Skip to content

ekosynth/CEM3396

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CEM3396

Figuring out how to make use of surplus CEM3396 chips cem 3396 chip

Overview

Introduction to CEM3396

The CEM3396 is a microprocessor controlled dual waveshaper with an integral VCF and VCA. It was manufactured in 1984 by Curtis Electromusic Specialities. As far as Google knows, it was only use in the following three synths:

Synths that use the CEM3396

  • Cheetah MS6
  • Oberheim Matrix-6 & Matrix 6-R
  • Oberheim Matrix-1000 (narrow version)

Making a testbed for the CEM3396

cem 3396 circuit

Power

The datasheet recommends an unconventional ideal power supply of +12V positive and -5V negative. However, it mentions the chip can tolerate a maximum of 25V across the rails. Thus for the purposes of experimenting +/-12V is usable.

There are 11 control voltage inputs and they require 0-5V input. Thus a 5V supply will also be required. This could be most easily achieved using a 7805 regulator on the +12V supply.

Oscillator

The CEM3396 contains waveshaping circuitry, but not oscillating circuitry. Thus an external source of oscillation and frequency control is required.

The Oberheim Matrix-1000 used a crystal oscillator that oscillates at (how many?)MHz which is divided down to the required frequency by an 82C54 programmable interval timer.

About

Figuring out how to make use of surplus CEM3396 chips

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published