Installs and configures rsyslog to replace sysklogd for client and/or server use. By default, the service will be configured to log to files on local disk. See the Recipes and Examples sections for other uses.
Tested on:
- Ubuntu 10.04+
- Red Hat / CentOS 5+
- Fedora 20+
- OmniOS r151006c
To use the recipe[rsyslog::client]
recipe, you'll need to set up the rsyslog.server_search
or rsyslog.server_ip
attributes. See the Recipes and Examples sections below.
See attributes/default.rb
for default values.
node['rsyslog']['log_dir']
- If the node is an rsyslog server, this specifies the directory where the logs should be stored.node['rsyslog']['working_dir']
- The temporary working directory where messages are bufferednode['rsyslog']['server']
- Determined automatically and set to true on the server.node['rsyslog']['server_ip']
- If not defined then search will be used to determine rsyslog server. Default isnil
. This can be a string or an array.node['rsyslog']['server_search']
- Specify the criteria for the server search operation. Default isrole:loghost
.node['rsyslog']['protocol']
- Specify whether to useudp
ortcp
for remote loghost. Default istcp
. To use both specify both in a string e.g. 'udptcp'.node['rsyslog']['bind']
- Specify the address to which the server should be listening; only use withnode['rsyslog']['protocol'] = 'udp'
because the feature does not work with thetcp
protocol (more info).node['rsyslog']['port']
- Specify the port which rsyslog should connect to a remote loghost.node['rsyslog']['remote_logs']
- Specify wether to send all logs to a remote server (client option). Default istrue
.node['rsyslog']['per_host_dir']
- "PerHost" directories for template statements in35-server-per-host.conf
. Default value is the previous cookbook version's value, to preserve compatibility. See server recipe below.node['rsyslog']['priv_seperation']
- Whether to use privilege separation or not.node['rsyslog']['priv_user']
- User to run as when using privilege separation. Defult isnode['rsyslog']['user']
node['rsyslog']['priv_group']
- Group to run as when using privilege separation. Defult isnode['rsyslog']['group']
node['rsyslog']['max_message_size']
- Specify the maximum allowed message size. Default is 2k.node['rsyslog']['user']
- Who should own the configuration files and directoriesnode['rsyslog']['group']
- Who should group-own the configuration files and directoriesnode['rsyslog']['defaults_file']
- The full path to the defaults/sysconfig file for the service.node['rsyslog']['service_name']
- The platform-specific name of the servicenode['rsyslog']['preserve_fqdn']
- Value of the$PreserveFQDN
configuration directive in/etc/rsyslog.conf
. Default is 'off' for compatibility purposes.node['rsyslog']['high_precision_timestamps']
- Enable high precision timestamps, instead of the "old style" format. Default is 'false'.node['rsyslog']['repeated_msg_reduction']
- Value of$RepeatedMsgReduction
configuration directive in/etc/rsyslog.conf
. Default is 'on'node['rsyslog']['logs_to_forward']
- Specifies what logs should be sent to the remote rsyslog server. Default is all ( *.* ).node['rsyslog']['default_log_dir']
- log directory used in50-default.conf
template, defaults to/var/log
node['rsyslog']['default_facility_logs']
- Hash containing log facilities and destinations used in50-default.conf
template.node['rsyslog']['default_file_template']
- The name of a pre-defined log format template (ie - RSYSLOG_FileFormat), used for local log files.node['rsyslog']['rate_limit_interval']
- Value of the $SystemLogRateLimitInterval configuration directive in/etc/rsyslog.conf
. Default is nil, leaving it to the platform default.node['rsyslog']['rate_limit_burst']
- Value of the $SystemLogRateLimitBurst configuration directive in/etc/rsyslog.conf
. Default is nil, leaving it to the platform default.node['rsyslog']['action_queue_max_disk_space']
- Max amount of disk space the disk-assisted queue is allowed to use (more info).node['rsyslog']['enable_tls']
- Whether or not to enable TLS encryption. When enabled, forces protocol totcp
. Default isfalse
.node['rsyslog']['tls_ca_file']
- Path to TLS CA file. Required for both server and clients.node['rsyslog']['tls_certificate_file']
- Path to TLS certificate file. Required for server, optional for clients.node['rsyslog']['tls_key_file']
- Path to TLS key file. Required for server, optional for clients.node['rsyslog']['tls_auth_mode']
- Value for$InputTCPServerStreamDriverAuthMode
/$ActionSendStreamDriverAuthMode
, determines whether client certs are validated. Defaults toanon
(no validation).node['rsyslog']['use_local_ipv4']
- Whether or not to make use the remote local IPv4 address on cloud systems when searching for servers (where available). Default is 'false'.node['rsyslog']['allow_non_local']
- Whether or not to allow non-local messages. If 'false', incoming messages are only allowed from 127.0.0.1. Default is 'false'.node['rsyslog']['additional_directives']
- Hash of additional directives and their values to place in the main rsyslog config file
Installs the rsyslog package, manages the rsyslog service and sets up basic configuration for a standalone machine.
Includes recipe[rsyslog]
.
Uses node['rsyslog']['server_ip']
or Chef search (in that precedence order) to determine the remote syslog server's IP address. If search is used, the search query will look for the first ipaddress
returned from the criteria specified in node['rsyslog']['server_search']
.
If the node itself is a rsyslog server ie it has rsyslog.server
set to true then the configuration is skipped.
If the node had an /etc/rsyslog.d/35-server-per-host.conf
file previously configured, this file gets removed to prevent duplicate logging.
Any previous logs are not cleaned up from the log_dir
.
Configures the node to be a rsyslog server. The chosen rsyslog server node should be defined in the server_ip
attribute or resolvable by the specified search criteria specified in node['rsyslog']['server_search]
(so that nodes making use of the client
recipe can find the server to log to).
This recipe will create the logs in node['rsyslog']['log_dir']
, and the configuration is in /etc/rsyslog.d/server.conf
. This recipe also removes any previous configuration to a remote server by removing the /etc/rsyslog.d/remote.conf
file.
The cron job used in the previous version of this cookbook is removed, but it does not remove any existing cron job from your system (so it doesn't break anything unexpectedly). We recommend setting up logrotate for the logfiles instead.
The log_dir
will be concatenated with per_host_dir
to store the logs for each client. Modify the attribute to have a value that is allowed by rsyslogs template matching values, see the rsyslog documentation for this.
Directory structure:
<%= @log_dir %>/<%= @per_host_dir %>/"logfile"
For example for the system with hostname www
:
/srv/rsyslog/2011/11/19/www/messages
For example, to change this to just the hostname, set the attribute node['rsyslog']['per_host_dir']
via a role:
"rsyslog" => { "per_host_dir" => "%HOSTNAME%" }
At this time, the server can only listen on UDP or TCP.
Configures a text file input monitor to push a log file into rsyslog.
Attributes:
name
: name of the resource, also used for the syslog tag. Required.file
: file path for input file to monitor. Required.priority
: config order priority. Defaults to99
.severity
: syslog severity. Must be one ofemergency
,alert
,critical
,error
,warning
,notice
,info
ordebug
. If undefined, rsyslog interprets this asnotice
.facility
: syslog facility. Must be one ofauth
,authpriv
,daemon
,cron
,ftp
,lpr
,kern
,mail
,news
,syslog
,user
,uucp
,local0
, ... ,local7
. If undefined, rsyslog interprets this aslocal0
.cookbook
: cookbook containing the template. Defaults torsyslog
.source
: template file source. Defaults tofile-input.conf.erb
Use recipe[rsyslog]
to install and start rsyslog as a basic configured service for standalone systems.
Use recipe[rsyslog::client]
to have nodes log to a remote server (which is found via the server_ip
attribute or by the recipe's search call -- see client)
Use recipe[rsyslog::server]
to set up a rsyslog server. It will listen on node['rsyslog']['port']
protocol node['rsyslog']['protocol']
.
If you set up a different kind of centralized loghost (syslog-ng, graylog2, logstash, etc), you can still send log messages to it as long as the port and protocol match up with the server software. See Examples
Use rsyslog_file_input
within your recipes to forward log files to
your remote syslog server.
A base
role (e.g., roles/base.rb), applied to all nodes so they are syslog clients:
name "base"
description "Base role applied to all nodes
run_list("recipe[rsyslog::client]")
Then, a role for the loghost (should only be one):
name "loghost"
description "Central syslog server"
run_list("recipe[rsyslog::server]")
By default this will set up the clients search for a node with the loghost
role to talk to the server on TCP port 514. Change the protocol
and port
rsyslog attributes to modify this.
If you want to specify another syslog compatible server with a role other than loghost, simply fill free to use the server_ip
attribute or the server_search
attribute.
Example role that sets the per host directory:
name "loghost"
description "Central syslog server"
run_list("recipe[rsyslog::server]")
default_attributes(
"rsyslog" => { "per_host_dir" => "%HOSTNAME%" }
)
Default rsyslog options are rendered for RHEL family platforms, in /etc/rsyslog.d/50-default.conf
with other platforms using a configuration like Debian family defaults. You can override these
log facilities and destinations using the rsyslog['default_facility_logs']
hash.
name "facility_log_example"
run_list("recipe[rsyslog::default]")
default_attributes(
"rsyslog" => {
"facility_logs" => {
'*.info;mail.none;authpriv.none;cron.none' => "/var/log/messages",
'authpriv' => '/var/log/secure',
'mail.*' => '-/var/log/maillog',
'*.emerg' => '*'
}
}
)
This section details "quick development" steps. For a detailed explanation, see [[Contributing.md]].
-
Clone this repository from GitHub:
$ git clone [email protected]:opscode-cookbooks/rsyslog.git
-
Create a git branch
$ git checkout -b my_bug_fix
-
Install dependencies:
$ bundle install
-
Make your changes/patches/fixes, committing appropriately
-
Write tests
-
Run the tests:
- bundle exec foodcritic -f any .
- bundle exec rspec
- bundle exec rubocop
- bundle exec kitchen test
In detail: - Foodcritic will catch any Chef-specific style errors - RSpec will run the unit tests - Rubocop will check for Ruby-specific style errors - Test Kitchen will run and converge the recipes
- Author:: Joshua Timberman ([email protected])
- Author:: Denis Barishev ([email protected])
- Author:: Tim Smith ([email protected])
Copyright:: 2009-2015, Chef Software, Inc
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http:https://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.