感谢tubaxiaosiji大佬的脚本
更新至2021-04-29官方驱动r8152.53.56-2.15.0.tar.bz2 https://www.realtek.com/zh/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-usb-3-0-software
为Proxmox VE 5/6 快速添加RTL 8152 2.5G网卡驱动,少走点弯路。。。一块由95 RMB PDD USB3 2.5G 网卡引发的血案。。。
基于debian的发行版本可以尝试运行一下,因为不同发行版本的软件源仓库可能不太一样,不一定有匹配的内核image和内核Headers,这个得靠各位去尝试了。 如果你的系统是PVE系统的话,直接无脑下一步就行了。
注意[Notice]:
Get superuser permission 【最好请使用root用户编译】
Add no subcript source 【添加非订阅用户源】
NOT recommended for production use 【不建议生产环境中使用】
PVE pve-no-subscription repository provided by proxmox.com 【非订阅用户软件仓库由proxmox.com提供】
Support Proxmox VE 5.0-6.0 (include 6.2.x) 【支持PVE 5.0-6.0 系统,包括6.2.x 】
r8152.53.56-2.15.0.tar.bz2 provided by Realtek.com 【r8152.53.56-2.15.0.tar.bz2由Realtek官网提供】
Support Linux kernel version 2.4 to 5.6 【支持的Linux内核版本,从2.4到5.6】
root@hostname# 这个是命令提示符, "#" 井号后面的才是SHELL命令
1.食用方法如下 [Usage] :
2.安装git和它的依赖组件 [Install git and dependent packages]
root@hostname# apt-get update
root@hostname# apt-get -y install git
3.克隆我的仓库 [Clone my .git]
root@hostname# git clone https://github.com/dreamteki/RTL8152-Driver-for-Proxmox-VE5-6-and-debian.git
4.切换到目录 [Change dir]
root@hostname# cd ./RTL8152-Driver-for-Proxmox-VE5-6-and-debian
5.赋予运行权限 [Chmod]
root@hostname# chmod a+x rtl8152_install.sh
6.运行脚本 [Run script in shell]
root@hostname# bash rtl8152_install.sh
7.等待一会 [Wait for a minutes]...
8.检查模块是否已安装加载 [Check kernel module is exist it]
root@hostname# lsmod | grep 'r8152'
出现 r8152字样即安装成功 [If show 'r8152' that is OK!]
9.如果出现 modprobe: ERROR: could not insert r8152: Invalid argument,请重启系统再运行一遍脚本即可。
[If show modprobe: ERROR: could not insert r8152: Invalid argument appears, please restart the system and run the script again.]