• Test Environment for Security Function Chaining

• This platform works without any SDN controllers.
• If you find any bugs or have some questions, please send an e-mail to me.

• The configuration of the platform: config/global.conf
• The configuration of VNFs: config/vnf.conf

• The current platform is fully tested on Ubuntu 16.04.
• It may work on other Linux platforms if its dependency issues are solved.

1. Set up a KVM environment
   $ cd setup
   $ ./sfc-install.sh
   $ sudo reboot

2. Configure the KVM environment
   $ cd setup
   $ vi ovs-setup.sh (update interfaces for inbound/outbound traffic)
   $ ./ovs-setup.sh
   $ ./def-setup.sh (if you want to modify the default KVM network)
   $ ./download-ubuntu.sh (if you need the Ubuntu 16.04 image)
   $ sudo reboot

3. Configure the interfaces for inbound/outbound traffic
   $ vi config/global.conf

4. Configure VNFs
   $ vi config/vnf.conf (modify contents for your environment)

• Make a service chain
  $ ./sfc.py [VNF1,VNF2,VNF3,...]

• Clean up the already-deployed service chain
  $ ./sfc.py clean

• CAUSION!
  Please make sure that you have modified configuration files in the 'config' directory for your environment!

1. Create default VMs in manual
   $ virt-manager

• VNFs
  firewall, netsniff-ng, snort-ids, suricata-ids, suricata-ips, tcpdump, NAT
  Make sure that the NAMEs of new VMs are the same with the above ones (case-sensitive)

• VM installation for each VNF
  Use Ubuntu 16.04 (~/images/ubuntu-16.04.2-server-amd64.iso)
  Select 'NAT' network for the first (default) interface
  Check 'customize configuration before installation' and add two more interfaces (network source: ovsbr0)
  During Ubuntu installation, set the static IP address for the first interface (DO NOT USE DHCP)
  Use the following ID and password (ID: ubuntu, PW: ubuntu)
  Check 'OpenSSH server' when selecting software to install

• VNF IP addresses defined in the default configuration file
  firewall: 192.168.122.11
  netsniff-ng: 192.168.122.12
  snort-ids: 192.168.122.13
  suricata-ids: 192.168.122.14
  suricata-ips: 192.168.122.15
  tcpdump: 192.168.122.16
  NAT: 192.168.122.17

2. Push SSH keys to each VM in order to log it in without password
   $ util/push-key.sh [user ID]@[VM IP address]
   (e.g., util/push-key.sh [email protected])

3. Install VNF applications (run the following commands in each VM)
   VM $ git clone https://github.com/sdx4u/sfc
   VM $ cd sfc/apps
   VM $ ./update.sh
   VM $ ./default-setup.sh
   VM $ sudo reboot
   VM $ ln -s sfc/apps/[VM name]
   VM $ cd [VM name]
   VM $ ./setup.sh
   Then, follow the instructions in the README file

4. Make service chains as follows
   $ ./sfc.py snort-ids,NAT
   $ ./sfc.py firewall,suricata-ips,NAT
   $ ./sfc.py suricata-ids,netsniff-ng

1. Create a general VM
   $ virt-manager

• VM installation of the general VM
  Use Ubuntu 16.04 (~/images/ubuntu-16.04.2-server-amd64.iso)
  Select 'NAT' network for the first (default) interface
  Check 'customize configuration before installation' and add two more interfaces (network source: ovsbr0)
  During Ubuntu installation, set the static IP address for the first interface (192.168.122.10)
  Use the following ID and password (ID: ubuntu, PW: ubuntu)
  Check 'OpenSSH server' when selecting software to install

2. Set default configurations
   $ ssh [email protected]
   VM $ git clone https://github.com/sdx4u/sfc
   VM $ cd sfc/apps
   VM $ ./update.sh
   VM $ ./default-setup.sh
   VM $ sudo reboot

VM $ sudo vi /etc/sudoers

Add the following line at the end of the file  
ubuntu	ALL=NOPASSWD:ALL  

VM $ sudo vi /etc/sysctl.conf

Uncomment the following line  
net.ipv4.ip_forward=1  

VM $ sudo vi /etc/network/interfaces

Add the following lines at the end of the file  
auto eth1  
iface eth1 inet manual  
auto eth2  
iface eth2 inet manual  

3. Install VNF applications
   $ ssh [email protected]
   VM $ ln -s sfc/apps/firewall
   VM $ cd firewall
   VM $ ./setup.sh
   VM $ cd ..
   VM $ ln -s sfc/apps/netsniff-ng
   VM $ cd netsniff-ng
   VM $ ./setup.sh
   VM $ cd ..
   VM $ ln -s sfc/apps/snort-ids
   VM $ cd snort-ids
   VM $ ./setup.sh
   VM $ cd ..
   VM $ ln -s sfc/apps/suricata-ids
   VM $ cd suricata-ids
   VM $ ./setup.sh
   VM $ cd ..
   VM $ ln -s sfc/apps/suricata-ips
   VM $ cd suricata-ips
   VM $ sudo cp config/suricata-ips.yaml /usr/local/etc/suricata/suricata-ips.yaml
   VM $ cd ..
   VM $ ln -s sfc/apps/tcpdump
   VM $ cd tcpdump
   VM $ ./setup.sh
   VM $ cd ..
   VM $ ln -s sfc/apps/NAT
   VM $ cd NAT
   VM $ ./setup.sh

4. Clone the general VM for each VNF
   firewall, netsniff-ng, snort-ids, suricata-ids, suricata-ips, tcpdump, NAT
   Make sure that the NAMEs of new VMs are the same with the above ones (case-sensitive)

5. Reconfigure cloned VMs for each VNF repeatedly
   $ ssh [email protected]
   VM $ cd sfc/apps
   VM $ ./network-setup.sh [VNF] [VM IP address]
   (e.g., ./network-setup.sh firewall 192.168.122.11)
   VM $ sudo reboot

6. Push SSH keys to each VM in order to log it in without password
   $ util/push-key.sh [user ID]@[VM IP address]
   (e.g., util/push-key.sh [email protected])

7. Make service chains as follows
   $ ./sfc.py snort-ids,NAT
   $ ./sfc.py firewall,suricata-ips,NAT
   $ ./sfc.py suricata-ids,netsniff-ng

• Jaehyun Nam [email protected]