Home-assistant sensor platform for Xiaomi Mijia BT Hygrothermo temperature and humidity sensor.
To use, add the following to your configuration.yaml file:
sensor:
- platform: xiaomi_hygrothermo
name: mijia ht #1
mac: 'xx:xx:xx:xx:xx:xx'
scan_interval: 60
- mac is required.
- default "scan" interval is every 30 seconds.
using hcitool:
$ sudo hcitool lescan
LE Scan ...
LE Scan ...
4C:65:A8:xx:xx:xx (unknown)
4C:65:A8:xx:xx:xx MJ_HT_V1
[...]
using bluetoothctl:
$ sudo bluetoothctl
[NEW] Controller xx:xx:xx:xx:xx:xx homeqube [default]
[bluetooth]# scan on
Discovery started
[CHG] Controller xx:xx:xx:xx:xx:xx Discovering: yes
[NEW] Device 4C:65:A8:xx:xx:xx MJ_HT_V1
[bluetooth]#
[bluetooth]# quit
look for MJ_HT_V1 devices...
