Syth999 is a cryptic watch face that is based around the Absintheric Font. With selectable layout styles and colors, it's easy to make this watch face your daily driver. Don't worry, it gets easier to read the time once you realize where to look ;)

• 24/12 Hour Time - Press the top left button to toggle
• Color Inversion - Press the top right button to toggle a light or dark color scheme
• Layout Style - Press the bottom right button to switch between a clean time-only layout, or a balanced layout with complications
• NTP Time Sync - Time drifting is no longer an issue with 2 daily NTP time syncs, and an initial NTP sync on install
• Live Weather - Updates every 30 minutes by default
• Weather by City Name or City Code - If your city name is not unique, you can fallback to your city code as described in the source comments.
• Ambient Temperature - No WiFi? Watchy will use it's RTC's ability to give you the current ambient temperature (typically on the warmer side)
• Pause Updates - Conserve battery life by pausing weather updates when you're sleeping (user definiable start & end times)
• Battery Meter - Perfectly balanced, the battery meter is nested between the time and weather
• WiFi Scanning - Configure your most used WiFi access points to maintain connectivity, Home, Work, School, etc.

Admittedly, there's quite a bit to configure with this (and future) watch face(s). These required configurations have comment descriptions in the source code. Below are the most critical settings that need to be configured in order to run this watch face:

In order for the watchy to receive weather upates, you'll need an API Key from OpenWeatherMap.org which is completely free. I've included SQFMI's key which is enabled by default. Using this key is not recommended as it will cease to function when minute/daily limits are reached, or if SQFMI simply deletes it. Add your API Key to the APIKEY definition.

Weather for your location is limited to one area and is defined by entering your city name where defined in the source code under CITY. If your city name is used in other states or provinces, you can also use your city code by looking up a city on openweathermap.org, it'll take you to a page like "https://openweathermap.org/city/4574324". Copy those numbers (ex 4574324) on the end and put them into CITY_ID between the quotes. You'll also have to define COUNTRY and TEMP. TEMP is used to determine if Imperial temperature is displayed.

It's possible to pause weather updates when the watch is not in use, i.e. when you're sleeping. By default, its set to pause 30 minutes after midnight, and resume updates at 5:30am. These can be changed by modifying the pauseStart and pauseEnd strings. Setting both strings to the same time will disable the pause updates feature. Pause start and end times must be written in the 24 hour format.

When updates are paused, the weather icon will be represented by a sleeping RTC icon and ambient temperature will be used instead of live weather.

NTP syncs require that you define your timezone, TIMEZONE_STRING which can be found using this resource link. Use the example in the source to determine what is required.

By default, the NTP server tried first is a pool of servers that should automatically find the best match based on your location. You can leave NTP_SERVER_1 as-is, or specify NTP servers. NTP_SERVER_2 and NTP_SERVER_3 are US based and should be changed to a local server if outside of the US.

NTP Syncs happen twice a day, once at Noon and once at Midnight. This can be changed by modifying NTP_TIMER.