Note: most of the information in this repo refers to the "frozen" FCS environments of data.gov. If you are looking for documentation for cloud.gov environments, see the application repositories.

This is the main repository for the Data.gov Platform. We use this repository to track our team's work and for our Ansible playbooks that deploy the Data.gov site components to FCS:

• www.data.gov (WordPress)
• catalog.data.gov (CKAN 2.8)
• inventory.data.gov (CKAN 2.8)
• labs.data.gov/dashboard (Project Open Data Dashboard)

Additionally, each host is configured with common Services:

• Baseline OS Hardening
• GSA IT Security Agents
• TLS host certificates
• Postfix email server
• Filebeat (Logging)
• New Relic (Infrastructure Monitoring)
• Trendmicro (OSSEC-HIDS)
• and more...

See our Roadmap for where we're taking Data.gov.

Production and staging environments are deployed to FAS Cloud Services (FCS, formerly BSP). Our sandbox environments are provisioned by GSA/datagov-infrastructure-live.

GSA VPN access is required to access production and staging.

FCS environments are considered "frozen" and only accepting security updates and critical bug fixes. Applications are frozen on the fcs branch.

All deployments are done from the Jumpbox. They are already configured with these requirements:

• pyenv (recommended) or Python 3.6
• Pipenv
• Ansible Vault

Once you're SSH'd into the jumpbox, follow these steps for deploy.

1. Assume the ubuntu user and start a tmux session to prevent disconnects.

   $ sudo su -l ubuntu
   $ tmux attach
   

   Or if there are no existing tmux sessions, start a new one.

   $ tmux
   

2. Switch to the datagov-deploy directory.

   $ cd datagov-deploy
   

3. Check you are on the correct branch and up-to-date. The branch depends on the environment you're working with. When doing a release, you should be on release/YYYYMMDD

   $ git status
   $ git pull --ff-only
   

4. Update python dependencies.

   $ pipenv sync
   

5. Update Ansible role dependencies.

   $ pipenv run make vendor
   

6. Run the playbook from the ansible directory.

   $ cd ansible
   $ pipenv run ansible-playbook site.yml
   

These commands assume you've activated the virtualenv with pipenv shell or you can prefix each command with pipenv run e.g. pipenv run ansible.

Deploy the entire Platform, including Applications, into a consistent state.

$ ansible-playbook site.yml

If the playbooks failed to apply to a few hosts, you can address the failures and then retry with the --limit parameter and the retry file.

$ ansible-playbook site.yml --limit @site.retry

Or use --limit if you just want to focus on a single host or group.

$ ansible-playbook site.yml --limit catalog-web

Deploy the static catalog application.

$ ansible-playbook catalog.yml

Reboot any hosts, one by one, that require one e.g. after an apt-get dist-upgrade.

$ ansible-playbook actions/reboot.yml

Force a reboot even if no reboot is required. Use this if you just need to reboot hosts for any reason.

$ ansible-playbook actions/reboot.yml -e '{"force_reboot": true}' --limit ${host}

Note: for Ansible to parse boolean values in --extra-vars we use the JSON syntax in the above example.

Install the common Services.

$ ansible-playbook common.yml

Upgrade OS packages as a one-off command on all hosts. Note: If you find you're doing one-off ansible commands often, then you should consider creating a situational playbook.

$ ansible -m apt -a 'update_cache=yes upgrade=dist' all

Reload the apache2 service for catalog.

$ ansible -m service -a 'name=apache2 state=reload' catalog-web-v1

Run a one-off shell command. Just an example, don't ever run this ;)

$ ansible -m shell -a "/usr/bin/killall dhclient && dhclient -1 -v -pf /run/dhclient.eth0.pid -lf /var/lib/dhcp/dhclient.eth0.leases eth0" all

Tail the logs using dsh.

$ dsh -g catalog-web-v1 -M -c tail -f /var/log/ckan/ckan.custom.log

Run a DB-SOLR sync for a dataset on catalog.

$ ansible-playbook actions/catalog-db-solr-sync.yml --extra-vars "db_solr_sync_package_name=insert-package-name-here"

These tags are supported by the site.yml platform-wide playbook.

