It includes code from tapuino, but not all functionality is mapped to the UI. The idea behind this project was to test a single architecture for accessing different C64 mods, as opposed to different, unrelated boards.

Obviously, the arduino hardware is not powerful enough to actually support much more, so the project was left at this point.

The screen used is an ILI9341. My pin setup is a bit wierd, because my tests were done using an Arduino Uno TFT shield. Using an arduino mega shield like this, would be better. Then, pin assigments should be updated in the Tapudisk.ino file.

Libraries used:

Adafruit_GFX MCUFRIEND_kbv

Pinout: LCD_CS : Pin A3 LCD_CD : Pin A2 LCD_WR : Pin A1 LCD_RD : Pin A0 LCD_RESET A4

SD card CS : 53

IEC Pins:

ATN : Pin 25 CLOCK : Pin 27 DATA : Pin 23