- Introduction
- What are the benefits?
- Features
- Requirements
- How to get&run it?
- Where is the profit coming from?
- How to run NiceHash Miner Legacy only when profitability is high enough?
- Additional options
- Troubleshooting
- How to report bugs and issues?
- References
NiceHash Miner Legacy is a continuation of NiceHash Miner v1. This version is intended for experienced miners who want the quickest updates and highest hashrates, and are okay with some customization of the software and antivirus. If you are new to mining, please check out the new NiceHash Miner v2 for a simpler start at earning Bitcoins with your idle GPU & CPU.
Please follow us on Twitter @NiceHashMining for updates on new versions and other important information.
NiceHash Miner Legacy is an advanced auto-miner that supports the latest algorithms and miners. No need to go through tons of configuration files, various mining software versions, configuration tuning or cryptocurrency coins market analysis. Auto-tuning for best performance and efficiency, automatic selection and runtime automatic switching to most profitable cryptocurrency algorithm are all integrated into NiceHash Miner Legacy and will enable you seamless, joyful and profitable mining experience.
- Easy one-click CPU mining for CPUs that support at least SSE2 (only works on Windows x64).
- Easy one-click GPU mining for NVIDIA GPUs using microarchitecture (compute capability) SM 2.1/3.x/5.x/6.x.
- Easy one-click GPU mining for AMD GPUs using any AMD GPU devices that supports OpenCL.
- Support for multiple CPUs on multiple NUMAs with affinity adjustments to maximize mining speed.
- Integrated support for Simple Multi-Algorithm. Always mine most profitable algorithm.
- Integrated benchmarking tool. Run it only once before you start mining and after every hardware/driver/software upgrade.
- Optimized algorithms for AVX2 and AVX (CPU mining).
- Watch-feature - automatically restart miner if crashed or hanged.
- Display current rate and your balance in real time.
- Auto update notifications.
- Much more...
- Windows 7 or newer operating system 64-bit
- For CPU mining a modern CPU with SSE2 support
- For AMD mining any AMD GPU with OpenCL support
- For NVIDIA mining any NVIDIA GPU with Compute capability (SM) 2.1 or newer
- up-to-date drivers for all GPUs
- Reliable internet connectivity
- Personal Bitcoin wallet: https://www.nicehash.com/index.jsp?p=faq#faqs15
All you have to do is download, extract and run the miner (no installation needed), choose the server location that is the closest to your location, run built-in benchmark and enter your Bitcoin wallet address where you want to get your coins sent at - and you are ready to start mining and maximizing your profit.
Note: .NET Framework 2.0 or higher and Microsoft Visual C++ Redistributable 2013 is required. No additional installations should be needed if you use Windows 7 or later. However, if you encounter any issues when starting application (application would fail to start or errors/warnings about missing DLL files are displayed) you should download and install Microsoft .NET Framework 2.0 and Microsoft Visual C++ Redistributable 2013 (vcredist_x64.exe) (after installation a reboot might be required).
Detailed instructions:
- Download binaries from here: https://github.com/nicehash/NiceHashMinerLegacy/releases
- Extract zip archive
- Run NiceHashMinerLegacy.exe
- After first run, start benchmark test, otherwise Multi-Algorithm mining will not work properly; for AMD GPUs we suggest you to run Precise benchmark
- Make sure you select your own personal Bitcoin wallet to receive payments, see Bitcoin wallet guidelines and instructions here: https://www.nicehash.com/index.jsp?p=faq#faqs15.
- You will receive Bitcoin payments according to our payments schedule: https://www.nicehash.com/index.jsp?p=faq#faqs6
WARNING: Due to specific requirements of the supporting back-end program "sgminer", you can not run NiceHash Miner Legacy through Windows RDP (Remote Desktop Protocol) if you are using AMD GPUs. If you still wish to use remote access to your computer while running NiceHash Miner Legacy we suggest you to use TeamViewer: https://www.teamviewer.com.
As a back-end NiceHash Miner Legacy relies on the NiceHash.com service. By running NiceHash Miner Legacy you're essentially selling the hashing power of your CPUs & GPUs to hashing power buyers. Those are using the hashing power to mine various cryptocurrency coins and support decentralized blockchain networks - similar to cloud computing - only that by running NiceHash Miner Legacy you're actually being a provider for the cryptocurrency mining hashing power. You are being part of a global compute power network, empowering decentralized digital currencies.