Application playbooks deploy a single Application and its Services (e.g. apache2). We document supported tags and common variables here, but you should refer to the individual roles for the complete documentation. Note: deploying from the master branch will deploy a frozen version of each application via its fcs branch.

These commands assume you've activated the virtualenv with pipenv shell or you can prefix each command with pipenv run e.g. pipenv run ansible.

Provisions the Catalog app (catalog.data.gov).

$ ansible-playbook catalog.yml

Provision only catalog-web.

$ ansible-playbook catalog-web.yml

Provision only catalog-workers (harvesters).

$ ansible-playbook catalog-worker.yml

Deploy the Project Open Data Dashboard.

$ ansible-playbook dashboard-web.yml

Deploy inventory.data.gov.

$ ansible-playbook inventory.yml

Deploy Solr.

$ ansible-playbook solr.yml

Deploys the www.data.gov (WordPress) application.

$ ansible-playbook datagov-web.yml

Note: On the master branch, this variable should be set to fcs.

We use several cross-cutting groups that allow us to deploy to different hosts and set inventory variables based on different dimensions of our hosts.

These groups represent different major configurations of the base image.

• v1 Ubuntu Trusty 14.04
• v2 Ubuntu Bionic 18.04

Additionally, the application groups have a -v1 suffix e.g. catalog-web-v1. This helps us transition between stacks incrementally.

These groups represent different processes of applications, e.g. web and worker processes which might be slightly different configurations of the same application.

• catalog-admin web hosts for the catalog admin app (subset of catalog-web). This is CKAN with database write permissions.
• catalog-web web hosts for the catalog app. CKAN is configured read-only.
• catalog-harvester worker hosts for the catalog app.
• dashboard-web web hosts for the Dashboard app.
• inventory-web web hosts for the inventory app.
• wordpress-web web hosts for the datagov/wordpress app.

• jumpbox host where Ansible playbooks are executed from.
• solr Solr hosts.
• elasticsearch Elasticsearch hosts in mgmt vpc only.
• kibana Kibana hosts in mgmt vpc only.
• efk_nginx EFK Nginx hosts in mgmt vpc only.

• web meta group containing any hosts with a web server (e.g. apache2 or nginx).

Most development happens in the role repositories using molecule. There are still a few roles here that you can develop on individually.

• GNU Make
• Docker Engine
• pyenv (recommended) or Python 3.6
• Pipenv
• Vagrant
• Ansible Vault key for editing secrets in inventory

We use pipenv to manage the Python virtualenv and dependencies. Install the dependencies with make.

$ make setup

Install third-party Ansible roles.

$ pipenv run make vendor

Any commands mentioned within this README should be run within the virtualenv. You can activate the virtual with pipenv shell or you can run one-off commands with pipenv run <command>.

Run the molecule test suites locally. You probably don't want to do this since it takes a long time and let CI do it instead. See below for more on how to work with individual test suites. Molecule tests rely on docker for running tests in containerized hosts.

$ pipenv run make test

You can set the concurrency parameter with make's -j parameter.

$ pipenv run make -j4 test

Lint your work.

$ make lint

Molecule is the preferred test suite for testing roles. Playbooks can be tested by including them in the molecule playbook.

Molecule is modular, so you must cd to the directory of the role you are testing.

$ cd roles/software/ckan/native-login
$ molecule test

During development, you'll want to run only the converge playbook to avoid creating/destroying the container every time.

$ molecule converge

If you have multiple scenarios, you can specify them individually.

$ molecule test -s <scenario>

If you created a new scenario, be sure to add it to the appropriate variable in the Makefile

This is a work in progress. The Vagrant setup does not include the mysql or postgres databases. The local Ansible inventory is also incomplete.

Where possible, you should use Docker and Molecule for developing and testing your roles. There are some scenarios that you might want to manually test in a virtual machine with Vagrant. For example, some tasks are captured in a playbook instead of a role and playbooks are not tested with Molecule.

Initialize the vagrant environment.

$ vagrant up

Test that you can connect to the vagrant instance with Ansible.

$ ansible -i inventories/local -m ping all

Connect to the VM for debugging.

$ vagrant ssh

Run the wordpress playbooks locally.

