ZMap is an open-source network scanner that enables researchers to easily perform Internet-wide network studies. python-libzmap is a zmap-python binding, with full scan option support(tcp_synscan, icmp_echoscan, icmp_echo_time, udp, ntp, upnp)
Make sure you have zmap
installed: https://github.com/zmap/zmap
git clone [email protected]:d00t-b-res/libzmap-python3.git
cd libzmap-python3 && python3 setup.py install
or
sudo pip3.6 install git+https://github.com/d00t-b-res/libzmap-python3
>>> from libzmap import ZmapProcess
>>>
>>> proc = ZmapProcess(targets='101.200.188.97/20', options='-B 100M', probe_module='icmp_echoscan')
>>> for obj in proc.run():
... print(obj)
...
{'daddr': '172.30.8.34', 'code': '0', 'timestamp_ts': '1524630534', 'classification': 'echoreply', 'seq': '0', 'timestamp_us': '196136\n', 'saddr': '101.200.178.99', 'success': '1', 'icmp_id': '50011', 'saddr_raw': '1672661093', 'repeat': '0', 'ttl': '52', 'ipid': '20469', 'daddr_raw': '570957484', 'type': '0', 'cooldown': '1', 'timestamp_str': '2018-04-25T12:28:54.196+0800'}
{'daddr': '172.30.8.34', 'code': '0', 'timestamp_ts': '1524630534', 'classification': 'echoreply', 'seq': '0', 'timestamp_us': '196183\n', 'saddr': '101.200.176.161', 'success': '1', 'icmp_id': '25116', 'saddr_raw': '2712717413', 'repeat': '0', 'ttl': '52', 'ipid': '38111', 'daddr_raw': '570957484', 'type': '0', 'cooldown': '1', 'timestamp_str': '2018-04-25T12:28:54.196+0800'}
{'daddr': '172.30.8.34', 'code': '0', 'timestamp_ts': '1524630534', 'classification': 'echoreply', 'seq': '0', 'timestamp_us': '196199\n', 'saddr': '101.200.188.190', 'success': '1', 'icmp_id': '9652', 'saddr_raw': '3200043109', 'repeat': '0', 'ttl': '52', 'ipid': '45756', 'daddr_raw': '570957484', 'type': '0', 'cooldown': '1', 'timestamp_str': '2018-04-25T12:28:54.196+0800'}
{'daddr': '172.30.8.34', 'code': '0', 'timestamp_ts': '1524630534', 'classification': 'echoreply', 'seq': '0', 'timestamp_us': '196216\n', 'saddr': '101.200.177.21', 'success': '1', 'icmp_id': '59041', 'saddr_raw': '363972709', 'repeat': '0', 'ttl': '52', 'ipid': '63177', 'daddr_raw': '570957484', 'type': '0', 'cooldown': '1', 'timestamp_str': '2018-04-25T12:28:54.196+0800'}
...
- targets: ip address wildcard. (eg:
101.200.188.97/20
) - port: target port. (eg:
80
) - probe_module: zmap probe_module supported. (
tcp_synscan
,icmp_echoscan
,icmp_echo_time
,udp
,upnp
) - options: zmap scan params. (eg:
-B 100M
) - fqp: path to zmap binary. (eg:
zmap
) - yield_raw: if
True
, will yield raw zmap output(typestr
) instead of packed object. For debug purpose.
The libzmap code is tested against the following python interpreters:
- Python 3.6 (Test on ubuntu-18.04 with zmap-2.1.1);
[email protected], Welcome to pull requests!