[Feature Request] Turning off base emissions in GCHP fails

[lizziel]

I just ran into this issue so am making a note of it to look at later. I think turning off base emissions is primarily useful for GCST testing so am putting this issue here rather than the main GEOS-Chem repo.

The model crashes when running GCHP benchmark simulation with base emissions turned off within runConfig.sh. This is the end of the log:

 --- Do emissions now
HEMCO (VOLCANO): Opening /n/holyscratch01/external_repos/GEOS-CHEM/gcgrid/gcdata/ExtData/HEMCO/VOLCANO/v2021-09/so2_volcanic_emissions_CARN_v202005.degassing_only.rc
 
HEMCO ERROR [0005]: Cannot find in EmisList: DMS_SEAWATER
 --> LOCATION: HCO_EvalFld_2d (HCO_calc_mod.F90)
 
HEMCO ERROR [0005]: ERROR 1
 --> LOCATION: HCOX_SeaFlux_Run (HCOX_SEAFLUX_MOD.F90)
 
HEMCO ERROR [0005]: Error encountered in "HCOX_SeaFlux_Run"!
 --> LOCATION:  -> at HCOX_RUN (in module HEMCO/Extensions/hcox_driver_mod.F90
 
GEOS-Chem ERROR [0005]: Error encountered in "HCOX_Run"!
 --> LOCATION:  -> at HCOI_GC_Run (in module GeosCore/hco_interface_gc_mod.F90)
 
GEOS-Chem ERROR [0005]: Error encountered in "HCOI_GC_Run"!
 --> LOCATION:  -> at Emissions_Run (in module GeosCore/emissions_mod.F90)
 
HEMCO ERROR [0001]: Cannot find in EmisList: DMS_SEAWATER
 --> LOCATION: HCO_EvalFld_2d (HCO_calc_mod.F90)
 
HEMCO ERROR [0001]: ERROR 1
 --> LOCATION: HCOX_SeaFlux_Run (HCOX_SEAFLUX_MOD.F90)
 
HEMCO ERROR [0001]: Error encountered in "HCOX_SeaFlux_Run"!
 --> LOCATION:  -> at HCOX_RUN (in module HEMCO/Extensions/hcox_driver_mod.F90
 
GEOS-Chem ERROR [0001]: Error encountered in "HCOX_Run"!
 --> LOCATION:  -> at HCOI_GC_Run (in module GeosCore/hco_interface_gc_mod.F90)
 
GEOS-Chem ERROR [0001]: Error encountered in "HCOI_GC_Run"!
 --> LOCATION:  -> at Emissions_Run (in module GeosCore/emissions_mod.F90)
 
HEMCO ERROR [0000]: Cannot find in EmisList: DMS_SEAWATER
 --> LOCATION: HCO_EvalFld_2d (HCO_calc_mod.F90)
 
HEMCO ERROR [0000]: ERROR 1
 --> LOCATION: HCOX_SeaFlux_Run (HCOX_SEAFLUX_MOD.F90)
 
HEMCO ERROR [0000]: Error encountered in "HCOX_SeaFlux_Run"!
 --> LOCATION:  -> at HCOX_RUN (in module HEMCO/Extensions/hcox_driver_mod.F90
 
GEOS-Chem ERROR [0000]: Error encountered in "HCOX_Run"!
 --> LOCATION:  -> at HCOI_GC_Run (in module GeosCore/hco_interface_gc_mod.F90)
 
HEMCO ERROR [0003]: Cannot find in EmisList: DMS_SEAWATER
 --> LOCATION: HCO_EvalFld_2d (HCO_calc_mod.F90)
 
HEMCO ERROR [0003]: ERROR 1
 --> LOCATION: HCOX_SeaFlux_Run (HCOX_SEAFLUX_MOD.F90)
 
HEMCO ERROR [0003]: Error encountered in "HCOX_SeaFlux_Run"!
 --> LOCATION:  -> at HCOX_RUN (in module HEMCO/Extensions/hcox_driver_mod.F90
 
GEOS-Chem ERROR [0003]: Error encountered in "HCOX_Run"!
 --> LOCATION:  -> at HCOI_GC_Run (in module GeosCore/hco_interface_gc_mod.F90)
 
GEOS-Chem ERROR [0003]: Error encountered in "HCOI_GC_Run"!
 --> LOCATION:  -> at Emissions_Run (in module GeosCore/emissions_mod.F90)
 
HEMCO ERROR [0004]: Cannot find in EmisList: DMS_SEAWATER
 --> LOCATION: HCO_EvalFld_2d (HCO_calc_mod.F90)
 
HEMCO ERROR [0004]: ERROR 1
 --> LOCATION: HCOX_SeaFlux_Run (HCOX_SEAFLUX_MOD.F90)
 
HEMCO ERROR [0004]: Error encountered in "HCOX_SeaFlux_Run"!
 --> LOCATION:  -> at HCOX_RUN (in module HEMCO/Extensions/hcox_driver_mod.F90
 
GEOS-Chem ERROR [0004]: Error encountered in "HCOX_Run"!
 --> LOCATION:  -> at HCOI_GC_Run (in module GeosCore/hco_interface_gc_mod.F90)
 
GEOS-Chem ERROR [0004]: Error encountered in "HCOI_GC_Run"!
 --> LOCATION:  -> at Emissions_Run (in module GeosCore/emissions_mod.F90)
 
GEOS-Chem ERROR [0000]: Error encountered in "HCOI_GC_Run"!
 --> LOCATION:  -> at Emissions_Run (in module GeosCore/emissions_mod.F90)
 
HEMCO ERROR [0002]: Cannot find in EmisList: DMS_SEAWATER
 --> LOCATION: HCO_EvalFld_2d (HCO_calc_mod.F90)
 
HEMCO ERROR [0002]: ERROR 1
 --> LOCATION: HCOX_SeaFlux_Run (HCOX_SEAFLUX_MOD.F90)
 
HEMCO ERROR [0002]: Error encountered in "HCOX_SeaFlux_Run"!
 --> LOCATION:  -> at HCOX_RUN (in module HEMCO/Extensions/hcox_driver_mod.F90
 
GEOS-Chem ERROR [0002]: Error encountered in "HCOX_Run"!
 --> LOCATION:  -> at HCOI_GC_Run (in module GeosCore/hco_interface_gc_mod.F90)
 
GEOS-Chem ERROR [0002]: Error encountered in "HCOI_GC_Run"!
 --> LOCATION:  -> at Emissions_Run (in module GeosCore/emissions_mod.F90)
===> Run ended at Wed Feb 9 09:21:20 EST 2022

I have not tested in GC-Classic.

[yantosca]

@lizzlel: We should retest this now that we have updated HEMCO to turn off emissions and emission extensions.

[lizziel]

Agreed. @msulprizio, did you already test this? Is there a PR related to this?

[lizziel]

Ah, found it! geoschem/HEMCO#250

[msulprizio]

@lizziel I verified the fix passes integration tests for both GCClassic and GCHP, but those integration tests do not have emissions turned off. I only validated that the fix worked as expected when turning emissions off for GCClassic.

[lizziel]

I verified the above mentioned PR fixes this issue for GCHP.