Profitability of mining can go up and down that may be unprofitable to mine especially places with high electricity cost. By using the "MinimumProfit" settings, NiceHashMinerLegacy will stop mining if the current profits are below the minimum amount (in USD). This will help you mine during "profitable" times only.
Click 'Settings' button. NiceHash Miner Legacy will be relaunched with the ability to modify configs. Alternatively, you can manually modify \configs\General.json for general settings and \configs\benchmark_XXX.json (XXX is your device UUID) files for device benchmark settings (close NiceHash Miner Legacy first).
Parameter | Range | Description |
---|---|---|
ConfigFileVersion | Version | This is to identify which version of NiceHashMinerLegacy did the config file is made from. |
Language | number | Language selection for NiceHashMinerLegacy GUI. |
DisplayCurrency | valid 3 letter code | Converts to selected currency via http:https://fixer.io valid options are any supported via fixer. |
DebugConsole | true or false | When set to true, it displays debug console. |
BitcoinAddress | valid BTC address | The address that NiceHashMinerLegacy will mine to. |
WorkerName | text | To identify the computer on NiceHash web UI. |
ServiceLocation | number | Used to select the location of the mining server. |
HideMiningWindows | true or false | When set to true, sgminer, ccminer and cpuminer console windows will be hidden. |
MinimizeToTray | true or false | When set to true, NiceHashMinerLegacy will minimize to the system tray. |
ForceCPUExtension | 0, 1, 2, 3 or 4 | Force certain CPU extension miner. 0 is automatic, 1 for AVX2, 2 for AVX, 3 for AES and 4 for SSE2. |
SwitchMinSecondsFixed | number | Fixed part of minimal time (in seconds) before miner switches algorithm. Total time is SwitchMinSecondsFixed + SwitchMinSecondsDynamic. |
SwitchMinSecondsDynamic | number | Random part of minimal time (in seconds) before miner switches algorithm. Total time is SwitchMinSecondsFixed + SwitchMinSecondsDynamic. Random part is used to prevent all world-wide NiceHash Miner Legacy users to have the exact same switching pattern. |
SwitchMinSecondsAMD | number | Fixed part of minimal time (in seconds) before miner switches algorithm (additional time for AMD GPUs). Total time is SwitchMinSecondsFixed + SwitchMinSecondsAMD + SwitchMinSecondsDynamic. |
MinerAPIQueryInterval | number | Amount of time between each API call to get the latest stats from miner. |
MinerRestartDelayMS | number | Amount of time to delay before trying to restart the miner. |
BenchmarkTimeLimits\CPU | numbers | List of benchmarking time (in seconds). The first one is for "Quick benchmark", second one is for "Standard benchmark" and third one is for "Precise benchmark". |
BenchmarkTimeLimits\NVIDIA | numbers | List of benchmarking time (in seconds). The first one is for "Quick benchmark", second one is for "Standard benchmark" and third one is for "Precise benchmark". |
BenchmarkTimeLimits\AMD | numbers | List of benchmarking time (in seconds). The first one is for "Quick benchmark", second one is for "Standard benchmark" and third one is for "Precise benchmark". |
DeviceDetection\DisableDetectionNVidia6X | true or false | Set it to true if you would like to skip the detection of NVidia6.X GPUs. |
DeviceDetection\DisableDetectionNVidia5X | true or false | Set it to true if you would like to skip the detection of NVidia5.X GPUs. |
DeviceDetection\DisableDetectionNVidia3X | true or false | Set it to true if you would like to skip the detection of NVidia3.X GPUs. |
DeviceDetection\DisableDetectionNVidia2X | true or false | Set it to true if you would like to skip the detection of NVidia2.X GPUs. |
DeviceDetection\DisableDetectionAMD | true or false | Set it to true if you would like to skip the detection of AMD GPUs. |
AutoScaleBTCValues | true or false | Set it to true if you wish to see the BTC values autoscale to the appropriate scale. |
StartMiningWhenIdle | true or false | Automatically start mining when computer is idle and stop mining when computer is being used. |
MinIdleSeconds | number | When StartMiningWhenIdle is set to true, MinIdleSeconds tells how many seconds computer has to be idle before mining starts. |
LogToFile | true or false | Set it to true if you would like NiceHashMinerLegacy to log to a file. |
LogMaxFileSize | number | The maximum size (in bytes) of the log file before roll over. |
ShowDriverVersionWarning | true or false | Set to true if you would like to get a warning if less than ideal driver for mining is detected. |
