English | 简体中文
This project makes ASR650x (ASR6501, ASR6502) series fully Arduino-Compatible. For Heltec CubeCell series.
Based on the ASR650x series of chips, we have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN-Node protocol stably, and can easily connect lithium batteries and solar panels… This is the CubeCell series.
Cube — Means modular design and easy assembly;
Cell — Is the product positioning, as a unit of the IoT series, working like a cell.
CubeCell series LoRaWAN-Node stack is migration form LoRaMac-node V4.4.0, based on "LoRaWAN specification 1.0.2" and "LoRaWAN Regional Parameters v1.0.2rB".
For more details, please refer to CubeCell Documents Page.
We have made an e-ink adaptation for cubecell, currently only supports 2.9 inch ink screen, we will update it later:https://github.com/HelTecAutomation/e-ink/blob/master/examples/DEPG0290BxS75AFxX_BW/DEPG0290BxS75AFxX_BW.ino
The currently supported ASR650x chip product models are:
MCU | Relative boards |
---|---|
ASR6501 | CubeCell-Board, CubeCell-Module, CubeCell-Capsule |
ASR6502 | CubeCell-Board Plus, CubeCell GPS-6502, CubeCell 1/2AA Node, CubeCell-Module Plus, CubeCell-Capsule Solar Sensor |
Make sure you have the latest Arduino IDE installed on your computer. If not installed, please refer to this documents:
-
Via Arduino IDE Boards Manager (Recommend)
-
Use Git with the development repository
Linux may have serial port can't link problem, please refer to this page:https://playground.arduino.cc/Linux/All/#Permission
Before reporting an issue, make sure you've searched for similar one that was already created. Also make sure to go through all the issues labelled as for reference.
Also you can talk in our forum: https://community.heltec.cn/
- Website:https://heltec.org
- Document Page: https://docs.heltec.cn
- Forum: https://community.heltec.cn/
- Twitter: https://twitter.com/HeltecOrg
- Face Book: https://www.facebook.com/heltec