This project is not maintained anymore and is archived. Feel free to fork and make your own changes if needed. For more detail read my blog post: Taking an indefinite sabbatical from my projects
Thanks to everyone for their valuable feedback and contributions.
Tutorial for vim-go. A simple tutorial on how to install and use vim-go.
We're going to use vim-plug
to install vim-go. Feel free to use other plugin
managers instead. We will create a minimal ~/.vimrc
, and add to it as we go along.
First fetch and install vim-plug
along with vim-go
:
curl -fLo ~/.vim/autoload/plug.vim --create-dirs https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
git clone https://github.com/fatih/vim-go.git ~/.vim/plugged/vim-go
Create ~/.vimrc
with following content:
call plug#begin()
Plug 'fatih/vim-go', { 'do': ':GoInstallBinaries' }
call plug#end()
Or open Vim and execute :GoInstallBinaries
. This is a vim-go
command that
installs all vim-go
dependencies for you. It doesn't download pre compiled
binaries, instead it calls go get
under the hood, so the binaries are all
compiled in your host machine (which is both safe and simplifies the
installation process as we don't need to provide binaries for multiple
platforms). If you already have some of the dependencies (such as guru
,
goimports
) call :GoUpdateBinaries
to update the binaries.
For the tutorial, all our examples will be under
GOPATH/src/github.com/fatih/vim-go-tutorial/
. Please be sure you're inside
this folder. This will make it easy to follow the
tutorial. If you already have a GOPATH
set up just execute:
go get github.com/fatih/vim-go-tutorial
Or create the folder, if necessary.
Open the main.go
file from your terminal:
vim main.go
It's a very basic file that prints vim-go
to stdout.
You can easily run the file with :GoRun %
. Under the hood it calls go run
for
the current file. You should see that it prints vim-go
.
For whole package run with :GoRun
.
Replace vim-go
with Hello Gophercon
. Let us compile the file instead of running it.
For this we have :GoBuild
. If you call it, you should see this message:
vim-go: [build] SUCCESS
Under the hood it calls go build
, but it's a bit smarter. It does a couple of
things differently:
- No binaries are created; you can call
:GoBuild
multiple times without polluting your workspace. - It automatically
cd
s into the source package's directory - It parses any errors and shows them inside a quickfix list
- It automatically detects the GOPATH and modifies it if needed (detects
projects such as
gb
,Godeps
, etc..) - Runs async if used within Vim 8.0.xxx or NeoVim
Let's introduce two errors by adding two compile errors:
var b = foo()
func main() {
fmt.Println("Hello GopherCon")
a
}
Save the file and call :GoBuild
again.
This time the quickfix view will be opened. To jump between the errors you can
use :cnext
and :cprevious
. Let us fix the first error, save the
file and call :GoBuild
again. You'll see the quickfix list is updated with a
single error. Remove the second error as well, save the file and call
:GoBuild
again. Now because there are no more errors, vim-go automatically
closes the quickfix window for you.
Let us improve it a little bit. Vim has a setting called autowrite
that
writes the content of the file automatically if you call :make
. vim-go also
makes use of this setting. Open your .vimrc
and add the following:
set autowrite
Now you don't have to save your file anymore when you call :GoBuild
. If we
reintroduce the two errors and call :GoBuild
, we can now iterate much more
quickly by only calling :GoBuild
.
:GoBuild
jumps to the first error encountered. If you don't want to jump
append the !
(bang) sign: :GoBuild!
.
In all the go
commands, such as :GoRun
, :GoInstall
, :GoTest
, etc..,
whenever there is an error the quickfix window always will pop up.
- You can add some shortcuts to make it easier to jump between errors in quickfix list:
map <C-n> :cnext<CR>
map <C-m> :cprevious<CR>
nnoremap <leader>a :cclose<CR>
- I also use these shortcuts to build and run a Go program with
<leader>b
and<leader>r
:
autocmd FileType go nmap <leader>b <Plug>(go-build)
autocmd FileType go nmap <leader>r <Plug>(go-run)
- There are two types of error lists in Vim. One is called
location list
the otherquickfix
. Unfortunately the commands for each lists are different. So:cnext
only works forquickfix
list, forlocation lists
you have to use:lnext
. Some of the commands invim-go
open a location list, because location lists are associated with a window and each window can have a separate list. This means you can have multiple windows, and multiple location lists, one forBuild
, one forCheck
, one forTests
, etc..
Some people prefer to use only quickfix
though. If you add the following to
your vimrc
all lists will be of type quickfix
:
let g:go_list_type = "quickfix"
Let's write a simple function and a test for the function. Add the following:
func Bar() string {
return "bar"
}
Open a new file called main_test.go
(it doesn't matter how you open it, from
inside Vim, a separate Vim session, etc.. it's up to you). Let us use the
current buffer and open it from Vim via :edit main_test.go
.
When you open the new file you notice something. The file automatically has the package declaration added:
package main
This is done by vim-go automatically. It detected that the file is inside a
valid package and therefore created a file based on the package name (in our
case the package name was main
). If there are no files, vim-go automatically
populates the content with a simple main package.
Update the test file with the following code:
package main
import (
"testing"
)
func TestBar(t *testing.T) {
result := Bar()
if result != "bar" {
t.Errorf("expecting bar, got %s", result)
}
}
Call :GoTest
. You'll see the following message:
vim-go: [test] PASS
:GoTest
calls go test
under the hood. It has the same improvements
we have for :GoBuild
. If there is any test error, a quickfix list is
opened again and you can jump to it easily.
Another small improvement is that you don't have to open the test file itself.
Try it yourself: open main.go
and call :GoTest
. You'll see the tests will
be run for you as well.
:GoTest
times out after 10 seconds by default. This is useful because Vim is
not async by default. You can change the timeout value with let g:go_test_timeout = '10s'
We have two more commands that make it easy to deal with test files. The first
one is :GoTestFunc
. This only tests the function under your cursor.
Let us change the content of the test file (main_test.go
) to:
package main
import (
"testing"
)
func TestFoo(t *testing.T) {
t.Error("intentional error 1")
}
func TestBar(t *testing.T) {
result := Bar()
if result != "bar" {
t.Errorf("expecting bar, got %s", result)
}
}
func TestQuz(t *testing.T) {
t.Error("intentional error 2")
}
Now when we call :GoTest
a quickfix window will open with two errors.
However if go inside the TestBar
function and call :GoTestFunc
, you'll see
that our test passes! This is really useful if you have a lot of tests that
take time and you only want to run certain tests.
The other test-related command is :GoTestCompile
. Tests not only need to
pass with success, they must compile without any problems.
:GoTestCompile
compiles your test file, just like :GoBuild
and opens a
quickfix if there are any errors. This however doesn't run the tests. This
is very useful if you have a large test which you're editing a lot. Call
:GoTestCompile
in the current test file, you should see the following:
vim-go: [test] SUCCESS
- As with
:GoBuild
we can add a mapping to easily call:GoTest
with a key combination. Add the following to your.vimrc
:
autocmd FileType go nmap <leader>t <Plug>(go-test)
Now you can easily test your files via <leader>t
- Let's make building Go files simpler. First, remove the following mapping we added previously:
autocmd FileType go nmap <leader>b <Plug>(go-build)
We're going to add an improved mapping. To make it seamless for
any Go file we can create a simple Vim function that checks the type of the Go
file, and executes :GoBuild
or :GoTestCompile
. Below is the helper function
you can add to your .vimrc
:
" run :GoBuild or :GoTestCompile based on the go file
function! s:build_go_files()
let l:file = expand('%')
if l:file =~# '^\f\+_test\.go$'
call go#test#Test(0, 1)
elseif l:file =~# '^\f\+\.go$'
call go#cmd#Build(0)
endif
endfunction
autocmd FileType go nmap <leader>b :<C-u>call <SID>build_go_files()<CR>
Now whenever you hit <leader>b
it'll build either your Go file or it'll
compile your test files seamlessly.
- By default the leader shortcut is defined as:
\
I've mapped my leader to,
as I find it more useful with the following setting (put this in the beginning of .vimrc):
let mapleader = ","
So with this setting, we can easily build any test and non test files with ,b
.
Let's dive further into the world of tests. Tests are really important. Go has a really great way of showing the coverage of your source code. vim-go makes it easy to see the code coverage without leaving Vim in a very elegant way.
Let's first change our main_test.go
file back to:
package main
import (
"testing"
)
func TestBar(t *testing.T) {
result := Bar()
if result != "bar" {
t.Errorf("expecting bar, got %s", result)
}
}
And main.go
to
package main
func Bar() string {
return "bar"
}
func Foo() string {
return "foo"
}
func Qux(v string) string {
if v == "foo" {
return Foo()
}
if v == "bar" {
return Bar()
}
return "INVALID"
}
Now let us call :GoCoverage
. Under the hood this calls go test -coverprofile tempfile
. It parses the lines from the profile and then dynamically changes
the syntax of your source code to reflect the coverage. As you see, because we
only have a test for the Bar()
function, that is the only function that is
green.
To clear the syntax highlighting you can call :GoCoverageClear
. Let us add a
test case and see how the coverage changes. Add the following to main_test.go
:
func TestQuz(t *testing.T) {
result := Qux("bar")
if result != "bar" {
t.Errorf("expecting bar, got %s", result)
}
result = Qux("qux")
if result != "INVALID" {
t.Errorf("expecting INVALID, got %s", result)
}
}
If we call :GoCoverage
again, you'll see that the Quz
function is now
tested as well and that it has a larger coverage. Call :GoCoverageClear
again
to clear the syntax highlighting.
Because calling :GoCoverage
and :GoCoverageClear
are used a lot together,
there is another command that makes it easy to call and clear the result. You
can also use :GoCoverageToggle
. This acts as a toggle and shows the coverage,
and when called again it clears the coverage. It's up to your workflow how you
want to use them.
Finally, if you don't like vim-go's internal view, you can also call
:GoCoverageBrowser
. Under the hood it uses go tool cover
to create a HTML
page and then opens it in your default browser. Some people like this more.
Using the :GoCoverageXXX
commands does not create any kind of temporary files
and doesn't pollute your workflow. So you don't have to deal with removing
unwanted files every time.
Add the following to your .vimrc
:
autocmd FileType go nmap <Leader>c <Plug>(go-coverage-toggle)
With this you can easily call :GoCoverageToggle
with <leader>c
Let us start with a sample main.go
file:
package main
import "fmt"
func main() {
fmt.Println("gopher" )
}
Let's start with something we know already. If we save the file, you'll see that
it'll be formatted automatically. It's enabled by default but can be disabled
if desired (not sure why you would though :)) with let g:go_fmt_autosave = 0
.
Optionally we also provide :GoFmt
command, which runs gofmt
under the hood.
Let's print the "gopher"
string in all uppercase. For it we're going to use
the strings
package. Change the definition to:
fmt.Println(strings.ToUpper("gopher"))
When you build it you'll get an error of course:
main.go|8| undefined: strings in strings.ToUpper
You'll see we get an error because the strings
package is not imported. vim-go
has a couple of commands to make it easy to manipulate the import declarations.
We can easily go and edit the file, but instead we're going to use the Vim
command :GoImport
. This command adds the given package to the import path.
Run it via: :GoImport strings
. You'll see the strings
package is being
added. The great thing about this command is that it also supports
completion. So you can just type :GoImport s
and hit tab.
We also have :GoImportAs
and :GoDrop
to edit the import paths.
:GoImportAs
is the same as :GoImport
, but it allows changing the package
name. For example :GoImportAs str strings
, will import strings
with the
package name str.
Finally :GoDrop
makes it easy to remove any import paths from the import
declarations. :GoDrop strings
will remove it from the import declarations.
Of course manipulating import paths is so 2010. We have better tools to handle
this case for us. If you haven't heard yet, it's called goimports
.
goimports
is a replacement for gofmt
. You have two ways of using it. The
first (and recommended) way is telling vim-go to use it when saving the
file:
let g:go_fmt_command = "goimports"
Now whenever you save your file, goimports
will automatically format and also
rewrite your import declarations. Some people do not prefer goimports
as it
might be slow on very large codebases. In this case we also have the
:GoImports
command (note the s
at the end). With this, you can explicitly
call goimports
Let us show more editing tips/tricks. There are two text objects that we can
use to change functions. Those are if
and af
. if
means inner function and
it allows you to select the content of a function enclosure. Change your main.go
file to:
package main
import "fmt"
func main() {
fmt.Println(1)
fmt.Println(2)
fmt.Println(3)
fmt.Println(4)
fmt.Println(5)
}
Put your cursor on the func
keyword Now execute the following in normal
mode and see what happens:
dif
You'll see that the function body is removed. Because we used the d
operator.
Undo your changes with u
. The great thing is that your cursor can be anywhere
starting from the func
keyword until the closing right brace }
. It uses the tool
motion under the hood. I wrote motion
explicitly for vim-go to support features like this. It's Go AST aware and thus
its capabilities are really good. Like what you might ask? Change main.go
to:
package main
import "fmt"
func Bar() string {
fmt.Println("calling bar")
foo := func() string {
return "foo"
}
return foo()
}
Previously we were using regexp-based text objects, which leads to problems.
For example in this example, put your cursor to the anonymous functions' func
keyword and execute dif
in normal
mode. You'll see that only the body of
the anonymous function is deleted.
We have only used the d
operator (delete) so far. However it's up to you. For
example you can select it via vif
or yank(copy) with yif
.
