcts_main will turn off many debug log. Moreover, --minloglevel=1 and --minloglevel=2 could disable INFO log and WARNING log.

Or, if you just don't want to log to stderr, replace --logtostderr to --log_dir={log_dir}, then you could read your log from {log_dir}/mcts_main.INFO.

3. How to run with Sabaki?

Setting GTP engine in Sabaki's menu: Engines -> Manage Engines, fill Path with path of start.sh. Click Engines -> Attach to use the engine in your game. See also #22.

4. How make PhoenixGo think with longer/shorter time?

Modify timeout_ms_per_step in your config file.

5. How make PhoenixGo think with constant time per move?

Modify your config file. early_stop, unstable_overtime, behind_overtime and time_control are options that affect the search time, remove them if exist then each move will cost constant time/simulations.

6. GTP command time_settings doesn't work.

Add these lines in your config:

time_control {
    enable: 1
    c_denom: 20
    c_maxply: 40
    reserved_time: 1.0
}

c_denom and c_maxply are parameters for deciding how to use the "main time". reserved_time is how many seconds should reserved (for network latency) in "byo-yomi time".

7. Syntax error (Windows)

For windows,

• in config file,

you need to write path with / and not \ in the config file .conf,

for example :

model_config {
      train_dir: "c:/users/amd2018/Downloads/PhoenixGo/ckpt"

• in cmd.exe,

Here you need to write paths with \ and not /. Also command format on windows needs a space and not a =, for example :

mcts_main.exe --gtp --config_path C:\Users\amd2018\Downloads\PhoenixGo\etc\mcts_1gpu_notensorrt.conf

See point 8. below :

8. '"ckpt/zero.ckpt-20b-v1.FP32.PLAN"' error: No such file or directory

This fix works for all systems : Linux, Mac, Windows, only the name of the ckpt file changes. Modify your config file and write the full path of your ckpt folder, for example for linux :

model_config {
    train_dir: "/home/amd2018/PhoenixGo/ckpt"

for example, for windows :

model_config {
    train_dir: "c:/users/amd2018/Downloads/PhoenixGo/ckpt"

9. Path errors during bazel configure

See https://github.com/Tencent/PhoenixGo/wiki/Install-cuda-and-do-bazel-configuration