Skip to content

edneville/please

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Please, a sudo alternative

Delegate accurate least privilege access with ease. Express easily with a regex and expose only what is needed and nothing more. Or validate file edits with pleaseedit.

Admin your box without giving users full root shells, most admins have experience of regex in one form or another, so lets configure access that way.

I saw regex but don't like regex. No problem, you can still use please and pleaseedit without regex by using exact_ counterparts, or treat each field/property as plain text, and escape control characters ?(){}[]+ etc. Most of the regex match statements have exact counterparts.

Please is written with memory safe rust. Traditional C memory unsafety is avoided, logic problems may exist but this codebase is relatively small.

How do I install it

It might already be in the repo that you're using:

Packaging status

If not, it is a simple install:

git clone https://gitlab.com/edneville/please.git
cd please
cargo test && cargo build --release \
&& install -o 0 -g 0 -m4755 target/release/please target/release/pleaseedit /usr/local/bin

Arch:

pacman -Syu git fakeroot devtools binutils gcc rust 
git clone https://[email protected]/pleaser.git
cd pleaser && makepkg -isr

Debian/Ubuntu:

apt install pleaser

Fedora (35):

dnf install pleaser

NetBSD:

pkgin install pleaser

SUSE Tumbleweed:

zypper install pleaser

RHEL 7 (EPEL):

yum install cargo git pam-devel
git clone 'https://gitlab.com/edneville/please.git'
cd please/
cargo test && cargo build --release && install -oroot -groot -D -m4755 target/release/please target/release/pleaseedit /usr/local/bin

Optionally, set sudo as an alias of please:

alias sudo="please"
alias sudoedit="pleaseedit"

Or, if you like, symlink in local:

cd /usr/local/bin && ln -s /usr/local/bin/please sudo && ln -s /usr/local/bin/pleaseedit sudoedit

How do I set it up

You may need to configure PAM if you didn't use a distro package in order for require_pass to authenticate. Debian-based needs something similar to this in /etc/pam.d/please and /etc/pam.d/pleaseedit:

#%PAM-1.0

# Set up user limits from /etc/security/limits.conf.
session    required   pam_limits.so

@include common-auth
@include common-account
@include common-session-noninteractive

Red Hat based needs something similar to this in the same files:

#%PAM-1.0
auth       include      system-auth
account    include      system-auth
password   include      system-auth
session    optional     pam_keyinit.so revoke
session    required     pam_limits.so
session    include      system-auth

Next, configure your /etc/please.ini, replace user names with appropriate values. The ini is divided into section options, matches and actions.

Section options

Part Effect
[section-name] Section name, shown in list mode
include=file Include file as another ini source, other options will be skipped in this section.
includedir=dir Include dir of .ini files as other sources, in ascii sort order other options will be skipped in this section. Files not matching .ini will be ignored to allow for editor tmp files.

include and includedir will override mandatory arguments.

Matches

One of the simplest, that does not require password authentication can be defined as follows, assuming the user is jim:

The options are as follows:

Part Effect
name=regex Mandatory, apply configuration to this entity.
target=regex May become these users.
rule=regex This is the command regex for the section, default is ^$
notbefore=YYYYmmdd The date, or YYYYmmddHHMMSS when this rule becomes effective.
notafter=YYYYmmdd The date, or YYYYmmddHHMMSS when this rule expires.
datematch=[Day dd Mon HH:MM:SS UTC YYYY] regex to match against a date string
type=[edit/run/list] Set the entry type, run = execution, edit = pleaseedit, list = show user rights
group=[true/false] True to signify that name= refers to a group rather than a user.
hostname=regex Hosts where this applies, defaults to 'localhost'.
target_group=regex When set a group must be provided that matches
dir=regex Permit switching to regex defined directory prior to execution.
permit_env=regex When combined with -a, permit matching environments keys
search_path=string Change search_path to : separated directory list

Exact counterparts, which must match exactly. When both regex and exact rules are present, the exact rule match will have precedence.

Part Effect
exact_name=string Match this exact name
exact_hostname=string Match this exact hostname
exact_target=string Match this exact target user
exact_target_group=string Match this exact target group
exact_rule=string Match this exact rule
exact_dir=string Match this exact directory

Actions

Part Effect
permit=[true/false] Defaults to true
require_pass=[true/false] Defaults to true
last=[true/false] When true, stop processing when matched, defaults to false
reason=[true/false/regex] When set, require a reason provided by -r, defaults to false
timeout=[number] How long to wait for password input, in whole seconds
syslog=[true/false] Log this activity to syslog, default = true
token_timeout=[number] How long the authentication token is valid for, in whole seconds
env_assign.key=value Force environment key to be assigned value
exitcmd=[program] (pleaseedit) Continue with file replacement if program exits 0
editmode=[octal mode/keep] (pleaseedit) Set destination file mode to octal mode, or keep the mode of an existing file. If the file is not present, or mode is not declared, then mode falls back to 0600. If there is a file present, then the mode is read and used just prior to file rename

Using a greedy .* for the regex field will be as good as saying the rule should match any command. In previous releases there was no anchor (^ and $) however, it seems more sensible to follow find's approach and insist that there are anchors around the regex. This avoids /bin/bash matching /home/user/bin/bash.