We also have af
, which means a function
. This text object includes the
whole function declaration. Change your main.go
to:
package main
import "fmt"
// bar returns a the string "foo" even though it's named as "bar". It's an
// example to be used with vim-go's tutorial to show the 'if' and 'af' text
// objects.
func bar() string {
fmt.Println("calling bar")
foo := func() string {
return "foo"
}
return foo()
}
So here is the great thing. Because of motion
we have full knowledge about
every single syntax node. Put your cursor on top of the func
keyword or
anywhere below or above (doesn't matter). If you now execute vaf
, you'll see
that the function declaration is being selected, along with the doc comment as
well! You can for example delete the whole function with daf
, and you'll see
that the comment is gone as well. Go ahead and put your cursor on top of the
comment and execute vif
and then vaf
. You'll see that it selects the
function body, even though your cursor is outside the function, or it selects
the function comments as well.
This is really powerful and this all is thanks to the knowledge we have from
let g:go_textobj_include_function_doc = 1
motion
. If you don't like comments
being a part of the function declaration, you can easily disable it with:
let g:go_textobj_include_function_doc = 0
If you are interested in learning more about motion
, check out the blog post I wrote for
more details: Treating Go types as objects in vim
(Optional question: without looking at the go/ast
package, is the doc comment
a part of the function declaration or not?)
There is a great plugin that allows you to split or join Go structs. It's
actually not a Go plugin, but it has support for Go structs. To enable it add
plugin directive between the plug
definition into your vimrc
, then do a :source ~/.vimrc
in your vim editor and run
:PlugInstall
. Example:
call plug#begin()
Plug 'fatih/vim-go'
Plug 'AndrewRadev/splitjoin.vim'
call plug#end()
Once you have installed the plugin, change the main.go
file to:
package main
type Foo struct {
Name string
Ports []int
Enabled bool
}
func main() {
foo := Foo{Name: "gopher", Ports: []int{80, 443}, Enabled: true}
}
Put your cursor on the same line as the struct expression. Now type gS
. This
will split
the struct expression into multiple lines. And you can even
reverse it. If your cursor is still on the foo
variable, execute gJ
in
normal
mode. You'll see that the field definitions are all joined.
This doesn't use any AST-aware tools, so for example if you type gJ
on top of
the fields, you'll see that only two fields are joined.
Vim-go supports two popular snippet plugins.
Ultisnips and
neosnippet. By default,
if you have Ultisnips
installed it'll work. Let us install ultisnips
first. Add it between the plug
directives in your vimrc
, then do a :source ~/.vimrc
in your vim editor and then run
:PlugInstall
. Example:
call plug#begin()
Plug 'fatih/vim-go'
Plug 'SirVer/ultisnips'
call plug#end()
There are many helpful snippets. To see the full list check our current snippets: https://github.com/fatih/vim-go/blob/master/gosnippets/UltiSnips/go.snippets
UltiSnips and YouCompleteMe may conflict on [tab] button
Let me show some of the snippets that I'm using the most. Change your main.go
content to:
package main
import "encoding/json"
type foo struct {
Message string
Ports []int
ServerName string
}
func newFoo() (*foo, error) {
return &foo{
Message: "foo loves bar",
Ports: []int{80},
ServerName: "Foo",
}, nil
}
func main() {
res, err := newFoo()
out, err := json.Marshal(res)
}
Let's put our cursor just after the newFoo()
expression. Let's panic here if
the err is non-nil. Type errp
in insert mode and just hit tab
. You'll see
that it'll be expanded and put your cursor inside the `panic()`` function:
if err != nil {
panic( )
^
cursor position
}
Fill the panic with err
and move on to the json.Marshal
statement. Do the
same for it.
Now let us print the variable out
. Because variable printing is so popular,
we have several snippets for it:
fn -> fmt.Println()
ff -> fmt.Printf()
ln -> log.Println()
lf -> log.Printf()
Here ff
and lf
are special. They dynamically copy the variable name into
the format string as well. Try it yourself. Move your cursor to the end of the
main function and type ff
and hit tab. After expanding the snippet you can
start typing. Type string(out)
and you'll see that both the format string and
the variadic arguments will be filled with the same string you have typed.
This comes very handy to quickly print variables for debugging.
Run your file with :GoRun
and you should see the following output:
string(out) = {"Message":"foo loves bar","Ports":[80],"ServerName":"Foo"}
Great. Now let me show one last snippet that I think is very useful. As you see
from the output the fields Message
and Ports
begin with uppercase
characters. To fix it we can add a json tag to the struct field. vim-go makes it
very easy to add field tags. Move your cursor to the end of the Message
string line in the field:
type foo struct {
Message string .
^ put your cursor here
}
In insert
mode, type json
and hit tab. You'll see that it'll be
automatically expanded to valid field tag. The field name is converted
automatically to a lowercase and put there for you. You should now see the
following:
type foo struct {
Message string `json:"message"`
}
It's really amazing. But we can do even better! Go ahead and create a
snippet expansion for the ServerName
field. You'll see that it's converted to
server_name
. Amazing right?
type foo struct {
Message string `json:"message"`
Ports []int
ServerName string `json:"server_name"`
}
- Don't forget to change
gofmt
togoimports
let g:go_fmt_command = "goimports"
- When you save your file,
gofmt
shows any errors during parsing the file. If there are any parse errors it'll show them inside a quickfix list. This is enabled by default. Some people don't like it. To disable it add:
let g:go_fmt_fail_silently = 1
- You can change which case it should apply while converting. By default vim-go
uses
snake_case
. But you can also usecamelCase
if you wish. For example if you wish to change the default value to camel case use the following setting:
let g:go_addtags_transform = "camelcase"
By default we only have a limited syntax highlighting enabled. There are two
main reasons. First is that people don't like too much color because it causes
too much distraction. The second reason is that it impacts
the performance of Vim a lot. We need to enable it explicitly. First add the
following settings to your .vimrc
:
let g:go_highlight_types = 1
This highlights the bar
and foo
below:
type foo struct{
quz string
}
type bar interface{}
Adding the following:
let g:go_highlight_fields = 1
Will highlight the quz
below:
type foo struct{
quz string
}
f := foo{quz:"QUZ"}
f.quz # quz here will be highlighted
If we add the following:
let g:go_highlight_functions = 1
We are now also highlighting function and method names in declarations. Foo
and main
will now be highlighted, but Println
is not as that is an
invocation:
func (t *T) Foo() {}
func main() {
fmt.Println("vim-go")
}
If you also want to highlight function and method invocations, add the following:
let g:go_highlight_function_calls = 1
Now, Println
will also be highlighted:
func (t *T) Foo() {}
func main() {
fmt.Println("vim-go")
}
If you add let g:go_highlight_operators = 1
it will highlight the following
operators such as:
- + % < > ! & | ^ * =
-= += %= <= >= != &= |= ^= *= ==
<< >> &^
<<= >>= &^=
:= && || <- ++ --
If you add let g:go_highlight_extra_types = 1
the following extra types
will be highlighted as well:
bytes.(Buffer)
io.(Reader|ReadSeeker|ReadWriter|ReadCloser|ReadWriteCloser|Writer|WriteCloser|Seeker)
reflect.(Kind|Type|Value)
unsafe.Pointer
Let's move on to more useful highlights. What about build tags? It's not easy
to implement it without looking into the go/build
document. Let us first add
the following: let g:go_highlight_build_constraints = 1
and change your
main.go
file to:
// build linux
package main
You'll see that it's gray, thus it's not valid. Prepend +
to the build
word and save it again:
// +build linux
package main
Do you know why? If you read the go/build
package you'll see that the
following is buried in the document:
... preceded only by blank lines and other line comments.
