This Verilog core exports an SD card controller interface from internal to an FPGA to the rest of the FPGA core, while taking care of the lower level details internal to the interface. Unlike the other OpenCores SD Card controller which offers a full SD interface, this controller focuses on the SPI interface of the SD Card. While this is a slower interface, the SPI interface is necessary to access the card when using a XuLA2 board, or in general any time the full 9--bit, bi--directional interface to the SD card has not been implemented. Further, for those who are die--hard Verilog authors, this core is written in Verilog as opposed to the XESS provided demonstration SD Card controller found on GitHub, which was written in VHDL. For those who are not such die--hard Verilog authors, this controller provides a lower level interface to the card than these other controllers. Whereas the XESS controller will automatically start up the card and interact with it, this controller requires external software to be used when interacting with the card. This makes this SDSPI controller both more versatile, in the face of potential changes to the card interface, but also less turn-key.

While this core was written for the purpose of being used with the ZipCPU, as enhanced by the Wishbone DMA controller used by the ZipCPU, nothing in this core prevents it from being used with any other architecture that supports the 32-bit Wishbone interface of this core.

This core has been written as a wishbone slave, not a master. Using the core together with a separate master, such as a CPU or a DMA controller, only makes sense. This design choice, however, also restricts the core from being able to use the multiple block write or multiple block read commands, restricting us to single block read and write commands alone.

For more information, please consult the specification document.

Now that I have an initial SD Card controller working over the SPI port, I've kind of fallen in love with the simple interface it uses. I'm wondering if I can use the same control interface for the full SD protocol. To that end, I intend to build a version of this controller that works with the full SD protocol--even integrating a card detect bit into the control register.

Should you find the GPLv3 license insufficient for your needs, other licenses can be purchased from Gisselquist Technology, LLC.