DisableWindowsErrorReporting | true or false | Set it to true if you would like to disable windows error reporting. This will allow NiceHashMinerLegacy to restart the miner in the case of the miner crashes. |
UseNewSettingsPage | true or false | Set to true if you would like to use the new Settings form. |
NVIDIAP0State | true or false | When set to true, NiceHashMinerLegacy would change all supported NVidia GPUs to P0 state. This will increase some performance on certain algorithms. |
ethminerDefaultBlockHeight | number | A fallback number that will be used if API call fails. This is only used for benchmarking. |
EthminerDagGenerationType | 0, 1, 2, 3 | Set ethminer DAG mode generation 0 - SingleKeep, 1 - Single, 2 - Sequential, 3 - Parallel. |
ApiBindPortPoolStart | number | Set the starting value (default is 5100) for miners API ports. When a new miner is created it will use an avaliable API port starting from the ApiBindPortPoolStart and higher. |
MinimumProfit | number | If set to any value more than 0 (USD), NiceHashMinerLegacy will stop mining if the calculated profit falls below the set amount. |
LastDevicesSettup | device settup list | This list is used for setting if a device is enabled or disabled. |
LastDevicesSettup\Enabled | true or false | Set to false if you would like to disable this device for benchmarking and mining by NiceHashMinerLegacy. |
LastDevicesSettup\UUID | text | Used for unique identification purposes in the config file (DO NOT EDIT) |
LastDevicesSettup\Name | text | Used for identification purposes in the config file (DO NOT EDIT) |
Parameter | Range | Description |
---|---|---|
DeviceUUID | text | Used for unique identification purposes in the config file (DO NOT EDIT) |
DeviceName | text | Used for identification purposes in the config file (DO NOT EDIT) |
AlgorithmSettings | dictionary {key: text, value: Algorithm } | Key value paired dictionary with avaliable device algorithms settings. Keys should not be edited only Algorithm data. |
AlgorithmSettings\Algorithm\NiceHashID | number | Algorithm ID (DO NOT EDIT) |
AlgorithmSettings\Algorithm\MinerName | text | specific miner name setting (DO NOT EDIT) |
AlgorithmSettings\Algorithm\BenchmarkSpeed | number | Fine tune algorithm ratios by manually setting benchmark speeds for each algorithm. |
AlgorithmSettings\Algorithm\ExtraLaunchParameters | text | Additional launch parameters when launching miner and this algorithm. |
AlgorithmSettings\Algorithm\Intensity | number | Set algorithm Intensity setting for this algorithm (Setting works only for supported NVIDIA miners). |
AlgorithmSettings\Algorithm\LessThreads | 0 .. 64 | Reduce number of threads used on CPU by LessThreads (Setting works only on CPU miners). |
AlgorithmSettings\Algorithm\Skip | true or false | Set to true if you would like to skip & disable a particular algorithm. Benchmarking as well as actual mining will be disabled for this particular algorithm. That said, auto-switching will skip this algorithm when mining will be running. |
If your CPU has 8 virtual cores and you would like to mine only with 7:
Set LessThreads to 1.
My NVIDIA video card(s) is/are not detected.
Make sure to install latest official NVIDIA drivers from here: http:https://www.nvidia.com/Download/index.aspx Also check whether your card has Compute capability (version) 2.1, 3.x or 5.x, check here: https://en.wikipedia.org/wiki/CUDA#Supported_GPUs
My AMD video card(s) is/are not detected.
Make sure to install latest official AMD drivers from here: http:https://support.amd.com/en-us/download Also check whether your card supports OpenCL, check "OpenCL" column here: https://en.wikipedia.org/wiki/List_of_AMD_graphics_processing_units
I am having issues with my AMD GPU drivers.
We recommend you to use 15.7.1 version of AMD GPU display drivers. The latest Crimson drivers are also supported, but optimal speed for the majority of algorithms can be achieved by using 15.7.1 version. This version can be downloaded here. When uninstalling or reinstalling display drivers we suggest you to use Guru 3D Display Driver Uninstaller. This utility will make sure you get a clean driver state. You can download it here. If you are using Windows 10, the AMD installer utility is sometimes unable to install drivers, therefore you have to install them manually. Download and run diver installer, let it extract the archive and then cancel it when prompted to execute actual install. After this go to Control Panel / System / Device Manager, Right click on your GPU, choose to Update driver manually and point to c:\AMD[driver version] folder to finish the manual driver installation.
