This is a proxy and manage layer used for ip-pool based on nginx.

In our case, our ip-pool is deployed on a nginx server with hundreds of IPs, who plainly takes proxy and sends out requests through one of its IP.

But managing IP availabiliy from nginx is restricted, this is what this program used for.

IPManager Features:

• Easy and small. Heap consumption managing 300 IPs with 1000 * 300 logs:
• Stateless, easy to scale. No database required. All the status are stored in nginx log.

This is a monitor and load-balancer for ip-pool with huge amount of ip.

ipmanager is parsing accesslog of nginx with regex to fetch history of each ip, and load balance requests to available IPs dynamically and apparently.

First, with config.UpstreamConfPath given, the program would read and parse ips to build a full ip list during initialization. And it scans config.AccessLogPath for requests behavior.

Scanned request records are reserved in IP.IP.History []*Entry and can be access with GET HOST.com/probe. Every config.ScanInterval time the program will scan the log for newly incoming requests logs and update the history of each ip as well as available IP list to tune its load-balancing strategy.

With request comes in, the program select an IP and send it to the port

At will, you'll possibly be able to take a look and analyse the behavior of upstream ips with promethuse and your favorate visualization plane.

Build from source and run with:

cd ipmanager
go version
env GO111MODULE=on go build -o ipmanager
./ipmanager --config [absolute/full/path/to/config.json]

Note:

1. This package by default requires go 1.18 or higher
2. For nginx log is protected by default, you may want to run it with sudo.

At this time, /metric router for prometheus is automatically enabled. You can access it with HOST.com/metric and use your favorite visualization plane to monitor the behavior of upstream ips.

Add following config to your prometheus.yml.

- job_name: 'ipmanager'
  metrics_path: '/metric'
  scrape_interval: 60s
  static_configs:
  - targets: ['HOST.com:PROBE_PORT']

And reboot prometheus to apply. If you are using grafana, you can easily adopt the dashboard from ipmanager/additional/grafana-dashboard.json.

Example configuration file built in with default value:

{
  "mode": "serve",
  "debug": true,
  "probe_port": "9095",
  "proxy_port": "9096",
  "next": "127.0.0.1",
  "scan_interval_min": 5,
  "access_log_path": "/var/log/nginx/host.access.log",
  "upstream_conf_path": "/etc/nginx/conf.d/001-upstream.conf",
  "max_history_log_each_ip": 1000,
  "max_cool_down_log_each_ip": 1000,
  "cool_down_min": 10,
  "dial_timeout": 15,
  "max_connection_timeout": 100,
  "strategy": "consecutive",
  "consecutive_failure": 3
}

• mode: Enum of serve and parse.
  • parse: The program parses the log after last rotate and continue to serve.
  • serve: The program do not take a look at the last rotate, but cares only about the later requests. It may take some failure to make the Available IPs converge.
• debug: Causes verbose logging.
• probe_port: The port for probe. Router /probe /ping and /config is available.
• next: The nginx entry of upstreams.
• max_history_log_each_ip: The maximum number of history logs for each ip. You are suggested to set this value according to the size of ip pool and available space. The size of json you get from curl, you can estimate with formula max_history_log_each_ip * len(ip_pool) / 10 (KB).

Use proxy:

curl -X [METHOD] yourhost.example.com:proxy_port \
-H "Host: nginxServerHost.example.com"  \
-H "X-Egress-Scheme: https" \
-H "X-Egress-Host: target.example.com[:port]" \
-H "X-Egress-Key: SomeNonEmptyStringForLoadBalance"   \

During this request:

• Client curl visit ipmanager on yourhost.example.com
• IPmanager select an available ip from the pool, build a tcp connection and transparently send to the nginx server pointed by next in config.
• Nginx sends the request to the target server from the IP selected.
• You are done with proxy.

Fetch all ip status:

curl -X GET youhost.example.com:probe_port/api/ip/history

Fetch current config:

curl -X GET youhost.example.com:probe_port/api/config

Trigger renew IP history:

curl -X POST youhost.example.com:probe_port/api/ip/renew

Prometheus metrics:

curl -X GET youhost.example.com:probe_port/metrics

Check performance. You may install pprof first:

pprof -http=:9099 https://youhost.example.com:probe_port/debug/pprof/(heap|allocs|goroutine|threadcreate|block|mutex)

All files it fetched is parsed with regex, and the regex is defined in ip/scanner.go. With logging style changes and other possibly change, you may want to modify the regex by your own.

For now, load-balancing is naive: random. You can extend it on your own.

The proxy is meant to be apparent and supporting only tcp.

IP are classified as:

Available
Unavailable

You may want to control the switching condition of IPs on your own. The control config.strategy is defined in ip/strategy.go and selected by configuration file.

Fow now, only consecutive mode is supported. Which means:

• An ip would be marked as Unavailable if it consecutively fails config.consecutive_failure times in 5 minutes.
• An ip would be marked as Available if it has been banned for config.Cooldown minutes.

You may want to extend:

• Parsing regex in: ip/scanner.go
• Load-Balancing strategy: Web/server.go
• IP banning and cool down strategy: ip/strategy.go

For more extensibility, you can raise an issue to let me know.

TODO: Add debug tracing to upstream. Which one has the very last request been sent to? TODO: Make performance test and tune. TODO: Fetch history by batches of ip. TODO: Manually ban or unban certain ip.