Let us change our content again and save it to:
// +build linux
package main
You'll see that it automatically highlighted it in a valid way. It's really
great. If you go and change linux
to something you'll see that it also checks
for valid official tags (such as darwin
,race
, ignore
, etc... )
Another similar feature is to highlight the Go directive //go:generate
. If
you put let g:go_highlight_generate_tags = 1
into your vimrc, it'll highlight
a valid directive that is processed with the go generate
command.
We have a lot more highlight settings, these are just a sneak peek of it. For
more check out the settings via :help go-settings
- Some people don't like how the tabs are shown. By default Vim shows
8
spaces for a single tab. However it's up to us how to represent in Vim. The following will change it to show a single tab as 4 spaces:
autocmd BufNewFile,BufRead *.go setlocal noexpandtab tabstop=4 shiftwidth=4
This setting will not expand a tab into spaces. It'll show a single tab as 4
spaces. It will use 4
spaces to represent a single indent.
- A lot of people ask for my colorscheme. I'm using a slightly modified
molokai
. To enable it add the Plug directive just between the plug definitions:
call plug#begin()
Plug 'fatih/vim-go'
Plug 'fatih/molokai'
call plug#end()
Also add the following to enable molokai with original color scheme and 256 color version:
let g:rehash256 = 1
let g:molokai_original = 1
colorscheme molokai
After that restart Vim and call :source ~/.vimrc
, then :PlugInstall
. This will pull the plugin
and install it for you. After the plugin is installed, you need to restart Vim
again.
From the previous examples you saw that we had many commands that would show
the quickfix window when there was an issue. For example :GoBuild
shows
errors from the compile output (if any). Or for example :GoFmt
shows the
parse errors of the current file while formatting it.
We have many other commands that allows us to call and then collect errors, warnings or suggestions.
For example :GoLint
. Under the hood it calls golint
, which is a command
that suggests changes to make Go code more idiomatic. There
is also :GoVet
, which calls go vet
under the hood. There are many other
tools that check certain things. To make it easier, someone decided to
create a tool that calls all these checkers. This tool is called
gometalinter
. And vim-go supports it via the command :GoMetaLinter
. So what
does it do?
If you just call :GoMetaLinter
for a given Go source code. By default it'll run
go vet
, golint
and errcheck
concurrently. gometalinter
collects
all the outputs and normalizes it to a common format. Thus if you call
:GoMetaLinter
, vim-go shows the result of all these checkers inside a
quickfix list. You can then jump easily between the lint, vet and errcheck
results. The setting for this default is as following:
let g:go_metalinter_enabled = ['vet', 'golint', 'errcheck']
There are many other tools and you can easily customize this list yourself. If
you call :GoMetaLinter
it'll automatically uses the list above.
Because :GoMetaLinter
is usually fast, vim-go also can call it whenever you
save a file (just like :GoFmt
). To enable it you need to add the following to
your .vimrc:
let g:go_metalinter_autosave = 1
What's great is that the checkers for the autosave is different than what you
would use for :GoMetaLinter
. This is great because you can customize it so only
fast checkers are called when you save your file, but others if you call
:GoMetaLinter
. The following setting let you customize the checkers for the
autosave
feature.
let g:go_metalinter_autosave_enabled = ['vet', 'golint']
As you see by default vet
and golint
are enabled. Lastly, to prevent
:GoMetaLinter
running for too long, we have a setting to cancel it after a
given timeout. By default it is 5 seconds
but can be changed by the following
setting:
let g:go_metalinter_deadline = "5s"
So far we have only jumped between two files, main.go
and main_test.go
. It's
really easy to switch if you have just two files in the same directory. But
what if the project gets larger and larger with time? Or what if the file
itself is so large that you have hard time navigating it?
vim-go has several ways of improving navigation. First let me show how we can quickly jump between a Go source code and its test file.
Suppose you have both a foo.go
and its equivalent test file foo_test.go
.
If you have main.go
from the previous examples with its test file you can
also open it. Once you open it just execute the following Vim command:
:GoAlternate
You'll see that you switched immediately to main_test.go
. If you execute it
again, it'll switch to main.go
. :GoAlternate
works as a toggle and is
really useful if you have a package with many test files. The idea is very
similar to the plugin a.vim command
names. This plugin jumps between a .c
and .h
file. In our case
:GoAlternate
is used to switch between a test and non-test file.
One of the most used features is go to definition
. From the beginning, vim-go
had the :GoDef
command that jumps to any identifier's declaration. Let
us first create a main.go
file to show it in action. Create it with the
following content:
package main
import "fmt"
type T struct {
Foo string
}
func main() {
t := T{
Foo: "foo",
}
fmt.Printf("t = %+v\n", t)
}
Now we have here several ways of jumping to declarations. For example if you put
your cursor on top of T
expression just after the main function and call
:GoDef
it'll jump to the type declaration.
If you put your cursor on top of the t
variable declaration just after the
main function and call :GoDef
, you'll see that nothing will happen. Because
there is no place to go, but if you scroll down a few lines and put your cursor
to the t
variable used in fmt.Printf()
and call :GoDef
, you'll see that
it jumped to the variable declaration.
:GoDef
not only works for local scope, it works also globally
(acrossGOPATH
). If, for example, you put your cursor on top of the Printf()
function and call :GoDef
, it'll jump directly to the fmt
package. Because
this is used so frequently, vim-go overrides the built in Vim shortcuts gd
and ctrl-]
as well. So instead of :GoDef
you can easily use gd
or
ctrl-]
Once we jump to a declaration, we also might want to get back into our previous
location. By default there is the Vim shortcut ctrl-o
that jumps to the
previous cursor location. It works great when it does, but not good enough if
you're navigating between Go declarations. If, for example, you jump to a file
with :GoDef
and then scroll down to the bottom, and then maybe to the top,
ctrl-o
will remember these locations as well. So if you want to jump back to
the previous location when invoking :GoDef
, you have to hit ctrl-o
multiple
times. And this is really annoying.
We don't need to use this shortcut though, as vim-go has a better implementation
for you. There is a command :GoDefPop
which does exactly this. vim-go
keeps an internal stack list for all the locations you visit with :GoDef
.
