- Power Supply
- Dev Board
- DC Jack
- WS2812B Strip with 60 LEDs/m
- ESP Board
- Terminal Block
- Wire Connector
- Software for the ESP Board
- WLED Usermod: wordclock
- Printed picture (used a local store fo this)
- Plexiglass
- Frame
- 3D Printer (I used a Creality CR-30 Printmill)
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
---|---|---|---|---|---|---|---|---|---|---|---|
1 | E | S | K | I | S | C | H | M | F | Ü | F |
2 | V | I | E | R | T | E | L | D | Z | Ä | Ä |
3 | Z | W | Ä | N | Z | G | S | I | V | O | R |
4 | A | B | O | H | A | L | B | I | E | P | M |
5 | E | I | S | Z | W | O | I | S | D | R | Ü |
6 | V | I | E | R | I | F | Ü | F | I | B | T |
7 | S | Ä | C | H | S | I | S | I | B | N | I |
8 | A | C | H | T | I | N | Ü | N | I | E | L |
9 | Z | Ä | N | I | E | R | B | E | L | F | I |
10 | Z | W | Ö | L | F | I | A | M | U | H | R |
The text is 166mm x 183mm.
The plexiglass I used is 335mm x 335mm.
My Setup is in swiss german, you can download and modify it or use your own one.
For my setup, just download the models.
Download the actual version from Aircookie's github and flash it to the ESP board.
You have to activate the wordclock usermod.