Forked from:git:https://flatbed.openfabrics.org/~grockah/perftest.git
Dependencies: libnl: https://github.com/thom311/libnl.git libibverbs: git:https://git.kernel.org/pub/scm/libs/infiniband/libibverbs.git librdmacm: git:https://flatbed.openfabrics.org/~shefty/librdmacm.git libibumad: git:https://flatbed.openfabrics.org/~sashak/libibumad.git
etc.. Open Fabrics Enterprise Distribution (OFED) Performance Tests README for OFED 2.4
December 2014
- Overview
- Notes on Testing Methodology
- Test Descriptions
- Running Tests
- Known Issues
===============================================================================
- Overview =============================================================================== This is a collection of tests written over uverbs intended for use as a performance micro-benchmark. The tests may be used for HW or SW tuning as well as for functional testing.
The collection contains a set of bandwidth and latency benchmark such as:
* Send - ib_send_bw and ib_send_lat
* RDMA Read - ib_read_bw and ib_read_lat
* RDMA Write - ib_write_bw and ib_wriet_lat
* RDMA Atomic - ib_atomic_bw and ib_atomic_lat
* Native Ethernet (when working with MOFED2) - raw_ethernet_bw, raw_ethernet_lat
Please post results/observations to the openib-general mailing list. See "Contact Us" at https://openib.org/mailman/listinfo/openib-general and https://www.openib.org.
=============================================================================== 2. Notes on Testing Methodology
-
The benchmarks use the CPU cycle counter to get time stamps without context switch. Some CPU architectures (e.g., Intel's 80486 or older PPC) do not have such capability.
-
The latency benchmarks measure round-trip time but report half of that as one-way latency. This means that the results may not be accurate for asymmetrical configurations.
-
On all unidirectional bandwidth benchmarks, the client measures the bandwidth. On bidirectional bandwidth benchmarks, each side measured the bandwidth of the traffic it initiates, and at the end of the measurement period, the server reports the result to the client, who combines them together.
-
Latency tests report minimum, median and maximum latency results. The median latency is typically less sensitive to high latency variations, compared to average latency measurement. Typically, the first value measured is the maximum value, due to warmup effects.
-
Long sampling periods have very limited impact on measurement accuracy. The default value of 1000 iterations is pretty good. Note that the program keeps data structures with memory footprint proportional to the number of iterations. Setting a very high number of iteration may have negative impact on the measured performance which are not related to the devices under test. If a high number of iterations is strictly necessary, it is recommended to use the -N flag (No Peak).
-
Bandwidth benchmarks may be run for a number of iterations, or for a fixed duration. Use the -D flag to instruct the test to run for the specified number of seconds. The --run_infinitely flag instructs the program to run until interrupted by the user, and print the measured bandwidth every 5 seconds.
-
The "-H" option in latency benchmarks dumps a histogram of the results. See xgraph, ygraph, r-base (https://www.r-project.org/), PSPP, or other statistical analysis programs.
*** IMPORTANT NOTE: When running the benchmarks over an Infiniband fabric, a Subnet Manager must run on the switch or on one of the nodes in your fabric, prior to starting the benchmarks.
Architectures tested: i686, x86_64, ia64
=============================================================================== 3. Benchmarks Description
The benchmarks generate a synthetic stream of operations, which is very useful for hardware and software benchmarking and analysis. The benchmarks are not designed to emulate any real application traffic. Real application traffic may be affected by many parameters, and hence might not be predictable based only on the results of those benchmarks.
ib_send_lat latency test with send transactions ib_send_bw bandwidth test with send transactions ib_write_lat latency test with RDMA write transactions ib_write_bw bandwidth test with RDMA write transactions ib_read_lat latency test with RDMA read transactions ib_read_bw bandwidth test with RDMA read transactions ib_atomic_lat latency test with atomic transactions ib_atomic_bw bandwidth test with atomic transactions
Raw Ethernet interface benchmarks: raw_ethernet_send_lat latency test over raw Etherent interface raw_ethernet_send_bw bandwidth test over raw Etherent interface
Prerequisites: kernel 2.6 (kernel module) matches libibverbs (kernel module) matches librdmacm (kernel module) matches libibumad (kernel module) matches libmath (lm).
Server: ./ Client: ./
o <server address> is IPv4 or IPv6 address. You can use the IPoIB
address if IPoIB is configured.