This means you can jump back easily again via :GoDefPop
to your older
locations, and it works even if you scroll down/up in a file. And because this
is also used so many times we have the shortcut ctrl-t
which calls under the
hood :GoDefPop
. So to recap:
- Use
ctrl-]
orgd
to jump to a definition, locally or globally - Use
ctrl-t
to jump back to the previous location
Let us move on with another question, suppose you jump so far that you just
want to back to where you started? As mentioned earlier,
vim-go keeps an history of all your locations invoked via :GoDef
. There is a
command that shows all these and it's called :GoDefStack
. If you call it,
you'll see that a custom window with a list of your old locations will be
shown. Just navigate to your desired location and hit enter. And finally to
clear the stack list anytime call :GoDefStackClear
.
From the previous example we see that :GoDef
is nice if you know where you want to
jump. But what if you don't know what your next destination is? Or you just
partially know the name of a function?
In our Edit it
section I mentioned a tool called motion
, which is a
custom built tool just for vim-go. motion
has other capabilities as well.
motion
parses your Go package and thus has a great understanding of all
declarations. We can take advantage of this feature for jumping between
declarations. There are two commands, which are not available until you install
a certain plugin. The commands are:
:GoDecls
:GoDeclsDir
First let us enable these two commands by installing the necessary plugin. The
plugin is called ctrlp. Long-time Vim
users have it installed already. To install it add the following line between
your plug
directives, then do a :source ~/.vimrc
in your vim editor and call :PlugInstall
to install it:
Plug 'ctrlpvim/ctrlp.vim'
Once you have it installed, use the following main.go
content:
package main
import "fmt"
type T struct {
Foo string
}
func main() {
t := T{
Foo: "foo",
}
fmt.Printf("t = %+v\n", t)
}
func Bar() string {
return "bar"
}
func BarFoo() string {
return "bar_foo"
}
And a main_test.go
file with the following content:
package main
import (
"testing"
)
type files interface{}
func TestBar(t *testing.T) {
result := Bar()
if result != "bar" {
t.Errorf("expecting bar, got %s", result)
}
}
func TestQuz(t *testing.T) {
result := Qux("bar")
if result != "bar" {
t.Errorf("expecting bar, got %s", result)
}
result = Qux("qux")
if result != "INVALID" {
t.Errorf("expecting INVALID, got %s", result)
}
}
Open main.go
and call :GoDecls
. You'll see that :GoDecls
shows all type
and function declarations for you. If you type ma
you'll see that ctrlp
filters the list for you. If you hit enter
it will automatically jump to it.
The fuzzy search capabilities combined with motion
's AST capabilities brings
us a very simple to use but powerful feature.
For example, call :GoDecls
and write foo
. You'll see that it'll filter
BarFoo
for you. The Go parser is very fast and works very well with large files
with hundreds of declarations.
Sometimes just searching within the current file is not enough. A Go package can
have multiple files (such as tests). A type declaration can be in one file,
whereas a some functions specific to a certain set of features can be in
another file. This is where :GoDeclsDir
is useful. It parses the whole
directory for the given file and lists all the declarations from the files in the
given directory (but not subdirectories).
Call :GoDeclsDir
. You'll see this time it also included the declarations from
the main_test.go
file as well. If you type Bar
, you'll see both the Bar
and TestBar
functions. This is really great if you just want to get an
overview of all type and function declarations, and also jump to them.
Let's continue with a question. What if you just want to move to the next or previous function? If your current function body is long, you'll probably will not see the function names. Or maybe there are other declarations between the current and other functions.
Vim already has motion operators like w
for words or b
for backwards words.
But what if we could add motions for Go ast? For example for function declarations?
vim-go provides(overrides) two motion objects to move between functions. These are:
]] -> jump to next function
[[ -> jump to previous function
Vim has these shortcuts by default. But those are suited for C source code and
jumps between braces. We can do it better. Just like our previous example,
motion
is used under the hood for this operation
Open main.go
and move to the top of the file. In normal
mode, type ]]
and
see what happens. You'll see that you jumped to the main()
function. Another
]]
will jump to Bar()
If you hit [[
it'll jump back to the main()
function.
]]
and [[
also accepts counts
. For example if you move to the top again
and hit 3]]
you'll see that it'll jump to the third function in the source file.
And going forward, because these are valid motions, you can apply operators to
it as well!
If you move your file to the top and hit d]]
you'll see that it deleted
anything before the next function. For example one useful usage would be typing
v]]
and then hit ]]
again to select the next function, until you've done
with your selection.
- We can improve it to control how it opens the alternate file. Add the
following to your
.vimrc
:
autocmd Filetype go command! -bang A call go#alternate#Switch(<bang>0, 'edit')
autocmd Filetype go command! -bang AV call go#alternate#Switch(<bang>0, 'vsplit')
autocmd Filetype go command! -bang AS call go#alternate#Switch(<bang>0, 'split')
autocmd Filetype go command! -bang AT call go#alternate#Switch(<bang>0, 'tabe')
This will add new commands, called :A
, :AV
, :AS
and :AT
. Here :A
works just like :GoAlternate
, it replaces the current buffer with the
alternate file. :AV
will open a new vertical split with the alternate file.
:AS
will open the alternate file in a new split view and :AT
in a new tab.
These commands are very productive depending on how you use them, so I think
it's useful to have them.
- The "go to definition" command families are very powerful but yet easy to use.
Under the hood it uses by default the tool
guru
(formerlyoracle
).guru
has an excellent track record of being very predictable. It works for dot imports, vendorized imports and many other non-obvious identifiers. But sometimes it's very slow for certain queries. Previously vim-go was usinggodef
which is very fast on resolving queries. With the latest release one can easily use or switch the underlying tool for:GoDef
. To change it back togodef
use the following setting:
let g:go_def_mode = 'godef'
- Currently by default
:GoDecls
and:GoDeclsDir
show type and function declarations. This is customizable with theg:go_decls_includes
setting. By default it's in the form of:
let g:go_decls_includes = "func,type"
If you just want to show function declarations, change it to:
let g:go_decls_includes = "func"
Writing/editing/changing code is usually something we can do only if we first understand what the code is doing. vim-go has several ways to make it easy to understand what your code is all about.
Let's start with the basics. Go documentation is very well-written and is highly integrated into the Go AST as well. If you just write some comments, the parser can easily parse it and associate with any node in the AST. So what it means is that we can easily find the documentation in the reverse order. If you have the node from an AST, you can easily read the documentation (if you have it)!
We have a command called :GoDoc
that shows any documentation associated with
the identifier under your cursor. Let us change the content of main.go
to:
package main
import "fmt"
func main() {
fmt.Println("vim-go")
fmt.Println(sayHi())
fmt.Println(sayYoo())
}
// sayHi() returns the string "hi"
func sayHi() string {
return "hi"
}
func sayYoo() string {
return "yoo"
}
Put your cursor on top of the Println
function just after the main
function
and call :GoDoc
. You'll see that it vim-go automatically opens a scratch
window that shows the documentation for you:
import "fmt"
func Println(a ...interface{}) (n int, err error)
Println formats using the default formats for its operands and writes to
standard output. Spaces are always added between operands and a newline is
appended. It returns the number of bytes written and any write error
encountered.