$ ansible-playbook -i inventories/local common.yml datagov-web.yml

The local VM is considered to be in all Ansible groups, so running the site.yml playbook will apply every app and role to the VM, likely failing in unexpected ways. For this reason, you should avoid running the site.yml playbook and instead run common.yml with the application playbook.

Clean up the VM after your test.

$ vagrant destroy

Inventory secrets are stored encrypted within the git repository using Ansible Vault. In order to decrypt them for editing or review, you'll need the Ansible Vault password.

On invocations, you'll be prompted for the vault password. You should add the password to a file and configure Ansible so that it reads the password from file. In order to use git log to review vault history, you'll probably want previous passwords as well. First, create a directory for the passwords.

$ mkdir -m 0700 .secrets

Create a file (e.g. .secrets/ansible-secret-v2.txt) containing only a single Ansible Vault password. You can add additional passwords if you wish, one password per file. Then, set ANSIBLE_VAULT_IDENTITY_LIST to the list of password file paths (comma separated).

$ echo ANSIBLE_VAULT_IDENTITY_LIST=$(find $(pwd)/.secrets -type f | sort -r | paste -s -d, -) > .env

Your .env should look like:

ANSIBLE_VAULT_IDENTITY_LIST="/home/gsa/projects/datagov/datagov-deploy/.secrets/ansible-secret-v2.txt,/home/gsa/projects/datagov/datagov-deploy/.secrets/ansible-secret-v1.txt"

pipenv will load this .env file automatically if included at the root of the project.

On jumpbox hosts, the vault password file should be installed to /etc/datagov/ansible-secret.txt (group readable by operators). This is a manual step for initial jumpbox provisioning. Ubuntu may need to be added to the operators group.

If you have the Ansible Vault password (ask a team member), you can review and edit secrets with ansible-vault.

Review secrets in a vault.

$ ansible-vault view [path-to-vault.yml]

Edit secrets in a vault.

$ ansible-vault edit [path-to-vault.yml]

You can configure git to automatically decrypt Vault files for reviewing diffs.

$ git config --global diff.ansible-vault.textconv "ansible-vault view"

Because of GSA firewalls, we split our continuous integration and delivery into two roles. CircleCI handles continuous integration and Jenkins handles deployment within the GSA firewall.

On any commit, CircleCI runs the automated test suites and if successful, hands off deployment to Jenkins.

Using the configuration-as-code plugin, we are able to define the Jenkins configuration and its job configuration in code. After running the jenkins.yml playbook, there are a few manual steps that need to be done.

1. Log into the new instance
2. Configure credentials
3. Add an API token for the admin user and update jenkins_admin_password with this token.
4. (sandbox only) Add a CI bot user and API token

Add credentials to manage secrets.

Note: evaluate if we want to move the credential creation to configuration-as-code configuraiton.

With SAML authentication enabled, you can no longer create user/service accounts through the UI. Instead, use the script console to run the script below. Set a random password. The return value is the API token. Save this for later as you won't have another chance.

The CI user should be assigned to the build-manager role. This is already configured in our configuration-as-code.

// fill these out script parameters
def userName = 'ci'
def userPassword = // pwgen -s 64 1
def tokenName = 'circleci'

import hudson.model.*
import hudson.security.*
import jenkins.model.*
import jenkins.security.*
import jenkins.security.apitoken.*

// create the user
def instance = Jenkins.getInstance()
def hudsonRealm = new HudsonPrivateSecurityRealm(false)
hudsonRealm.createAccount(userName, userPassword)
instance.setSecurityRealm(hudsonRealm)
instance.save()

// create an API token for the user
def user = User.get(userName, false)
def apiTokenProperty = user.getProperty(ApiTokenProperty.class)
def result = apiTokenProperty.tokenStore.generateNewToken(tokenName)
user.save()

return result.plainValue

Add the following environment variables to CI configuration. These are required for the bin/jenkins_build script. Secret variables should be entered in the UI configuration only.

In the CI job configuration (.circleci/config.yml), run the bin/jenkins_build <job-name> script.

The CIS hardening benchmark sets a 027 umask, which means by default files are not world-readble. This is often a source of problems, where a service cannot read a configuration file.