If a include directive is met, no other entries in the section will be processed. The same goes for includedir.

The ordering of rules matters. The last match will win. Set permit=false if you wish to exclude something, but this should be very rare as the permit should be against a regex rather than using a positive and then a negative match. A rule of best practice is to avoid a fail open and then try and exclude most of the universe.

For example, using the two entries below:

[jim_root_du]
name = jim
target = root
permit = true
rule = ^(/usr)?/bin/du (/home/[a-z0-9-]+\s?)+
require_pass=false
[jim_postgres]
name = jim
target = postgres
permit = true
rule = /bin/bash
require_pass = false

Would permit running du, as /usr/bin/du or /bin/du as root:

$ please du /home/*

And would also permit running a bash shell as postgres:

$ please -t postgres /bin/bash
postgres$

Date ranges

For large environments it is not unusual for a third party to require access during a short time frame for debugging. To accommodate this there are the notbefore and notafter time brackets. These can be either YYYYMMDD or YYYYMMDDHHMMSS.

The whole day is considered when using the shorter date form of YYYYMMDD.

Many enterprises may wish to permit access to a user for a limited time only, even if that individual is in the role permanently.

Date matches

Another date type is the datematch item, this constrains sections to a regex match against the date string Day dd Mon HH:MM:SS UTC Year.

You can permit some a group of users to perform some house keeping on a Monday:

[l2_housekeeping]
name = l2users
group = true
target = root
permit = true
rule = /usr/local/housekeeping/tidy_(logs|images|mail)
datematch = ^Mon.*

Default sections

When a matching section name begins with default the actions will remain set until overwritten by another matching section. It is important to note that permit=true will be set implicitly on matches, therefore, unless there is good reason, set permit=false in default sections and permit=true in subsequent matching sections. See please.ini for further details.

pleaseedit

pleaseedit enables editing of files as another user. Enable editing rather than execution with type=edit. The first argument will be passed to EDITOR.

By default file permission bits will mirror existing file permissions.

This is performed as follows:

  1. user runs edit as pleaseedit -u root /etc/fstab
  2. /etc/fstab is copied to /tmp/pleaseedit.$USER.r8cYph9h._etc_fstab
  3. user's EDITOR is executed against /tmp/pleaseedit.$USER.r8cYph9h._etc_fstab
  4. if EDITOR exits 0, and exitcmd exits 0, then /tmp/pleaseedit.$USER.r8cYph9h._etc_fstab is copied to /etc/fstab.llD3wRQB.pleaseedit.copy.$USER
  5. /etc/fstab.llD3wRQB.pleaseedit.copy.$USER is set as (target) root owned and renamed to /etc/fstab

exitcmd

exitcmd can be used prior to the tmp edit file move to the source location. This can be used to test configuration files are valid prior to renaming in place.

For something similar to apache, consider copying the config tree to a tmp directory before running the test to accommodate includes.

Other examples

Members of the audio group may remove temporary users that an application may not have cleaned up in the form of username_tmp.<10 random alphanumerics> using userdel:

[user_remove_tmp_user]
name = audio
group = true
permit = true
require_pass = false
rule = /usr/sbin/userdel -f -r %{USER}_tmp\.[a-zA-Z0-9]{10}

How about, for the purpose of housekeeping, some users may be permitted to destroy zfs snapshots that look roughly like they're date stamped:

[user_remove_snapshots]
name = data
group = true
permit = true
require_pass = false
rule = /usr/sbin/zfs destroy storage/photos@\d{8}T\d{6}

To list what you may or may not do:

$ please -l
You may run the following:
  file: /etc/please.ini
    ed_root_list:root: ^.*$
You may edit the following:
  file: /etc/please.ini
    ed_edit_ini:root: ^/etc/please.ini$

The above output shows that I may run anything and may edit the please.ini configuration.

Or, perhaps any user who's name starts admin may execute useradd and userdel:

[admin_users]
name = admin_\S+
permit = true
require_pass = false
rule = /usr/sbin/user(add -m|del) \S+

Files

/etc/please.ini

Big installs

For big installs, consider the following:

Consolidate

Where you can use groups when all member least privilege matches the set. It is best here to consider that people often perform the same role, so try and organise the rules that way, so use either a group or list accounts in a single name regex match.

Central configuration considerations

To avoid single points of failure in a service, ini configuration should be generated in a single location and pushed to installs. ini files parse very quickly whilst accessing LDAP is not only slower but also error prone.

It could be possible to use caching, but a form of positive (correct match) and negative (incorrect match) would be required. 10,000 computers with hundreds of active users performing lookups against an LDAP server could be problematic.

For these reasons I prefer rsync distribution as the protocol is highly efficient and reduces network transfer overall.

LDAP may at a later date be reconsidered.

Contributions

Should you find anything that you feel is missing, regardless of initial design, please feel free to raise an issue with or without a pull request.

Locating bugs and logging issues are very appreciated, and I thank you in advance.

I welcome pull requests with open arms.

Locations

The source code for this project is currently hosted on gitlab and mirrored to github. There is a crate on crates.io. It also has a homepage where other project information is kept.

Why pleaser in some circles?

This project is named "please". In some places that project name was used by others for other things. Some packages will be named pleaser, some will be named please. The only important thing is if you wish someone to make you a sandwich, just say "please" first.