It shows the import path, the function signature and then finally the doc
comment of the identifier. Initially vim-go was using plain go doc
, but it
has some shortcomings, such as not resolving based on a byte identifier. go doc
is great for terminal usages, but it's hard to integrate into editors.
Fortunately we have a very useful tool called gogetdoc
, which resolves and
retrieves the AST node for the underlying node and outputs the associated doc
comment.
That's why :GoDoc
works for any kind of identifier. If you put your cursor under
sayHi()
and call :GoDoc
you'll see that it shows it as well. And if you put
it under sayYoo()
you'll see that it just outputs no documentation
for AST
nodes without doc comments.
As usual with other features, we override the default normal shortcut K
so
that it invokes :GoDoc
instead of man
(or something else). It's really easy
to find the documentation, just hit K
in normal mode!
:GoDoc
just shows the documentation for a given identifier. But it's not a
documentation explorer, if you want to explore the documentation there is
third-party plugin that does it:
go-explorer. There is an open bug to
include it into vim-go.
Sometimes you want to know what a function is accepting or returning. Or what the identifier under your cursor is. Questions like this are common and we have a command to answer it.
Using the same main.go
file, go over the Println
function and call
:GoInfo
. You'll see that the function signature is being printed in the
status line. This is really great to see what it's doing, as you don't have to
jump to the definition and check out what the signature is.
But calling :GoInfo
every time is tedious. We can make some improvements to
call it faster. As always a way of making it faster is to add a shortcut:
autocmd FileType go nmap <Leader>i <Plug>(go-info)
Now you easily call :GoInfo
by just hitting <leader>i
. But there is still
room to improve it. vim-go has a support to automatically show the information
whenever you move your cursor. To enable it add the following to your .vimrc
:
let g:go_auto_type_info = 1
Now whenever you move your cursor onto a valid identifier, you'll see that your
status line is updated automatically. By default it updates every 800ms
. This
is a vim setting and can be changed with the updatetime
setting. To change it
to 100ms
add the following to your .vimrc
set updatetime=100
Sometimes we just want to quickly see all matching identifiers. Such as variables, functions, etc.. Suppose you have the following Go code:
package main
import "fmt"
func main() {
fmt.Println("vim-go")
err := sayHi()
if err != nil {
panic(err)
}
}
// sayHi() returns the string "hi"
func sayHi() error {
fmt.Println("hi")
return nil
}
If you put your cursor on top of err
and call :GoSameIds
you'll see that
all the err
variables get highlighted. Put your cursor on the sayHi()
function call, and you'll see that the sayHi()
function identifiers all are
highlighted. To clear them just call :GoSameIdsClear
This is more useful if we don't have to call it manually every time. vim-go
can automatically highlight matching identifiers. Add the following to your
vimrc
:
let g:go_auto_sameids = 1
After restarting vim, you'll see that you don't need to call
:GoSameIds
manually anymore. Matching identifier variables are now highlighted
automatically for you.
As you know a package can consist of multiple dependencies and files. Even if you have many files inside the directory, only the files that have the package clause correctly are part of a package.
To see the files that make a package you can call the following:
:GoFiles
which will output (my $GOPATH
is set to ~/Code/Go
):
['/Users/fatih/Code/go/src/github.com/fatih/vim-go-tutorial/main.go']
If you have other files those will be listed as well. Note that this command is only for listing Go files that are part of the build. Test files will be not listed.
For showing the dependencies of a file you can call :GoDeps
. If you call it
you'll see:
['errors', 'fmt', 'internal/race', 'io', 'math', 'os', 'reflect', 'runtime',
'runtime/internal/atomic', 'runtime/internal/sys', 'strconv', 'sync',
'sync/atomic ', 'syscall', 'time', 'unicode/utf8', 'unsafe']
The previous feature was using the guru
tool under the hood. So let's talk a
little bit about guru. So what is guru? Guru is an editor integrated tool for
navigating and understanding Go code. There is a user manual that shows all the
features: https://golang.org/s/using-guru
Let us use the same examples from that manual to show some of the features we've integrated into vim-go:
package main
import (
"fmt"
"log"
"net/http"
)
func main() {
h := make(handler)
go counter(h)
if err := http.ListenAndServe(":8000", h); err != nil {
log.Print(err)
}
}
func counter(ch chan<- int) {
for n := 0; ; n++ {
ch <- n
}
}
type handler chan int
func (h handler) ServeHTTP(w http.ResponseWriter, req *http.Request) {
w.Header().Set("Content-type", "text/plain")
fmt.Fprintf(w, "%s: you are visitor #%d", req.URL, <-h)
}
Put your cursor on top of the handler
and call :GoReferrers
. This calls the
referrers
mode of guru
, which finds references to the selected identifier,
scanning all necessary packages within the workspace. The result will be a
location list.
One of the modes of guru
is also the describe
mode. It's just like
:GoInfo
, but it's a little bit more advanced (it gives us more information).
It shows for example the method set of a type if there is any. It shows the
declarations of a package if selected.
Let's continue with same main.go
file. Put the cursor on top of the URL
field or req.URL
(inside the ServeHTTP
function). Call :GoDescribe
. You'll
see a location list populated with the following content:
main.go|27 col 48| reference to field URL *net/url.URL
/usr/local/go/src/net/http/request.go|91 col 2| defined here
main.go|27 col 48| Methods:
/usr/local/go/src/net/url/url.go|587 col 15| method (*URL) EscapedPath() string
/usr/local/go/src/net/url/url.go|844 col 15| method (*URL) IsAbs() bool
/usr/local/go/src/net/url/url.go|851 col 15| method (*URL) Parse(ref string) (*URL, error)
/usr/local/go/src/net/url/url.go|897 col 15| method (*URL) Query() Values
/usr/local/go/src/net/url/url.go|904 col 15| method (*URL) RequestURI() string
/usr/local/go/src/net/url/url.go|865 col 15| method (*URL) ResolveReference(ref *URL) *URL
/usr/local/go/src/net/url/url.go|662 col 15| method (*URL) String() string
main.go|27 col 48| Fields:
/usr/local/go/src/net/url/url.go|310 col 2| Scheme string
/usr/local/go/src/net/url/url.go|311 col 2| Opaque string
/usr/local/go/src/net/url/url.go|312 col 2| User *Userinfo
/usr/local/go/src/net/url/url.go|313 col 2| Host string
/usr/local/go/src/net/url/url.go|314 col 2| Path string
/usr/local/go/src/net/url/url.go|315 col 2| RawPath string
/usr/local/go/src/net/url/url.go|316 col 2| RawQuery string
/usr/local/go/src/net/url/url.go|317 col 2| Fragment string
You'll see that we can see the definition of the field, the method set and the
URL
struct's fields. This is a very useful command and it's there if you need
it and want to understand the surrounding code. Try and experiment by calling
:GoDescribe
on various other identifiers to see what the output is.
One of the most asked questions is how to know the interfaces a type is
implementing. Suppose you have a type and with a method set of several methods.
