Skip to content

frehberg/wasm-sign

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

7 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

WebAssembly Module Signature

This repository describing the design and high-level overview of the WebAssembly Module Signature (WAMS)

Overview

The WebAssembly Module Signature shall proof authenticity and integrity of the WebAssembly module, as file or parsed.

Requirements

The WebAssembly Module Signature shall provide the following features

  • It shall be possible to sign a WebAssembly Module file without parsing
  • The signature signs the serialized, binary form of data in rest and data in transit.
  • A module shall be signed as is, completely, including all custom-sections.
  • The module sections shall not be re-ordered to meet a canonical form.
  • All module signatures shall have equal byte-size.
  • It shall be possible to verify a signature without parsing of the module
  • It shall be possible with simple tools to split a WebAssembly module into both parts, the signature and the signed content
  • Signatures shall use the ECDSA algorithm with SHA256.
  • The public key may be publicly available and may be distributed using DNS-TXT-Records.

Proposal

  • The WebAssembly module signature is a Custom-Section with type id 0, the section name must be formed by 9 characters, so all signatures have equal byte-size
  • A module shall contain just one signature (may be extended in future)
  • A signature signs all sections of the module, as is.
  • The custom-section with name "signature" (9 chars) is the default signature.
  • The payload of the custom-section contains the ECDSA signature; the complete section has octet-size 118.
  • New signature-sections shall be appended to the end of a module only.
  • Removing the last 118 bytes from a module-bytecode, the signature-section is cut off.
  • The tool shall support secp256k1 in initial version and in future versions Ed25519 and secp384r1 (hence the reserved bytes at end)

Each signature section ist formed of a sequence of 118 octets:

Fields Bytes
Section Type (Custom): 0
Section Size: 116
Section Name Length: 9
Section Name Octets [9]: [115, 105, 103, 110, 97, 116, 117, 114, 101] (read as "signature")
Signature Type : 0 which stands for ECDSA/SHA256 with max digest length of max. 72 bytes
Signature length: Single byte value 72 or less
Signature: [...]
Padding bytes: 0..33 padding bytes filling extending the digest-length to up to 104 bytes (secp384r1)

The signature is always attached to the end of a WASM-file. If receiving a signed WASM-file, the last 118 characters can be cut off to get the WASM-Signature section. The following indeces permit verification of the signature using command line tools or Javascript, without the need to parse the WASM-module-bytecodes:

  • Index 0..11 Fixed byte-sequence [0, 116, 9, 115, 105, 103, 110, 97, 116, 117, 114, 101]
  • Index 12 SIGNATURE_TYPE (the only valid value is '0' for curve secp256k1/SHA256 for now)
  • Index 13 DIGEST_DATA_LENGTH, may range between 65..104 (if using secp256k1 usually a value of 70 or 71 or 72)
  • Index 14 DIGEST_DATA_START, first byte of digest
  • Index 14+DIGEST_DATA_LENGTH, end of the digest

In case the digest has byte size 72 (secp256k1) the preamble looks like (followed by the ECDSA digest):

[0, 116, 9, 115, 105, 103, 110, 97, 116, 117, 114, 101, 0, 72 ]

The digest is calculated using ciphers secp256k1/SHA256. Trailing padding bytes fill up to total length of 118 bytes.

Usage

Private Key Generation

This is the key that must be kept secret and is used to sign your WASM files.

openssl ecparam -name secp256k1 -genkey -noout -out signerkey.pem

Public Key Generation

This is the key that should be published or embedded in your application.

openssl ec -in signerkey.pem -pubout -outform pem -out signerkey.pub.pem

Signing the WASM file

The command line tool returns with exit code 0 on success, otherwise with error code 1

wasm-sign -k signerkey.pem module.wasm signed-module.wasm

Verifying the WASM file

The command line tool returns with exit code 0 on success, otherwise with error code 1

wasm-sign -v -k signerkey.pub.pem signed-module.wasm

Signature Example

Output of hexdump -C signed-module.wasm:

00000110
00000120  xx xx xx xx xx xx xx 00  74 09 73 69 67 6e 61 74  |j$......t.signat|
00000130  75 72 65 00 47 30 45 02  20 58 20 79 4b 91 52 39  |ure.G0E. X yK.R9|
00000140  75 52 69 f0 cf dc 81 8a  7c d8 ab 08 1d 49 ab c2  |uRi.....|....I..|
00000150  fa 19 79 f5 03 92 e9 9b  87 02 21 00 8f a0 ad 5a  |..y.......!....Z|
00000160  f2 55 ce cf c6 ed 82 15  5a ed 7a 47 43 d9 e5 4e  |.U......Z.zGC..N|
00000170  fd 74 79 e8 80 4e 82 9c  08 eb 8e 9a 00 00 00 00  |.ty..N..........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000190  00 00 00 00 00 00 00 00  00 00 00 00 00 00        |..............  |

Build

cargo build --release

Unit Test

cargo test

End2End Test with command line tool

make test

About

WebAssembly signing and verification tool

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published