Add disclaimer for new device support

README.md

@@ -5,17 +5,6 @@ The `tplink_router` platform for `device_tracker` integration allows you to dete
 
 It was part of the official `tplink` integration in the past but was [removed](https://github.com/home-assistant/core/pull/27936) from Home Assistant.
 
-Devices originally supported include the following:
-
-- Archer C7 firmware version 150427
-- Archer C9 firmware version 150811
-- EAP-225 AP with latest firmware version
-- Archer D9 firmware version 0.9.1 0.1 v0041.0 Build 160224 Rel.59129n
-
-Additional devices added since the removal from Home Assistant:
-
-- TPLink N600
-
 ## Installation
 Recommended: use [HACS](https://hacs.xyz/).
 
@@ -25,7 +14,7 @@ Manual: copy `custom_components/tplink_router` folder into your `custom_componen
 TP-Link devices typically only allow one login at a time to the admin console. This integration will count towards your one allowed login. Depending on how aggressively you configure device_tracker you may not be able to access the admin console of your TP-Link device without first stopping Home Assistant. Home Assistant takes a few seconds to login, collect data, and log out. If you log into the admin console manually, remember to log out so that Home Assistant can log in again.
 </div>
 
-### Configuration
+## Configuration
 
 To enable this device tracker, add the following lines to your `configuration.yaml`:
 
@@ -55,4 +44,21 @@ For Archer C9 models running firmware version 150811 or later please use the enc
 
 See the [device tracker integration page](/integrations/device_tracker/) for instructions how to configure the people to be tracked.
 
-For Archer D9 model the default IP is 192.168.1.1, the username is not necessary and you can leave that field blank.
+For Archer D9 model the default IP is 192.168.1.1, the username is not necessary and you can leave that field blank.
+
+## Supported devices
+
+Devices originally supported include the following:
+
+- Archer C7 firmware version 150427
+- Archer C9 firmware version 150811
+- EAP-225 AP with latest firmware version
+- Archer D9 firmware version 0.9.1 0.1 v0041.0 Build 160224 Rel.59129n
+
+Additional devices added since the removal from Home Assistant:
+
+- TPLink N600 with latest firmware
+
+If your device is not in the list, you can still give it a try and let me know if it works or not, I'll update the documentation.
+
+*Disclaimer*: I cannot add support for devices I don't own, unless you provide me with a list of HTTP requests leading to the page listing MAC address of connected devices, including authentication, and an example of the page.

info.md

@@ -20,5 +20,16 @@ device_tracker:
  password: !secret tplink_router_password
 ```
 
+## Supported devices
+- Archer C7 firmware version 150427
+- Archer C9 firmware version 150811
+- EAP-225 AP with latest firmware version
+- Archer D9 firmware version 0.9.1 0.1 v0041.0 Build 160224 Rel.59129n
+- TPLink N600 with latest firmware (added since removal of the integration from Home Assistant)
+
+If your device is not in the list, you can still give it a try and let me know if it works or not, I'll update the documentation.
+
+*Disclaimer*: I cannot add support for devices I don't own, unless you provide me with a list of HTTP requests leading to the page listing MAC address of connected devices, including authentication, and an example of the page.
+
 ## Documentation
 See [README](https://github.com/ericpignet/home-assistant-tplink_router/blob/master/README.md) for full documentation.