You want to know which interface it might implement. The mode implement
of
guru
just does it and it helps to find the interface a type implements.
Just continue with the same previous main.go
file. Put your cursor on the
handler
identifier just after the main()
function. Call :GoImplements
You'll see a location list populated with the following content:
main.go|23 col 6| chan type handler
/usr/local/go/src/net/http/server.go|57 col 6| implements net/http.Handler
The first line is our selected type and the second line will be the interface it implements. Because a type can implement many interfaces it's a location list.
One of the guru
modes that might be helpful is whicherrs
. As you know
errors are just values. So they can be programmed and thus can represent any
type. See what the guru
manual says:
The whicherrs mode reports the set of possible constants, global variables, and concrete types that may appear in a value of type error. This information may be useful when handling errors to ensure all the important cases have been dealt with.
So how do we use it? It's easy. We still use the same main.go
file. Put your
cursor on top of the err
identifier which is returned from http.ListenAndServe
.
Call :GoWhicherrs
and you'll see the following output:
main.go|12 col 6| this error may contain these constants:
/usr/local/go/src/syscall/zerrors_darwin_amd64.go|1171 col 2| syscall.EINVAL
main.go|12 col 6| this error may contain these dynamic types:
/usr/local/go/src/syscall/syscall_unix.go|100 col 6| syscall.Errno
/usr/local/go/src/net/net.go|380 col 6| *net.OpError
You'll see that the err
value may be the syscall.EINVAL
constant or it also
might be the dynamic types syscall.Errno
or *net.OpError
. As you see this is
really helpful when implementing custom logic to handle the error differently if
needed. Note that this query needs a guru scope
to be set. We'll going to
cover in a moment what a scope
is and how you can change it dynamically.
Let's continue with the same main.go
file. Go is famous for its concurrency
primitives, such as channels. Tracking how values are sent between channels can
sometimes be hard. To understand it better we have the peers
mode of guru
.
This query shows the set of possible send/receives on the channel operand (send
or receive operation).
Move your cursor to the following expression and select the whole line:
ch <- n
Call :GoChannelPeers
. You'll see a location list window with the following content:
main.go|19 col 6| This channel of type chan<- int may be:
main.go|10 col 11| allocated here
main.go|19 col 6| sent to, here
main.go|27 col 53| received from, here
As you see you can see the allocation of the channel, where it's sending and receiving from. Because this uses pointer analysis, you have to define a scope.
Let us see how function calls and targets are related. This time create the
following files. The content of main.go
should be:
package main
import (
"fmt"
"github.com/fatih/vim-go-tutorial/example"
)
func main() {
Hello(example.GopherCon)
Hello(example.Kenya)
}
func Hello(fn func() string) {
fmt.Println("Hello " + fn())
}
And the file should be under example/example.go
:
package example
func GopherCon() string {
return "GopherCon"
}
func Kenya() string {
return "Kenya"
}
So jump to the Hello
function inside main.go
and put your cursor on top of
the function call named fn()
. Execute :GoCallees
. This command shows the
possible call targets of the selected function call. As you see it'll show us
the function declarations inside the example
function. Those functions are
the callees, because they were called by the function call named fn()
.
Jump back to main.go
again and this time put your cursor on the function
declaration Hello()
. What if we want to see the callers of this function?
Execute :GoCallers
.
You should see the output:
main.go| 10 col 7 static function call from github.com/fatih/vim-go-tutorial.Main
main.go| 11 col 7 static function call from github.com/fatih/vim-go-tutorial.Main
Finally there is also the callstack
mode, which shows an arbitrary path from
the root of the call graph to the function containing the selection.
Put your cursor back to the fn()
function call inside the Hello()
function.
Select the function and call :GoCallstack
. The output should be like
(simplified form):
main.go| 15 col 26 Found a call path from root to (...)Hello
main.go| 14 col 5 (...)Hello
main.go| 10 col 7 (...)main
It starts from line 15
, and then to line 14
and then ends at line 10
.
This is the graph from the root (which starts from main()
) to the function we
selected (in our case fn()
)
For most of the guru
commands you don't need to define any scope. What is a
scope
? The following excerpt is straight from the guru
manual:
Pointer analysis scope: some queries involve pointer analysis, a technique for answering questions of the form “what might this pointer point to?”. It is usually too expensive to run pointer analysis over all the packages in the workspace, so these queries require an additional configuration parameter called the scope, which determines the set of packages to analyze. Set the scope to the application (or set of applications---a client and server, perhaps) on which you are currently working. Pointer analysis is a whole-program analysis, so the only packages in the scope that matter are the main and test packages.
The scope is typically specified as a comma-separated set of packages, or wildcarded subtrees like github.com/my/dir/...; consult the specific documentation for your editor to find out how to set and vary the scope.
vim-go
automatically tries to be smart and sets the current packages import
path as the scope
for you. If the command needs a scope, you're mostly
covered. Most of the times this is enough, but for some queries you might to
change the scope setting. To make it easy to change the scope
on the fly with
have a specific setting called :GoGuruScope
If you call it, it'll return an error: guru scope is not set
. Let us change
it explicitly to the `github.com/fatih/vim-go-tutorial" scope:
:GoGuruScope github.com/fatih/vim-go-tutorial
You should see the message:
guru scope changed to: github.com/fatih/vim-go-tutorial
If you run :GoGuruScope
without any arguments, it'll output the following
current guru scope: github.com/fatih/vim-go-tutorial
To select the whole GOPATH
you can use the ...
argument:
:GoGuruScope ...
You can also define multiple packages and also subdirectories. The following
example selects all packages under github.com
and the golang.org/x/tools
package:
:GoGuruScope github.com/... golang.org/x/tools
You can exclude packages by prepending the -
(negative) sign to a package.
The following example selects all packages under encoding
but not
encoding/xml
:
:GoGuruScope encoding/... -encoding/xml
To clear the scope just pass an empty string:
:GoGuruScope ""
If you're working on a project where you have to set the scope always to the
same value and you don't want to call :GoGuruScope
everytime you start Vim,
you can also define a permanent scope by adding a setting to your vimrc
. The
value needs to be a list of string types. Here are some examples from the
commands above:
let g:go_guru_scope = ["github.com/fatih/vim-go-tutorial"]
let g:go_guru_scope = ["..."]
