Provides an easy way to setup multihop OpenVPN Connections.
This utility will allow you to create a list of OpenVPN Tunnels and start them cascaded.
e.g The the second tunnel will be established trough the first tunnel and so on.
Please see this Repo for more details in Setup and preperations.
You will need a FreeBSD build environment.
git clone [email protected]:pfsense/FreeBSD-ports.git pfSense-ports
cd pfSense-ports/security
git clone https://github.com/ddowse/pfSense-pkg-openvpn-multihop
cd pfSense-pkg-openvpn-multihop
make package
Please check the pfSense package development documentation for more information.
pkg add https://github.com/ddowse/pfSense-pkg-openvpn-multihop/releases/download/v1.0/pfSense-pkg-openvpn-multihop-1.0.txz
-
Create Backup of your configuration!
-
Make sure that your OpenVPN Clients connected succesfully to your provider
-
Assign the Network Ports to an Interfacae under Interfaces > Interface Assignments
-
Make sure that NAT is set properly to Manual Outbound NAT
-
Make sure that NAT on each VPN Interface is set
e.g:
nat on ovpnc1 inet all -> (ovpnc1) port 1024:65535 round-robin
- Set Interface to any in OpenVPN Client Configuration.
- If 'keepalive' is checked a background process is started once all tunnels are up. It will check the status of all tunnels one by one every 3 seconds. If any tunnel of the configured tunnels is down, all tunnels brought down and the cascade will be restarted.
- Navigate to VPN > OpenVPN > Client Multihop
- Click the add button
- Choose 2 OpenVPN Clients from the dropdown menue
- Click save
- Click apply to save and start
- Wait aprox. 30 seconds for page to refresh and checkmarks turned green
- Click the add Button
- Choose OpenVPN Client
- Save and click apply
- Wait aprox. 30 seconds for page to refresh and checkmarks turned green
- Will start the tunnels one by one.
- Will start background process if keepalive was checked on creation.
- Click stop this will also kill the keepalive process
- Will remove all configuration, can't be undone.
- Click Stop
- Click Start
Check routing like this
netstat -4nr
Check tunnel(s) for passing openvpn traffic Interface and Port may vary
tcpdump -nv -i ovpnc1 port 1149
Check your IP.
curl ifconfig.co
Don't forget to check your logs(!)
- Creating a 2 Tunnel cascade works by adding to the custom-options field of the first tunnel a route-up command and remove any route exec settings e.g do not set default routing.
route-up "/usr/local/etc/openvpn-multihop/addroute.sh 95.211.95.232"The IP is the OpenVPN Server of the next tunnel.
The script (addroute.sh)
/sbin/route add -host ${1} $route_vpn_gateway 255.255.255.255
This will add to the routing table:
95.211.95.232/32 10.3.3.2 UGS ovpnc1
Connecting now to the IP 95.211.95.232 will go trough the first tunnel.
When the tunnel configuration is extended. The steps as before are repeated and route-up and route-exec are changed to the new exit.
- Please report any issues via github
- Thorough testing was done with Perfect Privacy VPN only
"John" had the idea for this package and provided the initial financial support to make it possible. Thanks.
