This is a C library for the SHT1X Temperature-Humidity sensor for esp-idf framework
This code is taken from: sht1x-library-Arduino and https://github.com/practicalarduino/SHT1x, and it was modified for the esp-idf framework https://github.com/sanket2994/sht1x-library-Arduino
$ git clone https://github.com/danielTobon43/sht1x_esp32_idf_library.git
$ idf.py build
$ idf.py -p <port number> -b <baud frenq> flash monitor
e.g.
idf.py build && idf.py -p /dev/ttyUSB0 -b 115200 flash monitor
Output example:
~~~~~~~~~~~~~~~~~
SHT1X Sensor
~~~~~~~~~~~~~~~~~
-> setting data pin 27
-> setting sck pin 2
***************************
-> Temperature: 21.11 °C
-> Temperature: 70.03 F
-> Humidity: -12.09%
-> Temperature: 21.10 °C
-> Temperature: 70.02 F
-> Humidity: -12.09%
1. copy sht1x.c in your src folder
2. copy sht1x.h in your include folder
3. set the sht1x.c in your CMakeLists.txt on your main folder
e.g.
set(srcs "src/main.c"
"src/sht1x.c"
)
idf_component_register(SRCS ${srcs} INCLUDE_DIRS "." )
4. set the include directory on your top CMakeLists.txt on your root project
e.g.
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
include_directories ("${CMAKE_SOURCE_DIR}/main/include")
5. set the include header on your main program
e.g.
#include "include/sht1x.h"