let g:go_guru_scope = ["github.com/...", "golang.org/x/tools"]
let g:go_guru_scope = ["encoding/...", "-encoding/xml"]
Finally, vim-go
tries to auto complete packages for you while using
:GoGuruScope
as well. So when you try to write
github.com/fatih/vim-go-tutorial
just type gi
and hit tab
, you'll see
it'll expand to github.com
Another setting that you should be aware are build tags (also called build constraints). For example the following is a build tag you put in your Go source code:
// +build linux darwin
Sometimes there might be custom tags in your source code, such as:
// +build mycustomtag
In this case, guru will fail as the underlying go/build
package will be not
able to build the package. So all guru
related commands will fail (even
:GoDef
when it uses guru
). Fortunately guru
has a -tags
flag that
allows us to pass custom tags. To make it easy for vim-go
users we have a
:GoBuildTags
For the example just call the following:
:GoBuildTags mycustomtag
This will pass this tag to guru
and from now on it'll work as expected. And
just like :GoGuruScope
, you can clear it with:
:GoBuildTags ""
And finally if you wish you can make it permanent with the following setting:
let g:go_build_tags = "mycustomtag"
Renaming identifiers is one of the most common tasks. But it's also something
that needs to be done carefully in order not to break other packages as well. Also just
using a tool like sed
is sometimes not useful, as you want AST aware
renaming, so it only should rename identifiers that are part of the AST (it
should not rename for example identifiers in other non Go files, say build
scripts)
There is a tool that does renaming for you, which is called gorename
.
vim-go
uses the :GoRename
command to use gorename
under the hood. Let us
change main.go
to the following content:
package main
import "fmt"
type Server struct {
name string
}
func main() {
s := Server{name: "Alper"}
fmt.Println(s.name) // print the server name
}
func name() string {
return "Zeynep"
}
Put your cursor on top of the name
field inside the Server
struct and call
:GoRename bar
. You'll see all name
references are renamed to bar
. The
final content would look like:
package main
import "fmt"
type Server struct {
bar string
}
func main() {
s := Server{bar: "Alper"}
fmt.Println(s.bar) // print the server name
}
func name() string {
return "Zeynep"
}
As you see, only the necessary identifiers are renamed, but the function name
or the string inside the comment is not renamed. What's even better is that
:GoRename
searches all packages under GOPATH
and renames all identifiers
that depend on the identifier. It's a very powerful tool.
Let's move to another example. Change your main.go
file to:
package main
import "fmt"
func main() {
msg := "Greetings\nfrom\nTurkey\n"
var count int
for i := 0; i < len(msg); i++ {
if msg[i] == '\n' {
count++
}
}
fmt.Println(count)
}
This is a basic example that just counts the newlines in our msg
variable. If
you run it, you'll see that it outputs 3
.
Assume we want to reuse the newline counting logic somewhere else. Let us
refactor it. Guru can help us in these situations with the freevars
mode. The
freevars
mode shows variables that are referenced but not defined within a
given selection.
Let us select the piece in visual
mode:
var count int
for i := 0; i < len(msg); i++ {
if msg[i] == '\n' {
count++
}
}
After selecting it, call :GoFreevars
. It should be in form of
:'<,'>GoFreevars
. The result is again a quickfix list and it contains all the
variables that are free variables. In our case it's a single variable and the
result is:
var msg string
So how useful is this? This little piece of information is enough to refactor it into a standalone function. Create a new function with the following content:
func countLines(msg string) int {
var count int
for i := 0; i < len(msg); i++ {
if msg[i] == '\n' {
count++
}
}
return count
}
You'll see that the content is our previously selected code. And the input to
the function is the result of :GoFreevars
, the free variables. We only
decided what to return (if any). In our case we return the count. Our main.go
will be in the form of:
package main
import "fmt"
func main() {
msg := "Greetings\nfrom\nTurkey\n"
count := countLines(msg)
fmt.Println(count)
}
func countLines(msg string) int {
var count int
for i := 0; i < len(msg); i++ {
if msg[i] == '\n' {
count++
}
}
return count
}
That's how you refactor a piece of code. :GoFreevars
can be used also to
understand the complexity of a code. Just run it and see how many variables are
dependent to it.
Code generation is a hot topic. Because of the great std libs such as go/ast, go/parser, go/printer, etc.. Go has the advantage of being able to create great generators easily.
First we have the :GoGenerate
command that calls go generate
under the
hood. It just works like :GoBuild
, :GoTest
, etc.. If there are any errors it
also shows them so you can easily fix it.
Interfaces are really great for composition. They make your code easier to deal with. It's also easier for you to create tests as you can mock functions that accept an interface type with a type that implements methods for testing.
vim-go
has support for the tool impl.
impl
generates method stubs that implement a given interface. Let us change
main.go
's content to the following:
package main
import "fmt"
type T struct{}
func main() {
fmt.Println("vim-go")
}
Put your cursor on top of T
and type :GoImpl
. You'll be prompted to write
an interface. Type io.ReadWriteCloser
and hit enter. You'll see the content
changed to:
package main
import "fmt"
type T struct{}
func (t *T) Read(p []byte) (n int, err error) {
panic("not implemented")
}
func (t *T) Write(p []byte) (n int, err error) {
panic("not implemented")
}
func (t *T) Close() error {
panic("not implemented")
}
func main() {
fmt.Println("vim-go")
}
That's really neat as you see. You can also just type :GoImpl io.ReadWriteCloser
when you're on top of a type and it'll do the same.
But you don't need to put your cursor on top of a type. You can invoke it from everywhere. For example execute this:
:GoImpl b *B fmt.Stringer
You'll see the following will be created:
func (b *B) String() string {
panic("not implemented")
}
As you see this is very helpful, especially if you have a large interface with
large method set. You can easily generate it, and because it uses panic()
this compiles without any problem. Just fill the necessary parts and you're
done.
vim-go
has also features to easily share your code with other via
https://play.golang.org/. As you know the Go playground is a perfect place to
share small snippets, exercises and/or tips & tricks. There are times you are
playing with an idea and want to share with others. You copy the code and visit
play.golang.org and then paste it. vim-go
makes all these better with the
:GoPlay
command.
First let us change our main.go
file with the following simple code:
package main
import "fmt"
func main() {
fmt.Println("vim-go")
}
Now call :GoPlay
and hit enter. You'll see that vim-go
automatically
uploaded your source code :GoPlay
and also opened a browser tab that shows
it. But there is more. The snippet link is automatically copied to your
clipboard as well. Just paste the link to somewhere. You'll see the link is the
same as what's on play.golang.org.
:GoPlay
also accepts a range. You can select a piece of code and call
:GoPlay
. It'll only upload the selected part.
There are two settings to tweak the behavior of :GoPlay
. If you don't like
that vim-go
opens a browser tab for you, you can disable it with:
let g:go_play_open_browser = 0
Secondly, if your browser is misdetected (we're using open
or xdg-open
) you
can manually set the browser via:
let g:go_play_browser_command = "chrome"
By default syntax highlighting for Go HTML template is enabled for .tmpl
files.
If you want to enable it for another filetype add the following setting to your .vimrc
:
au BufRead,BufNewFile *.gohtml set filetype=gohtmltmpl
This tutorial was created by me in my spare time. If you like it and would like to donate, you now you can be a fully supporter by being a patron!
By being a patron, you are enabling vim-go to grow and mature, helping me to invest in bug fixes, new documentation, and improving both current and future features. It's completely optional and is just a direct way to support vim-go's ongoing development. Thanks!
- :GoPath
- :AsmFmt