I'm getting "Always ask before opening this file" when running NiceHash Miner Legacy
Make sure you un-check the checkbox "Always ask before opening this file" when NiceHash Miner Legacy is starting cpuminer, ccminer or sgminer back-end programs. This is needed because back-end programs will be executed several times while NiceHash Miner Legacy is running (auto-switching according to profitability and in case programs hangs) and you have to make sure these programs will be to executed automatically without your intervention.
My anti-virus is blocking the application
Some anti-virus software might block NiceHash Miner Legacy as well as supporting back-end programs (cpuminer, ccminer, sgminer) due to false-positive matches. All software, included into NiceHash Miner Legacy has been verified and checked by our team and is absolutely virus/trojan free. Our service is well established and trusted among users, therefore you can fully trust software releases that are downloaded from our GitHub repository: https://github.com/nicehash/NiceHashMinerLegacy/releases. However, make sure you never download and run any files from other unknown sources! If you downloaded the software package from our GitHub repository you can simply resolve the issues with false-positives by adding the files sgminer.exe, ccminer_sp.exe, ccminer_tpruvot.exe, cpuminer_x64_AVX.exe, cpuminer_x64_AVX2.exe and cpuminer_x64_SSE2.exe to anti-virus exception list.
I'm getting "Enqueueing kernel" errors on AMD GPUs
If you have very low amount of system memory (RAM), especially if lower than 4 GB, than you might encounter this kind of errors:
Error -4: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)
GPU 0 failure, disabling!
This is because the sgminer mining application, which is used for AMD GPU mining, requires a particular amount of free system memory (RAM) to be able to run successfully. We suggest you to upgrade your system with more RAM.
My benchmarking results are not accurate
Any kind of automation can only be done up to a particular level. We've spent significant effort to make benchmarking as good as possible, but it can't be made ideal. First of all, make sure to run Precise benchmark if Standard benchmark is not giving you satisfactory results. If you still see a deviation of actual mining speed from the one, calculated from benchmark, then you should manually enter these observed speed numbers from actual mining into config.json file or set them via the "Settings" button.
Benchmarks on particular algorithms keep getting terminated on AMD GPUs
In some particular combinations of Windows version + AMD Driver version benchmarks on some algorithms keep getting terminated. If the particular algorithm that is being terminated is shown on pause on the front page of NiceHash.com (No orders - mining unavailable), then this is normal expected behaviour. However, if benchmark is also terminated for active algorithms, then you have to apply workaround solution. The solution is to copy all .cl files from the [..\bin\sgminer-5-3-0-general\kernel] folder into [c:\Users[your_username_here]\appdata\local\temp] folder and then re-run the benchmark for the algorithms that are terminated during benchmark.
To report bugs and issues please use the GitHub issue reporting tool: https://github.com/nicehash/NiceHashMinerLegacy/issues. Any bugs and issues reports are very much appreciated since it helps us to improve NiceHash Miner Legacy. Thank you.
- For CPU mining our joblo's forked cpuminer-opt has been used from here: https://github.com/nicehash/cpuminer-opt (compiled with MingW64).
- For NVIDIA 2.1, 3.x, 5.x and 6.x cryptonight mining our tsiv's forked ccminer-cryptonight has been used from here: https://github.com/nicehash/ccminer-cryptonight
- For NVIDIA 5.x and 6.x cards, sp's fork of ccminer has been used from here: https://github.com/sp-hash/ccminer.
- For NVIDIA 2.1 and 3.x (older cards), tpruvot's fork of ccminer has been used from here: https://github.com/tpruvot/ccminer.
- Special Decred ccminer forked from tpruvot's ccminer has been used from here: https://github.com/nicehash/ccminer-tpruvot.
- Optimized Lyra2REv2 ccminer developed by Nanashi Meiyo-Meijin: https://github.com/nicehash/ccminer-nanashi.
- For AMD cards, sgminer has been used from here: https://github.com/nicehash/sgminer.
- For Ethereum miner, Genoil's fork of ethminer has been used from here: https://github.com/nicehash/cpp-ethereum.
- Optimized SIA ccminer developed by KlausT: https://github.com/KlausT/ccminer.