o --help lists the available <options>
*** IMPORTANT NOTE: The SAME OPTIONS must be passed to both server and client.
-h, --help Display this help message screen -p, --port= Listen on/connect to port (default: 18515) -R, --rdma_cm Connect QPs with rdma_cm and run test on those QPs -z, --com_rdma_cm Communicate with rdma_cm module to exchange data - use regular QPs -m, --mtu= QP Mtu size (default: active_mtu from ibv_devinfo) -c, --connection=<RC/UC/UD/XRC/DC> Connection type RC/UC/UD/XRC/DC (default RC). -d, --ib-dev= Use IB device (default: first device found) -i, --ib-port= Use network port of IB device (default: 1) -s, --size= Size of message to exchange (default: 1) -a, --all Run sizes from 2 till 2^23 -n, --iters= Number of exchanges (at least 100, default: 1000) -x, --gid-index= Test uses GID with GID index taken from command -V, --version Display version number -e, --events Sleep on CQ events (default poll) -F, --CPU-freq Do not fail even if cpufreq_ondemand module -I, --inline_size= Max size of message to be sent in inline mode -u, --qp-timeout= QP timeout = (4 uSec)*(2^timeout) (default: 14) -S, --sl= Service Level (default 0) -r, --rx-depth= Receive queue depth (default 600)
-C, --report-cycles Report times in CPU cycle units -H, --report-histogram Print out all results (Default: summary only) -U, --report-unsorted Print out unsorted results (default sorted)
-b, --bidirectional Measure bidirectional bandwidth (default uni) -N, --no peak-bw Cancel peak-bw calculation (default with peak-bw) -Q, --cq-mod Generate Cqe only after completion -t, --tx-depth= Size of tx queue (default: 128) -O, --dualport Run test in dual-port mode (2 QPs). Both ports must be active (default OFF) -D, --duration= Run test for period of seconds -f, --margin= When in Duration, measure results within margins (default: 2) -l, --post_list= Post list of WQEs of size (instead of single post) -q, --qp=<num of qp's> Num of QPs running in the process (default: 1) --run_infinitely Run test until interrupted by user, print results every 5 seconds
-r, --rx-depth= Size of receive queue (default: 512 in BW test) -g, --mcg=<num_of_qps> Send messages to multicast group with <num_of_qps> qps attached to it -M, --MGID=<multicast_gid> In multicast, uses <multicast_gid> as the group MGID
-A, --atomic_type= type of atomic operation from {CMP_AND_SWAP,FETCH_AND_ADD} -o, --outs= Number of outstanding read/atomic requests - also on READ tests
-B, --source_mac source MAC address by this format XX:XX:XX:XX:XX:XX (default take the MAC address form GID) -E, --dest_mac destination MAC address by this format XX:XX:XX:XX:XX:XX MUST be entered -J, --server_ip server ip address by this format X.X.X.X (using to send packets with IP header) -j, --client_ip client ip address by this format X.X.X.X (using to send packets with IP header) -K, --server_port server udp port number (using to send packets with UPD header) -k, --client_port client udp port number (using to send packets with UDP header) -Z, --server choose server side for the current machine (--server/--client must be selected) -P, --client choose client side for the current machine (--server/--client must be selected)
-
Usage of post_list feature (-l, --post_list=). In this case, each QP will prepare ibv_send_wr (instead of 1), and will chain them to each other. In chaining we mean allocating <list_size> array, and setting 'next' pointer of each ibv_send_wr in the array to point to the following element in the array. the last ibv_send_wr in the array will point to NULL. In this case, when post sending the first ibv_send_wr in the list, will instruct the HW to post all of those WQEs. Which means each post_send will post <list_size> messages. This feature is good we want to know the maximum message rate of QPs in a single process. Since we are limited to SW post_send (~ 10 Mpps, since we have ~ 500 ns between each SW post_send), we can see the true HW message rate when setting <list_size> of 64 (for example) since it's not depended on SW limitations.
-
RDMA Connected Mode (CM) You can add the "-R" flag to all tests to connect the QPs from each side with the rdma_cm library. In this case, the library will connect the QPs and will use the IPoIB interface for doing it. It helps when you don't have Ethernet connection between the 2 nodes. You must supply the IPoIB interface as the server IP.
-
Multicast support in ib_send_lat and in ib_send_bw Send tests have built in feature of testing multicast performance, in verbs level. You can use "-g" to specify the number of QPs to attach to this multicast group. "-M" flag allows you to choose the multicast group address.
-
Multicast support in ib_send_lat and in ib_send_bw is not stable. The benchmark program may hang or exhibit other unexpected behavior.
-
Bidirectional support in ib_send_bw test, when running in UD or UC mode. In rare cases, the benchmark program may hang. perftest-2.3 release includes a feature for hang detection, which will exit test after 2 mins in those situations.
-
Different versions of perftest may not be compatible with each other. Please use the same perftest version on both sides to ensure consistency of benchmark results.
-
Test version 5.3 and above won't work with previous versions of perftest.
-
This perftest package won't compile on MLNX_OFED-2.1 due to API changes in MLNX_OFED-2.2 In order to compile it properly, please do: ./configure --disable-verbs_exp make
-
In te x390x platform virtualized environment the results shown by package test applications can be incorrect.
-
perftest-2.3 release includes support for dualport VPI test - port1-Ethernet , port2-IB. (in addition to Eth:Eth, IB:IB) Currently, running dualport when port1-IB , port2-Ethernet still not working.
-
for postlist, tests will not finish correctly when using iterations and num_iters/poslist_val has a remainder.