This is a Home Assistant integration for Electric Vehicle chargers that support the Open Charge Point Protocol.

• based on the Python OCPP Package.
• HACS compliant repository

• If you have not yet installed HACS, go get it at https://hacs.xyz/ and walk through the installation and configuration.

• In Home Assistant, select HACS / Integrations / + Explore & add repositories.

• Search for 'OCPP' and install the repository.

• In Home Assistant, select Configuration / Integrations / Add Integration.

• Search for 'OCPP' and add the integration.

• The default host address '0.0.0.0' will listen to all interfaces on your home assistant server.

• Select which measurands you would like to become available as sensor entities.

• On the OCPP integration, click on devices to navigate to your Charge Point device.

• At the bottom of the Entities panel, click on 'Add to Lovelace' to add the entities to your dashboard.

• Configure your charger to use the OCPP websocket of your Central System (e.g. ws:https://homeassistant.local:9000). This is charger specific, so consult your manual. Some chargers require the protocol section 'ws:https://' to be removed, or require the url to end with a '/'.

• You may need to reboot your charger before the changes become effective.

• Use the switches to unlock the charger and start the charging process.

All OCPP 1.6j compatible devices should be supported, but not every device offers the same level of functionality. So far, we've tried:

• ABB Terra AC-W7-G5-R-0
• ABB Terra AC-W11-G5-R-0
• Alfen - Eve Single Pro-line
• Alfen - Eve Single S-line
• CTEK Chargestorm Connected 2
• EVBox Elvi
• EVLink Wallbox Plus
• Evnex E Series & X Series Charging Stations (Ability to configure a custom OCPP server such as HA is being discontinued)
• Wallbox Pulsar
• Vestel EVC04-AC22SW

To enable debug logging for this integration and related libraries you can control this in your Home Assistant configuration.yaml file. Example:

logger:
  default: info
  logs:
    custom_components.ocpp: critical
    websocket: debug

After a restart detailed log entries will appear in /config/home-assistant.log.

If you need help, check out our forum or submit an issue.

It is recommended to use Visual Studio Code, and run home assistant in a devcontainer. See https://hacs.xyz/docs/developer/devcontainer

💡 Tip: If you like this project consider buying me a cocktail 🍹: